China best 1614873800 Rubber Gear Flex Coupling Element for CHINAMFG Screw Air Compressor

Product Description

 16148738

Type: Gear Flex Coupling

Applied: Atlas Copco

Certificate: iso 9 replace by Coupling Element 16148738 applies to the screw air compressor GA 90-160,807,1410 New.

Coupling Coupling
1613949900 1613982300
1614873800 1613958500
165710800 165710800
162357100 1619646700
1615678500 165714700
1615682500 1604076100
1613982300 1626510900

Coupling Features

  • Good starting performance can change the load starting of the motor to no-load starting, so as to realize the soft starting of the working machine, reduce the current during starting and reduce the starting energy consumption.
  • Save electric energy and equipment cost, which can solve the unreasonable situation of the big horse-drawn trolley with load starting machine, save the motor capacity, improve the power factor and motor efficiency of the grid, reduce reactive power loss, save electric energy, and simplify the motor starting equipment and reduce equipment cost.
  • The transferred torque can be adjusted, easy to achieve overload protection.When the working machine is overloaded or jammed, the steel ball type safety coupling will slip automatically, which can prevent the motor from burning out and other parts damage.
  • Except for the starting and braking stages, the main and driven parts of the steel ball safety coupling have no speed difference, no friction loss and high transmission efficiency.
  • Nonmetallic elastic elements are adopted in the steel ball type safety coupling, which can compensate the offset of the linked 2 axes within a certain range, with a small amount of buffering and damping.
  • Reliable operation, stable performance, convenient installation, disassembly and maintenance.

Determining the right type of flexible coupling starts with the following analysis of the application:

  • Prime mover type (motor, diesel engine, etc.) of the drive side of the system
  • Actual horsepower and/or torque requirements, not prime motor-rated horsepower (note the range of variable torque caused by periodic or unstable loads, worst-case starting loads,
  • Drive system inertia related to prime mover inertia (data available from equipment supplier)
  • vibration, linear and torsional vibration (experienced supplier or consultant can help you evaluate vibration) shaft-to-shaft deviation;
  • Note the degree of Angle offset (axis is not parallel) and parallel offset (distance between axis centers when axes are parallel but not aligned);
  • Also note whether the drive/driven units share the same floor axial (inside/outside) axial motion,
  • whether they share distance (the distance between the drive end and the driven axis), and any other space-related restrictions.

 

 

Other Couplings:

 

 

We are able to offer a wide range of special couplings, which are based on your samples or drawings.

Due to the refinement of production operations and the high-end technology, we have been able to produce high-quality Rubber Coupling, Trolley Wheel, Flexible Coupling, Flexible Rubber Coupling, Industrial Rubber Coupling, Star Coupling, CHINAMFG type Coupling Spare and other products, widely used in industrial applications.

 

All these products are tested and checked against the set quality parameters before being sent to the customer. This shows that we are willing to provide our customers with updated and perfect product lines to meet their different needs. In addition, we also provide customized solutions to provide customers with a wide range of space, so that they can choose their favorite products according to their needs and requirements.

 

Company Profile&Certifications:

      Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment. Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.

 

FAQ:

Q1. What is your product range?
A: Our products cover replacement hydraulic filter, Air compressor filters, Compressed air filter element, Heavy truck insert filters, Vacuum pump filters, and Some spare parts for compressors.

Q2. Is customized filter or OEM available? 
A: Yes, just offer your required specifications and drawings.

Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build new molds, but open new mold fee charged, when you place bulk order, the mold fee can return back.

Q4. What’s your terms of packing?
A: Generally, we pack our goods in neutral boxes,outside brown carton cases. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q5. What’s the terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balancing.

Q6. What’s your terms of delivery?
A: (1)FOB (2)CFR (3)CIF.

Q7. How about your delivery time?
A: Generally, under MOQ quantity take 5-7 working days after receiving your advance payment. The specific delivery time depends on models and the quantity of your order.

Q8. What’s your sample policy?
A: ,,,.

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

elastomeric coupling

Potential Causes of Failure in Elastomeric Couplings and Preventive Measures

Elastomeric couplings are generally robust and reliable components, but certain factors can lead to potential failures. Understanding these causes can help implement preventive measures to ensure optimal performance and longevity. Here are some common causes of failure and their prevention:

1. Overloading:

Exceeding the specified torque or power ratings of the elastomeric coupling can lead to premature failure. Preventive measures include selecting a coupling with appropriate torque and power ratings for the application and avoiding sudden load increases or over-torque conditions.

2. Misalignment:

Misalignment between the shafts connected by the coupling can result in increased stresses on the elastomeric element, leading to wear and failure. Regular alignment checks and adjustments can help prevent excessive misalignment.

3. Environmental Factors:

Harsh environmental conditions, such as extreme temperatures, chemicals, moisture, or corrosive substances, can degrade the elastomeric material over time. Choosing couplings with suitable materials and environmental protection can mitigate these effects.

4. Fatigue and Ageing:

Elastomeric materials can experience fatigue and aging due to cyclic loading and prolonged use. Regular inspection and replacement of couplings based on manufacturer recommendations can prevent failures caused by material deterioration.

5. Improper Installation:

Incorrect installation can lead to stress concentrations or uneven loads on the coupling, causing premature failure. Proper installation procedures, including following manufacturer guidelines, using appropriate tools, and ensuring proper shaft alignment, are essential to prevent installation-related issues.

6. Excessive Vibrations:

Excessive vibrations in the machinery can accelerate wear on the elastomeric coupling. Addressing the root causes of excessive vibrations, such as unbalanced loads or misaligned components, can help extend the coupling’s lifespan.

7. Contaminants:

Foreign particles, dirt, or debris can infiltrate the coupling and lead to abrasive wear or reduced flexibility. Regular cleaning and maintenance can prevent these issues.

8. Poor Maintenance:

Lack of routine inspection and maintenance can allow minor issues to escalate into major problems. Implementing a maintenance schedule that includes regular inspections, lubrication, and replacement of worn components can help identify and address potential failures before they occur.

By proactively addressing these potential failure causes, industrial operators can ensure reliable and efficient performance of elastomeric couplings, minimizing downtime, and reducing maintenance costs in the long run.

elastomeric coupling

Impact of Elastomeric Material Elasticity on Coupling Performance

The elasticity of the elastomeric material is a critical factor that significantly influences the performance of elastomeric couplings. The elasticity, or flexibility, of the elastomer allows the coupling to accommodate misalignment and torsional vibrations, providing several important benefits:

1. Misalignment Compensation:

Elastomeric couplings can handle various types of misalignment, including angular, parallel, and axial misalignments. The elasticity of the elastomer allows it to flex and absorb the misalignment between the connected shafts, reducing stress on the coupling and connected machinery.

2. Vibration Damping:

The elastomeric material acts as a natural vibration isolator, dampening torsional vibrations and shocks that occur during operation. This damping effect helps protect the connected equipment from excessive vibrations and reduces the risk of fatigue failure.

3. Shock Load Abselastomeric coupling

Advantages of Using Elastomeric Couplings in Industrial Applications

Elastomeric couplings offer several advantages that make them well-suited for various industrial applications. These advantages stem from their flexible design and the use of elastomeric materials like rubber or polyurethane. Below are the key benefits of using elastomeric couplings:

1. Misalignment Compensation:

Elastomeric couplings can tolerate and compensate for angular, parallel, and axial misalignments between connected shafts. This ability to handle misalignment reduces stress on equipment and extends the lifespan of both the coupling and the connected machinery.

2. Vibration and Shock Absorption:

The elastomeric material in the coupling acts as a natural vibration isolator, absorbing shocks and dampening vibrations. This feature is essential for reducing noise, protecting sensitive components, and enhancing the overall smoothness of operation in industrial systems.

3. No Lubrication Required:

Elastomeric couplings do not need regular lubrication, making them low-maintenance solutions for many industrial applications. This reduces the time and effort spent on maintenance tasks and minimizes the risk of contamination or leakage in certain environments.

4. Cost-Effectiveness:

Compared to some other types of couplings, elastomeric couplings are generally more cost-effective. Their simple construction and use of elastomeric materials make them affordable choices for power transmission in various industries.

5. Electrically Insulating:

Elastomeric couplings are electrically insulating, which can be advantageous in applications where electrical isolation is necessary to prevent current flow between shafts or connected equipment.

6. Fail-Safe Design:

In the event of elastomeric material failure, elastomeric couplings have a fail-safe design that allows them to continue transmitting torque, albeit with some reduction in performance. This feature ensures continued operation and prevents sudden catastrophic failures.

7. Easy Installation:

Elastomeric couplings are relatively simple to install, saving time and effort during the setup of industrial machinery.

8. Diverse Industrial Applications:

Elastomeric couplings find use in various industrial applications, including pumps, compressors, conveyor systems, machine tools, blowers, fans, and more.

Due to their ability to handle misalignment, provide vibration dampening, and require minimal maintenance, elastomeric couplings are widely utilized in industrial settings where reliability, efficiency, and cost-effectiveness are critical considerations.

