China high quality 1613688500 Rubber Gear Elastomer Tooth Flex Coupling Element Kit for CHINAMFG Screw Air Compressor Replacement Parts

Product Description

Product Description

16136885/1613982300

Type: Gear Flex Coupling

Applied: Atlas Copco

Certificate: iso 9001.

 

Coupling Selection Method

  • Torque – power [kW] • Speed [r/min]
  • Type of equipment and application
  • Shaft diameters
  • Shaft gaps
  • Physical space limitation
  • Special bore or finish information

Coupling Features

  • Good starting performance can change the load starting of the motor to no-load starting, so as to realize the soft starting of the working machine, reduce the current during starting and reduce the starting energy consumption.
  • Save electric energy and equipment cost, which can solve the unreasonable situation of the big horse-drawn trolley with load starting machine, save the motor capacity, improve the power factor and motor efficiency of the grid, reduce reactive power loss, save electric energy, and simplify the motor starting equipment and reduce equipment cost.
  • The transferred torque can be adjusted, easy to achieve overload protection.When the working machine is overloaded or jammed, the steel ball type safety coupling will slip automatically, which can prevent the motor from burning out and other parts damage.
  • Except for the starting and braking stages, the main and driven parts of the steel ball safety coupling have no speed difference, no friction loss and high transmission efficiency.
  • Nonmetallic elastic elements are adopted in the steel ball type safety coupling, which can compensate the offset of the linked 2 axes within a certain range, with a small amount of buffering and damping.
  • Reliable operation, stable performance, convenient installation, disassembly and maintenance.

 

Detailed Photos

 

Determining the right type of flexible coupling starts with the following analysis of the application:

  • Prime mover type (motor, diesel engine, etc.) of the drive side of the system
  • Actual horsepower and/or torque requirements, not prime motor-rated horsepower (note the range of variable torque caused by periodic or unstable loads, worst-case starting loads,
  • Drive system inertia related to prime mover inertia (data available from equipment supplier)
  • vibration, linear and torsional vibration (experienced supplier or consultant can help you evaluate vibration) shaft-to-shaft deviation;
  • Note the degree of Angle offset (axis is not parallel) and parallel offset (distance between axis centers when axes are parallel but not aligned);
  • Also note whether the drive/driven units share the same floor axial (inside/outside) axial motion,
  • whether they share distance (the distance between the drive end and the driven axis), and any other space-related restrictions.

 

We are able to offer a wide range of special couplings, which are based on your samples or drawings.

Due to the refinement of production operations and the high-end technology, we have been able to produce high-quality Rubber Coupling, Trolley Wheel, Flexible Coupling, Flexible Rubber Coupling, Industrial Rubber Coupling, Star Coupling, CHINAMFG type Coupling Spare and other products, widely used in industrial applications.

 

All these products are tested and checked against the set quality parameters before being sent to the customer. This shows that we are willing to provide our customers with updated and perfect product lines to meet their different needs. In addition, we also provide customized solutions to provide customers with a wide range of space, so that they can choose their favorite products according to their needs and requirements.
 

More Products for Choose

Coupling Coupling
1613949900 1613982300
1614873800 1613958500
165710800 165710800
162357100 1619646700
1615678500 165714700
1615682500 1604076100
1613982300 1626510900

Tips:
 
This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.
 

 

Company Profile

       Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment. Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.

Company team

Our company is located in the beautiful coastal city of HangZhou,is a professional manufacturer of air compressor filters and separators,

We repect the enterprise spirit of “steadyfastness,hard work and responsibility” and creat a good corporate environment based on the operation principle of “Integrity,reliability and innovation”.

 

 

With the survival idea of “perfect technology, good service and excellent quality”,
We always adhere to customer first,
aim at serving customer sincerely and touching customer with our service.

We plunge ourselves to provide clear and sustainable comprssed air to our customer,
meanwhile constantly pursue to save the sunning cost of compressor system for them.
Profession, concentration, focus is our corporate philosophy.