China best 1614873800 Rubber Gear Flex Coupling Element for CHINAMFG Screw Air Compressor  China best 1614873800 Rubber Gear Flex Coupling Element for CHINAMFG Screw Air Compressor
editor by CX 2024-02-26

China wholesaler Ductile Iron Grooved Rigid Coupling

Product Description

China JUNTONG,Focus on “making production” with spirit of craftsman like reliable,experienced,professional,great HangZhou CHINAMFG Machinery Auxiliaries Co.,Ltd.is established in 2004,Casting from 1997,is a professional manufacturer specialized in the R&D,production,sale and service of ductile iron Grooved Couplings and Pipe Fittings. Located in HangZhou,we enjoy convenient transportation access and comfortable environment.
Strong and Powerful.Our company is a large enterprise group composed of 1 main factory,three branch factories which covers an area of 68000 and has an annual production capacity of more than 50000 tons.We have an experienced team,around 500 skilled staff members ,20 percent of them are engineers and technicians who are professional and hardworking.four factories
With a wide range,good quality,reasonable prices and stylish designs,our products are extensively used in drinking water,fire control,medicine,chemistry and other industries.
Top Quality.Selling well in all cities and provinces around China,our products are also exported to clients in many countries and regions.In addition,We also welcome OEM and ODM orders.We have widely recognized by customers and enjoy a good reputation across the world .The company was approved by iso9001,14001,18001.Gradually,the company has acquired most of the authoritative certifications,including CE,FM and UL.
State of the art equipment.Our company has the state-of-the-art-equipment for both production and inspection .We equipped with  8 automation molding line,2automation sand mixing line70,CNC lathe,10WINTER mold machining center ,5automatic box sealing line,7paiting lines and so on.
Reliable Quality Assurance.We conduct strict quality inspections over each batch.We have a very professional laboratory with full serious of testing and inspection as Leak testing,raw material receiving inspection,batch chemical composition inspection,Microstructure testing,Advanced spectrometer ,dimension inspection,first article inspection,in-process inspection and final visual inspection.In order to ensure high quality.
In recent years,guaranteeing stable and timely supply,credible quality and sincere service,our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.
We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success! Product Application   FM/UL Approved ASTM A536 Ductile Iron Grooved Couplings and Grooved Fittings 
JUNT  Grooved Piping System
The JUNT grooved piping system is 1 of the most advanced, versatile, economical and reliable systems available today. After the pipe ends are grooved a gasket is stretched over the pipe ends. The coupling segments are then placed over the gasket and the bolts and nuts are fastened resulting In a secure and leak free joint.
A coupling can be installed 3-4 times faster than a comparable welded or brazed joint and there is no need fora flame or welding CHINAMFG on the job site. A coupling can be installed by fastening a pair of bolts and nuts while using only a wrench or spanner, whereas a comparable flanged joint requires the fastening of many bolts and nuts with a pair of wrenches. The grooved system allows for easy material take-offs and unlike a threaded system, there is no need to allow for added pipe length for thread engagement. With the removal of just a few bolts 1 can easily access the system for cleaning, maintenance, changes and or system expansion.

SPECIFICATIONS FOR GROOVED COUPLINGS AND FITTINGS
MATERIAL Ductile iron QT450-12 ,Ductile Iron to ASTM A536
CERTIFICATE FM UL CE CUL ISO
PRESSURE 300PSI   2.5MPA
THREAD TYPE BSPT   NPT
SURFACE TREATMENT PAINT, EPOXY, GALVANIZED, DACROMET
DELIVERY TIME Normally within 15-30 days 
PAYMENT TERMS T/T, LC

 

 
 
 Main Features1) Ductile iron ASTM A536 GRADE 65-45-12
2) FM,UL ,CE,IOS,CUL CERTIFICATES
3) CHINAMFG RUBBER GASKET 
4) PAINT RAL-3000,ORANGE,GALVANIZED 
5) 300PSI ,500PSI ,2.5MPA
Certifications
 
 
 
 
Detailed Images
 Main FeaturesName:  Grooved Couplings and Fittings
Brand: JUNT  
Original:CHINA 
1) Ductile iron ASTM A536 GRADE 65-45-12
2) FM,UL ,CE,IOS,CUL CERTIFICATES
3) CHINAMFG RUBBER GASKET 
4) PAINT RAL-3000,ORANGE,GALVANIZED 
5) 300PSI ,500PSI ,2.5MPA
 Housing FeaturesName: Coupling Housing 
Brand:  JUNT
Original: CHINA
Ductile Iron: Standard coupling housings and fittings are made of ductile Iron conforming to ASTM A536 Gr.65-45-12. The properties of Grade 65-45-12 ductile iron are as follows;65,000 CHINAMFG (448 MPa) tensile strength, 45,000 CHINAMFG (310 MPa) yield strength and 12% elongation.
 
 Machine Parts

Name: BULTS AND NUTS
Brand: JUNT
Original: CHINA
Domestic famous materials, Oval Neck bolts and heavy hoxagon nuts at ASTM A183/ISO 898,GRADE 8.8,HOT GALVANIZED.
JUNT products utilize oval neck track bolts and heavy duty hex nuts,available either in UNC threaded or ISO metric threaded*. The oval neck track bolts mate into the oval holes in the housing segments to allow for easy tightening using only a single wrench/spannerMain Parts

Name: Rubber Gaskets
Brand: JUNT 
Original: CHINA
EPDM,SILICON RUBBER,PRE-LUBRICANT
During assembly the gasket is first stretched over the pipe ends which forms the initial seal. As the housing segments are installed and secured the pressure responsive gasket is slightly compressed to form a leak-tight joint. The strength of the seal is further enhanced by internal line pressure that creates downward pressure on the lips of the gasket. 
 
Our Service
 

 Pre-Sales Service
* Inquiry and consulting support. 
* Sample testing support. 
* View our Factory.After-Sales Service
* Training how to instal the machine, training how to use the machine. 
* Engineers available to service machinery overseas.
* Attend exhibition
Packing & Delivery
 

Pallets Packaging
Size 110 (L) * 110 (W) * 12 (H)
Weight 0.6-1.2 T
 
 
 
Packaging Details
The normal package is pallet with  carton box (Size: L*W*H).If container is too tigher,we will use pe film for packing or pack it according to customers special request.

 

Carton Box
Size S and L  Type
Weight 12-50KG
 
 
 
Packaging Details
Two Sizes Type:
1. Small One(S)
353 (L) * 353 (W) * 155 (H)
2. Large One (L)
353 (L) * 353 (W) * 310 (H)

Related Products
 
ROLL GROOVING MACHINE
HOLE CUTTING MACHIE
PIPE CUTTING MACHINE
 

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

rigid coupling

Can Rigid Couplings Handle Misalignment Between Shafts?

Rigid couplings are not designed to handle misalignment between shafts. Unlike flexible couplings that can accommodate slight misalignment through their bending or elastic properties, rigid couplings are intended to provide a fixed and immovable connection between two shafts. As a result, any misalignment between the shafts can lead to increased stress and uneven loading on connected components.

It is essential to ensure precise alignment when using rigid couplings to avoid premature wear and failure of the system. The shafts must be perfectly aligned in both the axial and angular directions before installing the rigid coupling. Proper alignment helps distribute the load evenly and reduces stress concentration on specific areas, such as bearings and keyways.

If a system requires some level of misalignment compensation due to factors like thermal expansion or slight shaft deflection, a flexible coupling should be considered instead. Flexible couplings can tolerate small degrees of angular and axial misalignment while still transmitting torque efficiently and protecting the connected equipment from excessive stress and wear.

In summary, rigid couplings are best suited for applications where precise shaft alignment can be achieved and maintained, while flexible couplings are more appropriate for systems with potential misalignment or other dynamic factors that require some degree of flexibility.

rigid coupling

Factors to Consider When Choosing a Rigid Coupling for a Specific System

Choosing the right rigid coupling for a specific system is crucial to ensure proper functionality and reliable performance. Several factors should be considered when making this decision:

1. Shaft Size and Compatibility: The most fundamental factor is ensuring that the rigid coupling is compatible with the shaft sizes of the connected components. The coupling should have the appropriate bore size and keyway dimensions to fit securely onto the shafts.

2. Operating Torque: Consider the torque requirements of the application. The rigid coupling should have a torque rating that exceeds the maximum torque expected during operation to prevent failures and ensure safety.

3. Speed: Determine the rotational speed (RPM) of the connected shafts. Rigid couplings have maximum RPM limits, and the selected coupling should be capable of handling the system’s operating speed.

4. Misalignment Tolerance: Assess the potential misalignment between the shafts. Rigid couplings provide no flexibility, so the system must have minimal misalignment to prevent excessive forces on the components.

5. Temperature and Environment: Consider the operating temperature range and the environment where the coupling will be used. Ensure the chosen material can withstand the temperature and any corrosive or harsh conditions present.

6. Space Limitations: Evaluate the available space for the coupling. Rigid couplings have a compact design, but ensure that there is enough clearance for installation and maintenance.

7. Backlash and Torsional Stiffness: In some precision systems, backlash must be minimized to maintain accurate positioning. Additionally, the torsional stiffness of the coupling can impact system response and stability.

8. Keyway or Keyless Design: Decide between a coupling with a keyway or a keyless design based on the specific application requirements and ease of installation.

9. Material Selection: Consider the material properties of the rigid coupling. Common materials include steel, stainless steel, and aluminum, each with its own advantages and limitations.

10. Maintenance: Determine the maintenance requirements of the coupling. Some couplings may need periodic lubrication or inspections, while others may be maintenance-free.

11. Cost: While cost should not be the sole consideration, it is essential to evaluate the cost-effectiveness of the coupling, taking into account its performance and longevity.