 

Packaging & Shipping

 

 

FAQ

 Q1. What is your product range?

A: Our products cover replacement hydraulic filter, Air compressor filters, Compressed air filter element, Heavy truck insert filters, Vacuum pump filters, and Some spare parts for compressors.

Q2. Is customized filter or OEM available? 
A: Yes, just offer your required specifications and drawings.

Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build new molds, but open new mold fee charged, when you place bulk order, the mold fee can return back.

Q4. What’s your terms of packing?
A: Generally, we pack our goods in neutral boxes,outside brown carton cases. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q5. What’s the terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balancing.

Q6. What’s your terms of delivery?
A: (1)FOB (2)CFR (3)CIF.

Q7. How about your delivery time?
A: Generally, under MOQ quantity take 5-7 working days after receiving your advance payment. The specific delivery time depends on models and the quantity of your order.

 

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

elastomeric coupling

Potential Causes of Failure in Elastomeric Couplings and Preventive Measures

Elastomeric couplings are generally robust and reliable components, but certain factors can lead to potential failures. Understanding these causes can help implement preventive measures to ensure optimal performance and longevity. Here are some common causes of failure and their prevention:

1. Overloading:

Exceeding the specified torque or power ratings of the elastomeric coupling can lead to premature failure. Preventive measures include selecting a coupling with appropriate torque and power ratings for the application and avoiding sudden load increases or over-torque conditions.

2. Misalignment:

Misalignment between the shafts connected by the coupling can result in increased stresses on the elastomeric element, leading to wear and failure. Regular alignment checks and adjustments can help prevent excessive misalignment.

3. Environmental Factors:

Harsh environmental conditions, such as extreme temperatures, chemicals, moisture, or corrosive substances, can degrade the elastomeric material over time. Choosing couplings with suitable materials and environmental protection can mitigate these effects.

4. Fatigue and Ageing:

Elastomeric materials can experience fatigue and aging due to cyclic loading and prolonged use. Regular inspection and replacement of couplings based on manufacturer recommendations can prevent failures caused by material deterioration.

5. Improper Installation:

Incorrect installation can lead to stress concentrations or uneven loads on the coupling, causing premature failure. Proper installation procedures, including following manufacturer guidelines, using appropriate tools, and ensuring proper shaft alignment, are essential to prevent installation-related issues.

6. Excessive Vibrations:

Excessive vibrations in the machinery can accelerate wear on the elastomeric coupling. Addressing the root causes of excessive vibrations, such as unbalanced loads or misaligned components, can help extend the coupling’s lifespan.

7. Contaminants:

Foreign particles, dirt, or debris can infiltrate the coupling and lead to abrasive wear or reduced flexibility. Regular cleaning and maintenance can prevent these issues.

8. Poor Maintenance:

Lack of routine inspection and maintenance can allow minor issues to escalate into major problems. Implementing a maintenance schedule that includes regular inspections, lubrication, and replacement of worn components can help identify and address potential failures before they occur.

By proactively addressing these potential failure causes, industrial operators can ensure reliable and efficient performance of elastomeric couplings, minimizing downtime, and reducing maintenance costs in the long run.

elastomeric coupling

Impact of Temperature Variation on Elastomeric Coupling Performance

Temperature variation can significantly affect the performance of elastomeric couplings due to the properties of the elastomeric material used in their construction. Here are the key ways temperature variation can influence coupling performance:

1. Elasticity and Flexibility:

Elastomeric materials exhibit changes in their elasticity and flexibility with temperature. At lower temperatures, the elastomer may become stiffer, reducing its ability to compensate for misalignments and absorb vibrations. Conversely, at higher temperatures, the elastomer may become softer, affecting the coupling’s torsional stiffness and load-carrying capacity.

2. Damping Characteristics:

Temperature changes can impact the damping characteristics of the elastomer. Elastomeric couplings rely on the damping properties of the material to absorb vibrations and shocks. Temperature-related variations can alter the material’s ability to dampen vibrations, affecting the coupling’s performance in reducing dynamic loads.