By carefully considering these factors, you can select the most suitable rigid coupling for your specific system, ensuring optimal performance, and longevity of your mechanical setup.

rigid coupling

Advantages of Using Rigid Couplings in Mechanical Systems:

Rigid couplings offer several advantages when used in mechanical systems. These advantages make them a preferred choice in certain applications where precise alignment and high torque transmission are essential. Here are the key advantages of using rigid couplings:

  • 1. High Torque Transmission: Rigid couplings are designed to handle high torque and power transmission without any loss due to flexibility. They provide a direct and solid connection between shafts, allowing for efficient transfer of rotational motion.
  • 2. Precise Alignment: Rigid couplings maintain precise alignment between connected shafts. When installed correctly, they ensure that the two shafts are perfectly aligned, which is crucial for applications where accurate positioning and synchronization are required.
  • 3. Synchronous Rotation: The rigid connection provided by these couplings enables synchronous rotation of the connected shafts. This is particularly important in applications where components must move in precise coordination with each other.
  • 4. Simple Design: Rigid couplings have a straightforward design with minimal moving parts. This simplicity makes them easy to install and maintain, reducing the chances of mechanical failure.
  • 5. Cost-Effective: Compared to some other coupling types, rigid couplings are generally more cost-effective. Their simple design and robust construction contribute to their affordability.
  • 6. High Strength and Durability: Rigid couplings are typically made from strong and durable materials such as steel, stainless steel, or aluminum. These materials can withstand heavy loads and provide long-lasting performance in demanding applications.

Rigid couplings are commonly used in various industries and applications, including high-precision machinery, robotics, automation systems, precision motion control, and machine tools. They are especially beneficial in scenarios where misalignment needs to be minimized or avoided altogether.

It’s important to note that while rigid couplings offer these advantages, they are not suitable for applications where shaft misalignment or shock absorption is required. In such cases, flexible couplings or other specialized coupling types may be more appropriate.

China wholesaler Ductile Iron Grooved Rigid Coupling  China wholesaler Ductile Iron Grooved Rigid Coupling
editor by CX 2024-02-26

China Standard Custom Plastic POM Curved Toothed Gear, PA6 Spur Gear Coupling gear coupling

Product Description

Our Services

                                                            Product Design                                        Material Selection
                                                            Mold Design                                             Mold Making
                                                            Bulk Production                                        Logo Printing
                                                            Surface Treatment                                    Assembling
                                                            Packaging                                                 Door to Door Delivery

Product Details

 

Material Nylon ,mc nylon, POM,ABS,PU,PP,PE,PTFE,UHMWPE,HDPE,LDPE, PVC,etc.
Color Black, white, red, green, transparent or any color according to Pantone code
Size As per customer’s requirements
Technology Injection molding, CNC machining, Extrusion
Surface Treatment Powder coating, Zinc coating, Galvanization, Electro-deposition coating, Chrome/zinc/nickel plating, Polishing, Silkscreen, Black oxide
Application Automotive, ATV, Mechanical equipment, Construction, Home appliance, Aviation,
Office facilities, Agriculture, etc.
Shippment We have longterm cooperation with internation shipping agent and express company, so that shipping safty and arriving time are secured

Detail Image

Our Factory

Our Certification

Zhongde is an SGS-verified manufacturer. We have passed ISO9001:2005 quality control certification as well as environment management certification.
Our Factory

    CHINAMFG is a leading manufacture of OEM parts in rubber & plastic & metal parts. We are always pursuing providing better quality products in shorter period. With a knowledgeable team which has experience in molding and production, we are confident to help you develop and manufacture your product.
Our Machine
We have different types of machines to meet different requriements. Most our machines were imported from overseal. The highest rotate speed of CNC machining center can reach to 20,000RPM. The largest vulcanize rubber machine can produce rubber parts within 3000mm.

Customization Capabilities

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flange coupling

What Is a Gear Coupling and How Does It Work?

A gear coupling is a type of mechanical coupling that connects two shafts together to transmit torque and rotational motion between them. It consists of two gear-like hubs with external teeth that mesh together and transmit torque via the engagement of the teeth. The gear teeth on the hubs allow for high torque transmission and provide flexibility to accommodate misalignments between the shafts.

The working principle of a gear coupling can be summarized as follows:

1. Gear Hubs: A gear coupling consists of two hubs, each attached to the respective shafts that need to be connected. The hubs have external gear teeth that mesh together when the coupling is assembled.

2. Gear Teeth Engagement: When the two gear hubs are brought together during installation, the gear teeth on one hub mesh with the corresponding teeth on the other hub. This meshing creates a strong mechanical connection between the two shafts.

3. Torque Transmission: As the connected shafts rotate, the gear teeth engage and transmit torque from one shaft to the other. The gear coupling can handle high torque loads, making it suitable for heavy-duty applications.

4. Misalignment Compensation: One of the key advantages of a gear coupling is its ability to accommodate various types of misalignment, including angular, parallel, and axial misalignments between the connected shafts. This misalignment compensation helps reduce stress on the connected equipment and prevents premature wear.

5. Lubrication: Gear couplings may require lubrication to reduce friction between the gear teeth and ensure smooth operation. Proper lubrication helps improve the efficiency and longevity of the coupling.

Gear couplings are commonly used in various industrial applications, such as power generation, steel mills, mining, and heavy machinery. They offer high torque capacity, excellent misalignment accommodation, and reliability, making them a preferred choice for transmitting power in demanding environments.

China Standard Custom Plastic POM Curved Toothed Gear, PA6 Spur Gear Coupling  gear couplingChina Standard Custom Plastic POM Curved Toothed Gear, PA6 Spur Gear Coupling  gear coupling
editor by CX 2024-02-26

China Standard Steel Alloy Aluminum Drop Forging Hydrodynamic Fluid Coupling

Product Description

Steel alloy aluminum drop forging hydrodynamic fluid coupling

   Muyang machinery is a manufacturer with the capability of comprehensive services of casting, forging and machining, committed to the production of customized parts. Since established in 2002 (former Miaosen Machinery Co., Ltd), we’ve been supplying to the global market for over 15 years, served industries include automotive, railway, gas and oil, medical machinery, construction machinery, gym equipment, etc.

 

Process

Hot forging, cold forging, die forging with secondary service

Material

Carbon steel: A36,1045,1035 etc., Alloy steel: 40Cr, 20CrMnTi, 20CrNiMo,42CrMo4 etc., Stainless steel, SS304,SS316 etc.

Standard

ISO, DIN, ASTM, BS etc.

Weight

0.1kg – 20kg (in accordance with product structure)

Applicable Machining Process

CNC Machining/ Lathing/ Milling/ Turning/ Boring/ Drilling/ Tapping/ Broaching/Reaming etc.

Machining Tolerance

±0.005mm

Machined Surface Quality

Ra0.8-Ra3.2 according to customer requirement

Applicable Heat Treatment

Normalization, Quenching and tempering, Case

Hardening, Nitriding, Carbon Nitriding, Induction Quenching

Applicable Finish Surface Treatment

Shot/sand blast, polishing, Surface passivation, Primer Painting , Powder coating, ED- Coating, Chromate Plating, zinc-plate, Dacromat coating, Finish Painting

Testing equipment

Supersonic inspection machine, Supersonic flaw detecting machine , Physics and chemical analysis etc.

Packing

Wooden cases or according to customers’ requirement

MOQ of mass production

1000-5000pcs ( in accordance with actual condition)

 

 

 

 

 

 

 

 


We promise our clients 
careful, safe and tight package for exporting!

 

Standard packing: pearl cotton/bubble bag + carton box + pallet/wooden box

Special packingcustom packaging + wooden box

 

 

FAQ

1. Are you a manufacturer or trading company?
We’re a manufacturer with self-export rights. 

2. What’s your main business?
Our main business is custom metal parts processed by CNC machining, casting, forging etc., served industries including railway, automobile, construction machinery, gym equipment, water gas and oil.

3. Directly get to CONTACT or send your product drawing/inquiries to email, we will reply within 1 hour.
  

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

fluid coupling

Factors Influencing the Thermal Performance of a Fluid Coupling

The thermal performance of a fluid coupling, specifically its ability to dissipate heat and maintain operating temperatures within acceptable limits, is influenced by several factors:

  • Power Rating: The power rating of the fluid coupling, which indicates its capacity to handle a specific amount of power, affects its thermal performance. Higher power ratings generally result in higher heat generation, so it’s essential to choose a fluid coupling with an adequate power rating for the application.
  • Operating Speed: The operating speed of the fluid coupling is a critical factor. Higher speeds can lead to increased heat generation due to friction and viscous losses. It’s essential to consider the operating speed to ensure the fluid coupling can handle the heat produced at the given speed.
  • Ambient Temperature: The ambient temperature of the environment in which the fluid coupling operates also plays a role in its thermal performance. Higher ambient temperatures can impact the cooling efficiency and may lead to increased operating temperatures.
  • Load Variation: Applications with varying loads can experience changes in heat generation. Fluid couplings used in such systems must be capable of handling the thermal effects of load fluctuations without exceeding temperature limits.
  • Cooling Method: The cooling method employed in the fluid coupling design significantly affects its thermal performance. Some fluid couplings use natural convection for cooling, while others incorporate forced cooling methods such as internal or external cooling circuits. The cooling system’s efficiency directly impacts the ability to dissipate heat effectively.
  • Fluid Properties: The properties of the fluid inside the coupling, such as viscosity and heat capacity, influence thermal performance. The choice of fluid can affect the amount of heat generated and the efficiency of heat dissipation.
  • Operating Time: The duration of operation also affects the thermal behavior of the fluid coupling. Continuous operation or extended duty cycles may lead to higher operating temperatures, requiring careful consideration during selection.
  • Proper Maintenance: Regular maintenance, including lubricant inspection and replacement, is crucial for optimal thermal performance. Contaminated or degraded fluid can impact the heat transfer characteristics of the coupling.

It’s essential to consider these factors when selecting a fluid coupling to ensure that it can effectively manage heat generation and maintain safe operating temperatures in the specific application.

fluid coupling

Role of Fluid Coupling in Reducing Mechanical Stress on Connected Equipment

A fluid coupling is a mechanical device used to transmit power between two shafts without direct physical contact. It plays a crucial role in reducing mechanical stress on connected equipment, offering several benefits in various industrial applications. Here’s how a fluid coupling achieves this:

  • Smooth Power Transmission: Fluid couplings use hydraulic principles to transmit torque. When the input shaft (driving shaft) rotates, it imparts motion to the fluid inside the coupling. The fluid transmits torque to the output shaft (driven shaft) through the hydraulic coupling, resulting in smooth and gradual power transmission. This eliminates sudden jerks and mechanical shocks that could otherwise lead to increased stress on connected equipment.
  • Damping Effect: Fluid couplings act as a damping element, absorbing vibrations and torsional oscillations from the driving shaft. This damping effect helps reduce mechanical stress on connected equipment by mitigating the impact of sudden load changes and torsional vibrations that may occur during start-ups, shut-downs, or varying operating conditions.
  • Torque Limiting: In high-load situations, a fluid coupling can provide torque limiting capabilities. When the load exceeds a certain threshold, the fluid coupling slips, preventing excessive torque from reaching the driven shaft. This feature acts as a protective mechanism, preventing overloading and mechanical stress on both the coupling and connected equipment.
  • Shock Absorption: In applications where shock loads or overloads are common, a fluid coupling can absorb and dampen the impact of such events. This ability to cushion shocks prevents abrupt changes in torque and rotational speed, reducing mechanical stress and potential damage to the equipment.
  • Speed Control: In certain applications, fluid couplings can facilitate speed control of the driven shaft by adjusting the amount of fluid in the coupling. The ability to control the speed of connected equipment without abrupt changes contributes to smoother operation and lower mechanical stress.

By incorporating a fluid coupling into a power transmission system, mechanical stress on connected equipment can be significantly reduced, leading to improved equipment reliability, extended component life, and reduced maintenance costs. Fluid couplings are commonly used in heavy machinery, conveyors, crushers, mining equipment, marine propulsion systems, and various other industrial applications where smooth and controlled power transmission is critical.

It is important to select the appropriate fluid coupling size, type, and features based on the specific application requirements to ensure optimal performance and stress reduction. Regular maintenance and adherence to the manufacturer’s guidelines are essential to preserve the benefits of using fluid couplings and maintain their effectiveness in reducing mechanical stress on connected equipment.

fluid coupling

Use of Fluid Couplings in Horizontal and Vertical Shaft Arrangements

Yes, fluid couplings can be used in both horizontal and vertical shaft arrangements, providing flexible power transmission solutions for various industrial applications.

1. Horizontal Shaft Arrangements:

In horizontal shaft arrangements, the fluid coupling is installed between the driving and driven shafts, which are positioned horizontally and parallel to each other. The fluid coupling allows torque to be transmitted smoothly from the driving shaft to the driven shaft, enabling the machinery or equipment to start up gradually without abrupt shocks or overloading. This feature is especially beneficial in applications where heavy loads need to be accelerated smoothly, such as conveyors, crushers, and pumps.

2. Vertical Shaft Arrangements:

In vertical shaft arrangements, the fluid coupling is used to connect the driving and driven shafts, which are positioned vertically and aligned on top of each other. The fluid coupling allows for torque transmission and controlled acceleration, just like in horizontal arrangements. Vertical shaft fluid couplings are commonly used in applications such as vertical conveyors, hoists, and elevators, where they provide smooth starting and stopping of the equipment, preventing sudden jolts and reducing stress on the machinery.

Fluid couplings offer versatility in power transmission and are adaptable to various shaft arrangements, making them suitable for a wide range of industrial setups. Whether the application involves horizontal or vertical shafts, fluid couplings play a crucial role in enhancing the performance, safety, and efficiency of power transmission systems.

China Standard Steel Alloy Aluminum Drop Forging Hydrodynamic Fluid Coupling  China Standard Steel Alloy Aluminum Drop Forging Hydrodynamic Fluid Coupling
editor by CX 2024-02-26

China best FM Approved Different Types Stainless Steel Flexible Disc Coupling

Product Description

high pressure flexible coupling Flexible Disc Couplings
MODEL 77C STAINLESS STEEL HIGH PRESSURE FLEXIBLE COUPLING(SS-1200)
 
Sizes-Inches/DN
 
3/4 to 12inch(DN20 to DN300)
 
Rated  working pressure:
 
1200 psi (83 bar) Sch. 40S, cut groove only
 
 
MODEL 77C MATERIAL SPECIFICATIONS
 
 
Housings:
 
Super duplex 2507 (CE3MN) to ASTM A890 Grade 5A
 
CE8MN to ASTM A890 Grade 2A
 
Duplex 2205(CD3MN)to ASTM A890 Grade 4A
 
Austenic 254SMO (CK3MCuN)to A743
 
Austenic 904L(CN2MCuN)to A351
 
Type 316 to ASTM A743 CF8M
 
Type 316L to ASTM A743 CF3M

Technical parameter:

Product coupling
Material stainless steel 316,304; brass; aluminium; PP
Place of origin china
Type  A / B / C / D / E / F / DC / DP / AA / DD / AD
Thread NPT/BSP/BSPT/DIN2828.
Assembly   parts stainless steel,  brass,  aluminium handles,  
pins rings and safety pins
Connection male / female
Size 1/2″-6″;DN15-DN150
Gasket buna(NBR),viton  and   teflon,  silica
Test  pressure 3/4″-2″   250PSI(17.6bar);3″-4″  200PSI(14.8bar);
21/2″  225PSI(15.8bar);6″150PSI(10.5bar)
Workmanship precision casting or forged
Application petroleums,textiles,minings,brewings,  
inks,  dyes,  paper  mills,   processing  plants

Packing:

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

disc coupling

Comparison of Disc Couplings with Other Coupling Types

When comparing disc couplings with other coupling types like jaw couplings and elastomeric couplings, several factors come into play:

  • Flexibility: Disc couplings offer high flexibility and misalignment compensation, similar to elastomeric couplings, making them suitable for applications with angular, axial, and parallel misalignment.
  • Torsional Stiffness: Jaw couplings are known for their high torsional stiffness, which is suitable for precision applications. Disc couplings offer a balance between flexibility and stiffness.
  • Misalignment Compensation: Disc couplings excel in accommodating misalignment, whereas elastomeric couplings and jaw couplings are better suited for lower degrees of misalignment.
  • Vibration Damping: Elastomeric couplings provide excellent vibration damping due to their rubber elements. Disc couplings can also dampen vibrations to some extent.
  • Compactness: Jaw couplings and elastomeric couplings are relatively compact, making them suitable for space-constrained applications. Disc couplings are larger in size but offer higher torque capacity.
  • Torque Capacity: Disc couplings generally have higher torque capacity compared to elastomeric couplings and jaw couplings.
  • Installation and Maintenance: Disc couplings and elastomeric couplings are typically easier to install and require less maintenance compared to jaw couplings.
  • Material Options: All three coupling types are available in various materials, allowing for compatibility with different environments.

The choice between disc couplings, jaw couplings, and elastomeric couplings depends on the specific requirements of the application, including torque, misalignment, vibration, and stiffness considerations. Each coupling type has its strengths, and selecting the right one involves evaluating these factors to achieve optimal performance and reliability.

disc coupling

Maintaining and Extending the Lifespan of Disc Couplings

Proper maintenance is crucial to ensure the longevity and reliable performance of disc couplings. Here are the best practices:

  1. Regular Inspections: Conduct visual inspections to identify signs of wear, corrosion, or damage. Regular checks help detect issues early.
  2. Lubrication: Follow manufacturer recommendations for lubrication intervals and use the appropriate lubricants. Proper lubrication reduces friction and wear between disc elements.
  3. Alignment: Ensure proper alignment of the coupling and connected shafts. Misalignment can lead to premature wear and decreased coupling efficiency.
  4. Torque Monitoring: Monitor torque levels and load variations to identify abnormal fluctuations. Address sudden changes promptly to prevent further damage.
  5. Vibration Analysis: Use vibration analysis tools to detect and mitigate excessive vibration. Vibration can accelerate wear and affect machinery performance.
  6. Temperature Management: Monitor operating temperatures to avoid overheating. Excessive heat can lead to premature wear and material degradation.
  7. Load Consideration: Ensure the coupling is not subjected to loads beyond its capacity. Overloading can lead to accelerated wear and potential failure.
  8. Environmental Factors: Protect the coupling from contaminants, moisture, and corrosive substances that can accelerate deterioration.
  9. Timely Repairs: Address any identified issues promptly. Replace worn or damaged components to prevent further degradation.
  10. Professional Assistance: If you encounter complex issues, consider involving experienced technicians or engineers for diagnosis and repair.

Following these practices helps maintain optimal performance, extend the lifespan of disc couplings, and contribute to the overall efficiency and reliability of machinery systems.

disc coupling

Challenges and Solutions for Misaligned Disc Couplings

Misalignment in disc couplings can lead to several challenges, but these issues can be effectively addressed using appropriate measures:

  • Reduced Efficiency: Misalignment can cause increased friction and wear, leading to energy losses and reduced coupling efficiency. Regular maintenance and proper alignment can help mitigate this issue.
  • Vibration and Noise: Misalignment often results in vibrations and noise in the machinery. This can impact the overall performance of the system and cause discomfort to operators. Ensuring precise alignment and using vibration-damping solutions can minimize these effects.
  • Premature Wear: Disc couplings experiencing misalignment may wear out prematurely due to uneven loading and stress concentrations. Optimal alignment and using coupling models designed to handle misalignment can extend the coupling’s lifespan.
  • Imbalanced Loads: Misalignment can lead to imbalanced loads on the coupling discs, causing uneven stress distribution. This can lead to fatigue and failure. Using spacer elements between the discs and proper alignment can distribute the loads more evenly.
  • Reduced Accuracy: In applications requiring precision positioning, misaligned disc couplings can result in inaccurate measurements or positioning. Implementing accurate alignment practices and selecting couplings designed for precise applications can mitigate this challenge.
  • Temperature Rise: Misalignment-induced friction generates heat, leading to temperature rise in the coupling and adjacent components. This can potentially affect the material properties and lead to premature wear. Proper alignment and selecting appropriate lubrication can manage temperature rise.