3. Wear and Degradation:

Elastomeric materials can undergo wear and degradation with temperature fluctuations. Excessive heat can accelerate the aging process of the elastomer, leading to material hardening, cracking, and reduced service life. Extreme temperature conditions may also cause the elastomer to soften and lose its structural integrity.

4. Tolerance to High Temperatures:

Some elastomeric couplings are designed to withstand higher temperatures than others. Extreme heat can cause traditional elastomeric materials to exceed their temperature limits, leading to failure or reduced performance. Specialized high-temperature elastomers or alternative materials may be required for applications operating in elevated temperature environments.

5. Torque and Power Ratings:

Temperature changes can influence the torque and power ratings of the elastomeric coupling. It is essential to consider the temperature variation when selecting a coupling for a specific application to ensure that it can handle the expected loads safely and reliably.

6. Environmental Conditions:

Elastomeric couplings operating in extreme temperature environments may also encounter other environmental factors like humidity, chemicals, and exposure to harsh substances, which can further impact the material properties and coupling performance.

To mitigate the effects of temperature variation on elastomeric coupling performance, it is crucial to select a coupling with suitable elastomeric material capable of withstanding the expected temperature range. Regular maintenance, periodic inspection, and adherence to the manufacturer’s temperature limits and guidelines will help ensure optimal performance and prolong the lifespan of the coupling in temperature-varying operating conditions.

elastomeric coupling

Limitations and Drawbacks of Using Elastomeric Couplings in Specific Scenarios

While elastomeric couplings offer several advantages, they may not be the ideal choice for every scenario. There are some limitations and drawbacks to consider, particularly in specific industrial applications. Here are some key points to be aware of:

1. Torque Capacity:

Elastomeric couplings may have limitations in handling high torque levels. In heavy-duty applications with significant torque requirements, a different type of coupling, such as a gear coupling or grid coupling, might be more suitable.

2. Temperature Range:

Elastomeric materials have temperature limitations. In environments with extreme temperatures, such as high-temperature industrial processes or cryogenic applications, elastomeric couplings may degrade or lose their flexibility, affecting their performance and lifespan.

3. Chemical Compatibility:

Some chemicals or aggressive substances may degrade the elastomeric material used in the coupling. In such cases, alternative coupling materials, like stainless steel or special coatings, should be considered.

4. High-Speed Applications:

In applications with high rotational speeds, elastomeric couplings might experience dynamic issues like resonance or flutter, which can lead to premature wear or failure. High-speed applications often require specialized couplings, such as disc couplings or diaphragm couplings.

5. Stiffness and Torsional Rigidity:

For applications requiring precise motion control or minimal angular deflection, elastomeric couplings might not provide the necessary stiffness or torsional rigidity. In such cases, rigid couplings or precision couplings are better suited.

6. Axial Load Handling:

Elastomeric couplings are primarily designed for torque transmission and misalignment compensation. They may not be suitable for handling significant axial loads between connected shafts.

7. Maintenance in Harsh Environments:

In environments with abrasive particles, high humidity, or other harsh conditions, elastomeric couplings might require more frequent maintenance to prevent premature wear.

8. Space Limitations:

Due to their flexible design, elastomeric couplings might require more space compared to some other coupling types. In compact or space-constrained applications, alternative couplings with more compact designs might be preferred.

Despite these limitations, elastomeric couplings remain highly versatile and effective in numerous industrial applications. However, it’s crucial to carefully consider the specific requirements and operating conditions of each application to determine whether an elastomeric coupling is the best choice or if an alternative coupling type might be more suitable.

China high quality 1613688500 Rubber Gear Elastomer Tooth Flex Coupling Element Kit for CHINAMFG Screw Air Compressor Replacement Parts  China high quality 1613688500 Rubber Gear Elastomer Tooth Flex Coupling Element Kit for CHINAMFG Screw Air Compressor Replacement Parts
editor by CX 2024-02-05