Addressing misalignment challenges involves a combination of careful installation, routine maintenance, alignment checks, and using coupling designs that offer flexibility and resilience to misalignment. Regular monitoring and addressing misalignment issues promptly can help ensure the longevity and optimal performance of disc couplings.

China best FM Approved Different Types Stainless Steel Flexible Disc Coupling  China best FM Approved Different Types Stainless Steel Flexible Disc Coupling
editor by CX 2024-02-25

China factory Gear Flexible Coupling 1613982300 Design for CHINAMFG Air Compressor

Product Description

Product Description

Gear Flex Coupling Element Kit 295711501/16139823/1613982300

Type: Gear Flex Coupling

Applied: Atlas Copco

Certificate: iso 9001.

 

Coupling Selection Method

  • Torque – power [kW] • Speed [r/min]
  • Type of equipment and application
  • Shaft diameters
  • Shaft gaps
  • Physical space limitation
  • Special bore or finish information

Coupling Features

  • Good starting performance can change the load starting of the motor to no-load starting, so as to realize the soft starting of the working machine, reduce the current during starting and reduce the starting energy consumption.
  • Save electric energy and equipment cost, which can solve the unreasonable situation of the big horse-drawn trolley with load starting machine, save the motor capacity, improve the power factor and motor efficiency of the grid, reduce reactive power loss, save electric energy, and simplify the motor starting equipment and reduce equipment cost.
  • The transferred torque can be adjusted, easy to achieve overload protection.When the working machine is overloaded or jammed, the steel ball type safety coupling will slip automatically, which can prevent the motor from burning out and other parts damage.
  • Except for the starting and braking stages, the main and driven parts of the steel ball safety coupling have no speed difference, no friction loss and high transmission efficiency.
  • Nonmetallic elastic elements are adopted in the steel ball type safety coupling, which can compensate the offset of the linked 2 axes within a certain range, with a small amount of buffering and damping.
  • Reliable operation, stable performance, convenient installation, disassembly and maintenance.

 

Detailed Photos

 

Determining the right type of flexible coupling starts with the following analysis of the application:

  • Prime mover type (motor, diesel engine, etc.) of the drive side of the system
  • Actual horsepower and/or torque requirements, not prime motor-rated horsepower (note the range of variable torque caused by periodic or unstable loads, worst-case starting loads,
  • Drive system inertia related to prime mover inertia (data available from equipment supplier)
  • vibration, linear and torsional vibration (experienced supplier or consultant can help you evaluate vibration) shaft-to-shaft deviation;
  • Note the degree of Angle offset (axis is not parallel) and parallel offset (distance between axis centers when axes are parallel but not aligned);
  • Also note whether the drive/driven units share the same floor axial (inside/outside) axial motion,
  • whether they share distance (the distance between the drive end and the driven axis), and any other space-related restrictions.

 

We are able to offer a wide range of special couplings, which are based on your samples or drawings.

Due to the refinement of production operations and the high-end technology, we have been able to produce high-quality Rubber Coupling, Trolley Wheel, Flexible Coupling, Flexible Rubber Coupling, Industrial Rubber Coupling, Star Coupling, CHINAMFG type Coupling Spare and other products, widely used in industrial applications.

 

All these products are tested and checked against the set quality parameters before being sent to the customer. This shows that we are willing to provide our customers with updated and perfect product lines to meet their different needs. In addition, we also provide customized solutions to provide customers with a wide range of space, so that they can choose their favorite products according to their needs and requirements.
 

More Products for Choose

Coupling Coupling
1613949900 1613982300
1614873800 1613958500
165710800 165710800
162357100 1619646700
1615678500 165714700
1615682500 1604076100
1613982300 1626510900

Tips:
 
This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.
 

 

Company Profile

       Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment. Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.

Company team

Our company is located in the beautiful coastal city of HangZhou,is a professional manufacturer of air compressor filters and separators,

We repect the enterprise spirit of “steadyfastness,hard work and responsibility” and creat a good corporate environment based on the operation principle of “Integrity,reliability and innovation”.

 

 

With the survival idea of “perfect technology, good service and excellent quality”,
We always adhere to customer first,
aim at serving customer sincerely and touching customer with our service.

We plunge ourselves to provide clear and sustainable comprssed air to our customer,
meanwhile constantly pursue to save the sunning cost of compressor system for them.
Profession, concentration, focus is our corporate philosophy.

 

Packaging & Shipping

 

 

FAQ

 Q1. What is your product range?

A: Our products cover replacement hydraulic filter, Air compressor filters, Compressed air filter element, Heavy truck insert filters, Vacuum pump filters, and Some spare parts for compressors.

Q2. Is customized filter or OEM available? 
A: Yes, just offer your required specifications and drawings.

Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build new molds, but open new mold fee charged, when you place bulk order, the mold fee can return back.

Q4. What’s your terms of packing?
A: Generally, we pack our goods in neutral boxes,outside brown carton cases. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q5. What’s the terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balancing.

Q6. What’s your terms of delivery?
A: (1)FOB (2)CFR (3)CIF.

Q7. How about your delivery time?
A: Generally, under MOQ quantity take 5-7 working days after receiving your advance payment. The specific delivery time depends on models and the quantity of your order.

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

elastomeric coupling

Design Considerations for Enhancing Elastomeric Coupling Durability

Elastomeric couplings can be designed to enhance their durability and performance in various mechanical power transmission applications. Here are some key design considerations:

1. Material Selection:

Choosing the appropriate elastomeric material based on the specific application requirements is critical for ensuring durability. Factors such as temperature range, chemical exposure, load capacity, and resistance to wear and tear should guide the material selection process.

2. Torque and Load Ratings:

The coupling’s design should consider the expected torque and load requirements of the application. Ensuring that the coupling’s torque and load ratings are well-matched to the operating conditions helps prevent premature failure due to overloading.

3. Misalignment Compensation:

Elastomeric couplings are known for their ability to accommodate misalignment between shafts. Properly designing the coupling to handle the anticipated misalignment angles and offset distances will prevent excessive stress on the elastomer and increase its longevity.

4. Damping and Vibration Control:

Integrating features to enhance the coupling’s damping capabilities can help reduce vibrations and dampen shocks and impacts. This reduces the overall stress on the coupling and connected equipment, contributing to improved durability.

5. Torsional Flexibility:

Providing adequate torsional flexibility in the coupling design allows it to absorb sudden torque spikes and fluctuations, preventing potential damage to the machinery and enhancing durability.

6. Corrosion Resistance:

In environments where corrosion or chemical exposure is a concern, incorporating corrosion-resistant materials or protective coatings in the coupling design can extend its service life.

7. Lubrication and Maintenance:

Some elastomeric couplings may require periodic lubrication to minimize friction and wear. Designing the coupling to facilitate easy maintenance can ensure it remains in optimal condition throughout its operational life.

8. Finite Element Analysis (FEA):

Using FEA during the design phase allows engineers to simulate real-world operating conditions and identify potential stress concentrations. This enables the optimization of the coupling’s shape and material distribution for enhanced durability.

By carefully considering these design aspects, engineers can create robust and durable elastomeric couplings that provide reliable performance and contribute to the overall efficiency and longevity of the mechanical systems they serve.

elastomeric coupling

Reducing Vibrations and Noise with Elastomeric Couplings

Elastomeric couplings are designed with inherent damping properties that enable them to effectively reduce vibrations and noise in rotating machinery. Here’s how elastomeric couplings achieve this:

1. Vibration Absorption:

Elastomeric materials have the ability to absorb and dissipate vibrational energy. When a rotating machinery system experiences torsional vibrations, the elastomeric coupling’s flexible element absorbs these vibrations, preventing them from propagating through the system. This dampening effect helps to minimize the transmission of vibrations to the connected equipment, reducing wear and fatigue on components.

2. Shock Load Reduction:

Elastomeric couplings can also absorb shock loads that occur during sudden starts and stops. When the machinery experiences abrupt changes in torque, the elastomeric material cushions the impact, protecting the machinery from potentially harmful shock loads.

3. Misalignment Compensation:

Machinery misalignment can lead to vibrations, noise, and premature wear. Elastomeric couplings are designed to accommodate various types of misalignment, including angular, parallel, and axial misalignments. By flexing and compensating for misalignment, the coupling reduces stress on the connected machinery, further minimizing vibrations.

4. Damping of Resonance:

Resonance is a phenomenon where the natural frequency of the rotating machinery coincides with an external force, leading to amplified vibrations. Elastomeric couplings help dampen resonance by absorbing and dissipating the energy, preventing resonance-related issues and reducing noise.

5. Electrical Isolation:

Elastomeric couplings made from electrically insulating materials provide electrical isolation between connected shafts. This isolation prevents the transmission of electrical currents or interference between the machinery components, which can contribute to noise and signal disturbances.

By effectively reducing vibrations and noise, elastomeric couplings contribute to smoother and quieter operation of rotating machinery. This leads to benefits such as improved equipment reliability, reduced maintenance costs, and increased operator comfort in industrial settings.

However, it is important to select the appropriate elastomeric coupling based on the specific requirements of the machinery and application. Factors such as torque, speed, misalignment, and environmental conditions must be considered to ensure that the coupling can effectively mitigate vibrations and noise while providing reliable power transmission.

elastomeric coupling

What is Elastomeric Coupling and How Does It Work in Mechanical Systems?

An elastomeric coupling is a type of flexible shaft coupling that uses an elastomeric material, typically rubber or polyurethane, to connect two shafts and transmit torque between them. The primary purpose of elastomeric couplings is to compensate for misalignments between the shafts while dampening vibrations and shocks in mechanical systems.

Construction and Working Principle:

Most elastomeric couplings consist of two hubs with a flexible element in between. The flexible element is made of high-quality elastomeric material, which is molded or bonded to the hubs. The elastomeric material is designed to be both torsionally flexible and durable.

When torque is applied to one shaft, the flexible element deforms and absorbs the misalignment between the shafts, allowing the coupling to compensate for angular, parallel, and axial misalignments. This flexibility is crucial for preventing undue stress on the connected equipment and increasing the coupling’s lifespan.

Key Features and Advantages:

1. Misalignment Compensation: Elastomeric couplings can handle small degrees of misalignment, making them suitable for applications where precise alignment is challenging or subject to change over time.

2. Vibration Dampening: The elastomeric material absorbs vibrations and shocks, resulting in reduced noise and improved smoothness of operation.

3. Fail-Safe Design: Elastomeric couplings have a fail-safe design, where if the elastomeric element were to fail, the coupling could still transmit torque without completely breaking down.

4. Simple and Economical: Elastomeric couplings are relatively simple in design, easy to install, and cost-effective compared to some other coupling types.

5. Maintenance-Free: In general, elastomeric couplings require minimal maintenance, making them a popular choice in various industries.

Applications:

Elastomeric couplings find applications in a wide range of industries and mechanical systems, including:

  • Pumps and compressors
  • Conveyor systems
  • Machine tools
  • Material handling equipment
  • Blowers and fans
  • General power transmission systems

Overall, elastomeric couplings are valued for their flexibility, shock absorption, and misalignment compensation capabilities, making them a reliable choice for transmitting torque while protecting connected equipment from harmful effects of misalignments and vibrations.

China factory Gear Flexible Coupling 1613982300 Design for CHINAMFG Air Compressor  China factory Gear Flexible Coupling 1613982300 Design for CHINAMFG Air Compressor
editor by CX 2024-02-25

China Professional Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Flexible Gear Coupling gear coupling

Product Description

Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric flexible gear Coupling

Application of Shaft Chain Coupling

A shaft chain coupling is a type of coupling that is used to connect 2 shafts that are not perfectly aligned. The coupling consists of a chain that is connected to 2 sprockets, 1 on each shaft. The chain allows the shafts to move slightly relative to each other, which helps to compensate for misalignment.

Shaft chain couplings are used in a wide variety of applications, including:

  • Conveyors: Shaft chain couplings are used in conveyors to transmit power from the motor to the conveyor belt.
  • Pumps: Shaft chain couplings are used in pumps to transmit power from the motor to the pump shaft.
  • Fans: Shaft chain couplings are used in fans to transmit power from the motor to the fan shaft.
  • Generators: Shaft chain couplings are used in generators to transmit power from the turbine to the generator rotor.
  • Wind turbines: Shaft chain couplings are used in wind turbines to transmit power from the turbine to the generator rotor.

Shaft chain couplings are a versatile and reliable type of coupling that can be used in a wide variety of applications. They offer a number of advantages over other types of couplings, including:

  • Can compensate for misalignment: Shaft chain couplings can compensate for misalignment up to 2 degrees. This makes them ideal for applications where the shafts are not perfectly aligned, such as when the equipment is installed in a new location or when the equipment is subject to vibration.
  • Easy to install: Shaft chain couplings are easy to install and maintain. They can be installed without special tools or training.
  • Available in a variety of sizes and styles: Shaft chain couplings are available in a variety of sizes and styles to meet the needs of different applications. This makes it easy to find a coupling that is the right size and style for your application.
  • Highly efficient: Shaft chain couplings are highly efficient, meaning that they transmit a large percentage of the power from the driving shaft to the driven shaft. This can save money on energy costs.
  • Durable: Shaft chain couplings are durable and can withstand a wide range of operating conditions.

Here are some of the disadvantages of using shaft chain couplings:

  • Cost: Shaft chain couplings can be more expensive than other types of couplings.
  • Maintenance: Shaft chain couplings require periodic maintenance, such as checking the coupling for wear and tear and lubricating the chain as needed.

Overall, shaft chain couplings are a versatile and reliable type of coupling that can be used in a wide variety of applications. They offer a number of advantages over other types of couplings, but they also have some disadvantages. The best type of coupling for a particular application will depend on the specific requirements of that application.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flange coupling

What Is a Gear Coupling and How Does It Work?

A gear coupling is a type of mechanical coupling that connects two shafts together to transmit torque and rotational motion between them. It consists of two gear-like hubs with external teeth that mesh together and transmit torque via the engagement of the teeth. The gear teeth on the hubs allow for high torque transmission and provide flexibility to accommodate misalignments between the shafts.

The working principle of a gear coupling can be summarized as follows:

1. Gear Hubs: A gear coupling consists of two hubs, each attached to the respective shafts that need to be connected. The hubs have external gear teeth that mesh together when the coupling is assembled.

2. Gear Teeth Engagement: When the two gear hubs are brought together during installation, the gear teeth on one hub mesh with the corresponding teeth on the other hub. This meshing creates a strong mechanical connection between the two shafts.

3. Torque Transmission: As the connected shafts rotate, the gear teeth engage and transmit torque from one shaft to the other. The gear coupling can handle high torque loads, making it suitable for heavy-duty applications.

4. Misalignment Compensation: One of the key advantages of a gear coupling is its ability to accommodate various types of misalignment, including angular, parallel, and axial misalignments between the connected shafts. This misalignment compensation helps reduce stress on the connected equipment and prevents premature wear.

5. Lubrication: Gear couplings may require lubrication to reduce friction between the gear teeth and ensure smooth operation. Proper lubrication helps improve the efficiency and longevity of the coupling.

Gear couplings are commonly used in various industrial applications, such as power generation, steel mills, mining, and heavy machinery. They offer high torque capacity, excellent misalignment accommodation, and reliability, making them a preferred choice for transmitting power in demanding environments.

China Professional Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Flexible Gear Coupling  gear couplingChina Professional Drive Pipe Spline Shaft Disc Flange Gear Rubber Jaw Motor Spacer Beam Rigid Fluid Chain Nm Mh HRC Pin Fenaflex Spacer Elastomeric Flexible Gear Coupling  gear coupling
editor by CX 2024-02-25

China high quality Ductile Iron Grooved Pipe Fitting Flexible and Rigid Couplings for Fire Fighting Epoxy Coat

Product Description

Product parameters

Product Name Ductile Iron Grooved Couplings and Fittings
HS Code 735710000
Size Nominal Size:25~300mm 
Pipe O.D:33.7~323.9mm 
Length:57~230m
Type Water System-Grooved Pipe Fitting
Parameter Shape:U-Bolted Mechanical Tee
Material:ASTM A536 
Rubber Gasket: ASTM D2000
Bolt and Bolt and Nut: ASTM A183
Testing Method: UL FM Vds LPCB
Certification FM,UL BSI,ANSI,ISO9001, 3C

Products

Application

Production display

Our company

HangZhou CHINAMFG Industries Co., Ltd is specialized in manufacturing agricultural processing machinery. At the establishment beginning, we only exported pipe fittings as a trader, with the business development, some related products from our cooperated suppliers were also exported by us, and we also have stocks in these factories. Our company business scope have been involved pipe fittings, Agricultural machinery & parts. Our Disk Mill, Flour Mill, Rice Mill, Oil Expeller and Meat Mincer could be process Corn, Wheat, Paddy, Soybean, Peanut and other grains. Our machines are sold into India, Egypt, Sudan, Kenya, Morocco, Australia and USA etc. We still keep the quality is the life, Innovation for development, from the wonderful appearance to inner structure, from best package to safety delivery, each action are our best service for the customers.
Our trademarks are “SMECH”, “SENCHE” “DRAGONSATR” & “NASTAR”, we also could make OEM under customer’s requirement.
We also registered a international offshore company “SENSI INDUSTRIES LIMITED” for management some import & export business.
We are willing to build trusty business relationship and friendship with you.
Factory Tour

Packaging & transportation

FAQ:
Q1: Are you trading company or manufacturer?

We, HangZhou CHINAMFG Industries Co., Ltd, is a combination of production and trade, industry integration business.

Q2: Is the price of your products lower than others?
We can not promise you the lowest price, because the best quality is what we pursue firstly.
 
Q3: What’s your payment terms?
We recommend our customer different terms of payment based on different order amount. Paypal, Western Union, T/T, LC are all acceptable.

Q4: Can you provide us with some samples for testing?
A: Of course, we can offer you samples. You only need to bear the freight and samples’ charge can be negotiated.

Q5: How about your service?
A: We have pre-sale service, in-sale service and after-sale service. As “Customer First” is the most important principle of company operation.

If any problems not in the above-mentioned answers, you can contact us directly. We will help you to solve the problem with carefulness and patience. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

rigid coupling

What Are the Maintenance Requirements for Rigid Couplings?

Rigid couplings are known for their simplicity and low maintenance requirements. Since they do not have moving parts or flexible elements, there are minimal wear and tear issues. However, some maintenance considerations for rigid couplings include:

1. Regular Inspection: It is essential to perform periodic inspections of the rigid couplings to check for any signs of wear, damage, or misalignment. Regular inspections can help identify potential issues early and prevent further problems.

2. Shaft Alignment: Proper shaft alignment is critical for rigid couplings. During installation or whenever maintenance work is performed on the connected machinery, the shaft alignment must be checked and adjusted if necessary. Misalignment can lead to premature coupling failure and cause additional stress on connected equipment.

3. Lubrication: Most rigid couplings do not require lubrication since they have no moving parts. However, some special designs or large-sized couplings may have set screws or other fasteners that require lubrication. It is essential to follow the manufacturer’s guidelines regarding lubrication, if applicable.

4. Corrosion Protection: In corrosive environments, protecting the rigid couplings from corrosion is crucial. This can be achieved through the use of corrosion-resistant materials or coatings.

5. Periodic Re-tightening: If the rigid coupling uses set screws or other fasteners, periodic re-tightening may be necessary to maintain the integrity of the connection. This is particularly important in applications with high vibrations or heavy loads.

6. Temperature Considerations: Rigid couplings may experience thermal expansion or contraction, especially in high-temperature environments. It is essential to consider the thermal expansion characteristics of the coupling material and the connected shafts to ensure proper functioning under varying temperatures.

7. Professional Maintenance: In complex systems or critical applications, it is advisable to seek professional maintenance and alignment services. Expert technicians can ensure proper installation, alignment, and maintenance of rigid couplings, reducing the risk of unexpected failures.

Overall, rigid couplings are designed for reliability and longevity, and proper maintenance practices can further enhance their performance and lifespan. Regular inspections and alignment checks are vital for identifying and addressing potential issues before they escalate into costly problems.

rigid coupling

Can Rigid Couplings Be Used in Applications with Varying Operating Temperatures?

Rigid couplings are versatile mechanical components that can be used in a wide range of applications, including those with varying operating temperatures. However, the selection of the appropriate material for the rigid coupling is crucial to ensure its reliable performance under different temperature conditions.

Material Selection: The choice of material for the rigid coupling depends on the specific operating temperature range of the application. Common materials used in manufacturing rigid couplings include steel, stainless steel, and aluminum, among others. Each material has its own temperature limitations:

Steel: Rigid couplings made from steel are suitable for applications with moderate to high temperatures. Steel couplings can handle temperatures ranging from -40°C to around 300°C, depending on the specific grade of steel used.

Stainless Steel: Stainless steel rigid couplings offer higher corrosion resistance and can be used in applications with more demanding temperature environments. They can withstand temperatures from -80°C to approximately 400°C.

Aluminum: Aluminum rigid couplings are commonly used in applications with lower temperature requirements, typically ranging from -50°C to around 120°C.

Thermal Expansion: When selecting a rigid coupling for an application with varying temperatures, it is essential to consider thermal expansion. Different materials have different coefficients of thermal expansion, meaning they expand and contract at different rates as the temperature changes. If the operating temperature fluctuates significantly, the thermal expansion of the rigid coupling and the connected components must be carefully accounted for to avoid issues with misalignment or binding.

Extreme Temperature Environments: For applications with extremely high or low temperatures beyond the capabilities of traditional materials, specialized high-temperature alloys or composites may be required. These materials can withstand more extreme temperature conditions but may come with higher costs.

Lubrication: The choice of lubrication can also play a role in the suitability of rigid couplings for varying temperature applications. In high-temperature environments, consideration should be given to using high-temperature lubricants that can maintain their effectiveness and viscosity at elevated temperatures.

In conclusion, rigid couplings can indeed be used in applications with varying operating temperatures, but careful material selection, consideration of thermal expansion, and appropriate lubrication are essential to ensure reliable and efficient performance under changing temperature conditions.

rigid coupling

Advantages of Using Rigid Couplings in Mechanical Systems:

Rigid couplings offer several advantages when used in mechanical systems. These advantages make them a preferred choice in certain applications where precise alignment and high torque transmission are essential. Here are the key advantages of using rigid couplings:

  • 1. High Torque Transmission: Rigid couplings are designed to handle high torque and power transmission without any loss due to flexibility. They provide a direct and solid connection between shafts, allowing for efficient transfer of rotational motion.
  • 2. Precise Alignment: Rigid couplings maintain precise alignment between connected shafts. When installed correctly, they ensure that the two shafts are perfectly aligned, which is crucial for applications where accurate positioning and synchronization are required.
  • 3. Synchronous Rotation: The rigid connection provided by these couplings enables synchronous rotation of the connected shafts. This is particularly important in applications where components must move in precise coordination with each other.
  • 4. Simple Design: Rigid couplings have a straightforward design with minimal moving parts. This simplicity makes them easy to install and maintain, reducing the chances of mechanical failure.
  • 5. Cost-Effective: Compared to some other coupling types, rigid couplings are generally more cost-effective. Their simple design and robust construction contribute to their affordability.
  • 6. High Strength and Durability: Rigid couplings are typically made from strong and durable materials such as steel, stainless steel, or aluminum. These materials can withstand heavy loads and provide long-lasting performance in demanding applications.

Rigid couplings are commonly used in various industries and applications, including high-precision machinery, robotics, automation systems, precision motion control, and machine tools. They are especially beneficial in scenarios where misalignment needs to be minimized or avoided altogether.

It’s important to note that while rigid couplings offer these advantages, they are not suitable for applications where shaft misalignment or shock absorption is required. In such cases, flexible couplings or other specialized coupling types may be more appropriate.

China high quality Ductile Iron Grooved Pipe Fitting Flexible and Rigid Couplings for Fire Fighting Epoxy Coat  China high quality Ductile Iron Grooved Pipe Fitting Flexible and Rigid Couplings for Fire Fighting Epoxy Coat
editor by CX 2024-02-25

China Professional Cam&Groove Coupling PP Plastic Nylon Fitting Fluid Safety Transfer Camlock Coupling

Product Description

cam&groove coupling PP plastic nylon fitting fluid safety transfer camlock coupling 

Polypropylene cam and groove Coupling are made according to standard A-A-59326(original standard Mil-C-27487), size from 1/2″ to 4″. Black Polypropylene Camlock fitting s are made from polypropylene reinforced with 25%-30%acid-resistant fibreglass.It has excellent tolerance to most corrosive acids, bases, fertilizers, solvents and wastewater, so it is widely used in inhalation / discharge hoses for agricultural or industrial applications.

body materials: Polypropylene
handle: stainless steel
Gaskets:Buna-N (NBR), EPDM
The thread of camlock fittings are BSP,BSPT,NPT
SIZE:1/2″to 4″
pressure :50-100 Psi( depending on size and temperature)
Operating temperature :-30-70°C (160°F)
When the temperature rises, the working pressure drops
Manufacture method:Injection molding
The use and connection way of cam and groove couplings: Type A camlock can usually be used with type D, type C, type B, type DC (Dust Cap) of the same size. To make a connection, simply slide the camlock adapter into the camlock coupling and with normal hand pressure, press the cam levers down.

Demension of PP camlock coupling 
 

                  size              Working Pressure
1/2″ – 2-1/2″ 100 Psi
3″ – 4″ 50 Psi

Feature:
lightweight, convenient
economy is cheap
good chemical resistance
disconnect/connect without tools

Camlock fitting industry applications:
industries: chemical, paint, agriculture, municipal, sewage
applications: chemicals, solvents, varnishes, inks, fertilizers, wastewater

Our Advantage

We are experienced as we have been in this industry as a manufacturer for more than 10 years. Both of quality and service are highly guaranteed. Absolutely prompt delivery. We can produce according to specific drawings from customers. Welcome OEM/ODM project. Strict control on quality. High efficient and well trained sale service team.  ISO9001, CE and SGS certified.

FAQ

1.Q: Are you a producer or trading company?
A: We are an experienced manufacturer. We own production line and kinds of machines.  

2. Can you make our specific logo on the part?
Yes please provide me your logo and we will make your logo on the part.

3. Can you manufacture products according to my drawings?
Yes we can manufacturer according to client’s drawings if drawings or samples are available. We are experienced enough to make new tools.

4. Q: Can I get some samples?
A: We are honored to offer you our samples. Normally it is for free like 3-5 pcs. It is charged if the samples are more than 5 pcs. Clients bear the freight cost.

5. Q: How many days do you need to finish an order?
A: Normally it takes about 30 days to finish the order. It takes more time around CHINAMFG season, or if the order involves many kinds of different products.  

6. what kind of rubber washer do you apply to camlock couplings?
Normally we use NBR gasket.

company-Union-Metal-Products-HangZhou-Co-Ltd-.html /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

fluid coupling

Role of Fluid Couplings in Heavy-Duty Mining Equipment

Fluid couplings play a critical role in heavy-duty mining equipment, offering several advantages that enhance the performance, safety, and longevity of the machinery:

  • Soft Start: In mining applications, where large equipment like crushers, conveyors, and draglines are involved, fluid couplings provide a soft start to the motor, gradually ramping up the torque and reducing the shock and stress on the drivetrain. This ensures smoother equipment startup and prevents sudden power demand spikes.
  • Torque Limiting: Fluid couplings act as torque limiters, protecting the equipment from sudden overloads and torque surges during operations. This feature prevents damage to the motor, gearbox, and driven components, thus increasing the reliability and lifespan of the equipment.
  • Load Distribution: In mining equipment with multiple driven components or motors, fluid couplings enable efficient load distribution among the components. This ensures that each component shares the load appropriately, preventing uneven wear and improving overall system efficiency.
  • Overload Protection: The inherent slip feature of fluid couplings allows them to slip at high loads, providing overload protection to the equipment. In case of unexpected jams or blockages in conveyor belts or crushers, the fluid coupling can slip, preventing costly damage to the equipment.
  • Vibration Damping: Mining operations can generate significant vibrations that can be damaging to the equipment. Fluid couplings help dampen vibrations, reducing stress on the components and minimizing wear and tear.
  • Reduced Maintenance: By preventing sudden torque surges and overloads, fluid couplings reduce the need for frequent maintenance and repairs, saving both time and money for mining operators.

Heavy-duty mining equipment operates in harsh and challenging environments with high loads and abrasive materials. Fluid couplings used in mining applications are designed to be robust, durable, and resistant to contaminants like dust and water.

Overall, fluid couplings play a vital role in ensuring the efficient and reliable operation of heavy-duty mining equipment, contributing to increased productivity and reduced downtime in mining operations.

fluid coupling

Fluid Coupling: Dealing with Oil Leakage and Sealing Issues

Fluid couplings are designed to be sealed units to prevent the leakage of the internal fluid (usually oil or a similar hydraulic fluid). Proper sealing is crucial for the efficient and reliable operation of the fluid coupling, as any oil leakage can lead to reduced performance, contamination, and potential damage to the surrounding components.

Here are some key factors related to oil leakage and sealing issues in fluid couplings:

  • Seal Design: The sealing system in a fluid coupling typically involves shaft seals and gaskets. High-quality seals are essential to prevent oil from escaping and contaminants from entering the coupling. The design and material selection of these seals play a significant role in maintaining effective sealing.
  • Installation: Proper installation of the fluid coupling is critical to ensure that the seals are correctly positioned and securely fitted. Any misalignment or damage during installation can lead to oil leakage issues.
  • Maintenance: Regular maintenance is essential to detect and address any potential sealing problems early on. Inspections should be conducted periodically to check for signs of oil leakage, wear on the seals, and any damage to the coupling housing.
  • Fluid Selection: The choice of fluid used inside the coupling can also influence its sealing performance. Using the recommended fluid type and quality specified by the manufacturer is essential for maintaining proper sealing.
  • Operating Conditions: The operating environment can impact the sealing effectiveness. Extreme temperature variations or harsh working conditions may affect the integrity of the seals over time.

If oil leakage or sealing issues are observed in a fluid coupling, immediate action should be taken to address the problem. This may involve replacing worn-out seals, resealing the coupling, or investigating potential causes such as misalignment or excessive heat generation.

Additionally, regular inspection and maintenance of the fluid coupling can help prevent sealing problems before they escalate. Early detection and appropriate maintenance can extend the lifespan of the fluid coupling and ensure reliable power transmission in various industrial applications.

Consulting with the manufacturer or a qualified engineer for guidance on proper maintenance and troubleshooting of fluid coupling sealing issues is recommended.

fluid coupling

Disadvantages and Limitations of Fluid Couplings

While fluid couplings offer numerous advantages, they also have some disadvantages and limitations that should be considered for specific applications:

  • Power Loss: Fluid couplings introduce a power loss due to the slip that occurs during power transmission. This power loss can reduce the overall efficiency of the system, especially in applications with high-speed variations.
  • Torque Multiplication: Unlike torque converters, fluid couplings have limited torque multiplication capabilities. They do not provide as much torque increase at low speeds, which may be necessary for certain heavy-load applications.
  • Temperature Sensitivity: Fluid couplings are sensitive to temperature changes. In extremely hot or cold conditions, the viscosity of the fluid may vary, affecting the coupling’s performance.
  • Fluid Contamination: Contaminants in the fluid can adversely affect the performance and lifespan of the fluid coupling. Regular maintenance and monitoring of the fluid quality are essential to prevent potential issues.
  • Speed Limitations: Fluid couplings may have speed limitations in certain applications. High-speed operations can lead to centrifugal forces that may affect the coupling’s behavior.
  • Complexity in Control: In some cases, controlling the output speed of the fluid coupling can be more challenging compared to other types of couplings. This complexity may require additional control mechanisms.
  • Cost: Fluid couplings can be more expensive than some mechanical couplings, such as belt and chain drives. The initial cost and ongoing maintenance expenses should be considered in the selection process.

Despite these limitations, fluid couplings remain a popular choice in many industrial applications, thanks to their smooth power transmission, overload protection, and torsional vibration damping capabilities. The decision to use a fluid coupling should be based on a thorough understanding of the specific requirements and operating conditions of the machinery or equipment.

China Professional Cam&Groove Coupling PP Plastic Nylon Fitting Fluid Safety Transfer Camlock Coupling  China Professional Cam&Groove Coupling PP Plastic Nylon Fitting Fluid Safety Transfer Camlock Coupling
editor by CX 2024-02-25

China OEM Aluminum Alloy 19 26 34 39 44 56 68 82 Flexible Double Diaphragms Clamp Disc Coupling

Product Description

Product Description

Product name

Chain coupling

Material

Carbon steel material

Structure

Roller chain+sprocket+cover

Size

KC3012, KC4012, KC4014, KC4016, KC5014, KC5016, KC5018, KC6018, KC6571, KC6571, KC8018, KC8571, KC8571, KC1571,

KC12018, KC12571, KC16018, KC16571, KC20018, KC20571, KC24026

Other type

Flexible coupling: parallel coupling; jaw coupling; single diaphragm step coupling; double diaphragms coupling; high rigidity coupling; 8 fonts cupling

Application

Shaft transmission

Feature

High performance, light weight, convenient assembly

 

Packaging & Shipping

Company Profile

 

ZheJiang Haorongshengye Electrical Equipment Co., Ltd.

1. Was founded in 2008
2. Our Principle:

“Credibility Supremacy, and Customer First”
3. Our Promise:

“High quality products, and Excellent Service”
4. Our Value:

“Being Honesty, Doing the Best, and Long-lasting Development”
5. Our Aim:

“Develop to be a leader in the power transmission parts industry in the world”
 

6.Our services:

1).Competitive price

2).High quality products

3).OEM service or can customized according to your drawings

4).Reply your inquiry in 24 hours

5).Professional technical team 24 hours online service

6).Provide sample service

Main products

Machines

 

Exbihition

 

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

disc coupling

Handling Torque and Torsional Stiffness in Disc Couplings

Disc couplings are engineered to handle high levels of torque and provide excellent torsional stiffness. The design of disc couplings allows them to transmit torque efficiently while maintaining their torsional rigidity. The flexible discs are designed to absorb misalignments and compensate for slight angular, axial, and radial deviations.

The discs themselves are precision-made with carefully calculated geometry, ensuring that they can transmit torque smoothly and evenly across their surface. The arrangement of multiple discs in a stack contributes to the coupling’s ability to accommodate high torque loads without sacrificing torsional stiffness.

Due to their torsionally stiff construction, disc couplings are capable of maintaining accurate shaft alignment even under significant torque transmission. This makes them suitable for applications requiring precise positioning, consistent torque transfer, and minimal backlash.

disc coupling

Recent Advancements in Disc Coupling Design

Disc coupling technology has seen continuous advancements to enhance performance, reliability, and adaptability to various applications. Some recent innovations in disc coupling design include:

  • Material Enhancements: The development of new materials, such as advanced alloys and composite materials, has improved coupling durability, corrosion resistance, and overall lifespan.
  • Flexible Disc Profiles: Innovative disc profiles are designed to optimize flexibility while maintaining torque transmission capabilities, allowing for better misalignment compensation and shock absorption.
  • Modular Designs: Modular disc coupling systems offer flexibility in adapting to different torque and misalignment requirements, making them versatile for a wide range of applications.
  • Enhanced Torsional Stiffness: Some designs focus on achieving higher torsional stiffness, ensuring accurate torque transmission and responsiveness even in demanding conditions.
  • Smart Couplings: Integration of sensor technology enables real-time monitoring of coupling performance, allowing for predictive maintenance and reducing downtime.

These advancements are driven by the increasing demands of modern machinery and the need for higher efficiency, reduced maintenance, and improved overall system performance. Engineers and manufacturers are continually exploring new ways to optimize disc coupling design for a variety of industries and applications.

disc coupling

Disc Couplings: Function and Application in Mechanical Systems

A disc coupling is a type of flexible coupling used in mechanical systems to connect two shafts while allowing for angular misalignment, axial movement, and some degree of torsional flexibility. It consists of two hubs with flexible metallic discs, known as diaphragms, positioned between them.

Disc couplings are commonly utilized in various industrial applications where precise power transmission, reliability, and flexibility are essential. Some key features and applications of disc couplings include:

  • High Torque Transmission: Disc couplings are designed to transmit high torque loads between shafts while maintaining shaft alignment. The flexible diaphragms can accommodate misalignments and prevent torque overloads on connected equipment.
  • Angular Misalignment Compensation: The design of disc couplings allows them to handle angular misalignment between shafts, which can occur due to manufacturing tolerances or dynamic conditions.
  • Axial Movement Absorption: Disc couplings can absorb limited axial movement along the shaft axis without transferring excessive forces to the connected components.
  • Torsional Flexibility: The metallic diaphragms of disc couplings offer torsional flexibility, enabling them to dampen vibrations and shock loads. This helps protect connected equipment from damage and increases overall system reliability.
  • Precision Machinery: Disc couplings are often employed in precision machinery and equipment, such as CNC machines, robotics, pumps, compressors, and servo systems. These applications require accurate motion control and reliable power transmission.
  • High-Speed Applications: Due to their balanced design and ability to maintain precise alignment, disc couplings are suitable for high-speed applications where even a small misalignment can lead to vibration and wear.

The ability of disc couplings to provide both flexibility and precise torque transmission makes them a preferred choice in various industries, including manufacturing, aerospace, automotive, and more. Proper selection, installation, and maintenance of disc couplings contribute to improved machinery performance, reduced downtime, and extended component life.

China OEM Aluminum Alloy 19 26 34 39 44 56 68 82 Flexible Double Diaphragms Clamp Disc Coupling  China OEM Aluminum Alloy 19 26 34 39 44 56 68 82 Flexible Double Diaphragms Clamp Disc Coupling
editor by CX 2024-02-24