Tag Archives: air compressor supplier

China supplier Hot High Performance Gr48 Flex Coupling Element Kit for Screw Air Compressor Spare Parts Gr65 Gr38 Gr55 Gr28 Gr42 Gr75 Gr90 Coupling Rubber

Product Description

Hot High Performance Gr48 Flex Coupling Element Kit for Screw Air Compressor Spare Parts  GR65 GR38 GR55 GR28 GR42 GR75 GR90 Coupling Rubber

Product Description

 

Model number: GR65 GR38 GR55 GR28 GR42 GR75 GR90

Type: Gear Flex Coupling
 

Applied: Atlas Copco
 

Certificate: iso 9 replace by Coupling Element 16148738-670 applies to the screw air compressor GA 90-160,807,1410 New.

Coupling Features

  • Good starting performance can change the load starting of the motor to no-load starting, so as to realize the soft starting of the working machine, reduce the current during starting and reduce the starting energy consumption.
  • Save electric energy and equipment cost, which can solve the unreasonable situation of the big horse-drawn trolley with load starting machine, save the motor capacity, improve the power factor and motor efficiency of the grid, reduce reactive power loss, save electric energy, and simplify the motor starting equipment and reduce equipment cost.
  • The transferred torque can be adjusted, easy to achieve overload protection.When the working machine is overloaded or jammed, the steel ball type safety coupling will slip automatically, which can prevent the motor from burning out and other parts damage.
  • Except for the starting and braking stages, the main and driven parts of the steel ball safety coupling have no speed difference, no friction loss and high transmission efficiency.
  • Nonmetallic elastic elements are adopted in the steel ball type safety coupling, which can compensate the offset of the linked 2 axes within a certain range, with a small amount of buffering and damping.
  • Reliable operation, stable performance, convenient installation, disassembly and maintenance.

Determining the right type of flexible coupling starts with the following analysis of the application:

  • Prime mover type (motor, diesel engine, etc.) of the drive side of the system
  • Actual horsepower and/or torque requirements, not prime motor-rated horsepower (note the range of variable torque caused by periodic or unstable loads, worst-case starting loads,
  • Drive system inertia related to prime mover inertia (data available from equipment supplier)
  • vibration, linear and torsional vibration (experienced supplier or consultant can help you evaluate vibration) shaft-to-shaft deviation;
  • Note the degree of Angle offset (axis is not parallel) and parallel offset (distance between axis centers when axes are parallel but not aligned);
  • Also note whether the drive/driven units share the same floor axial (inside/outside) axial motion,
  • whether they share distance (the distance between the drive end and the driven axis), and any other space-related restrictions.

 

Detailed Photos

 

 

We are able to offer a wide range of special couplings, which are based on your samples or drawings.

Due to the refinement of production operations and the high-end technology, we have been able to produce high-quality Rubber Coupling, Trolley Wheel, Flexible Coupling, Flexible Rubber Coupling, Industrial Rubber Coupling, Star Coupling, CHINAMFG type Coupling Spare and other products, widely used in industrial applications.

 

All these products are tested and checked against the set quality parameters before being sent to the customer. This shows that we are willing to provide our customers with updated and perfect product lines to meet their different needs. In addition, we also provide customized solutions to provide customers with a wide range of space, so that they can choose their favorite products according to their needs and requirements.
 

More Products for Choose

Coupling Coupling
1613949900 1613982300
1614873800 1613958500
165710800 165710800
162357100 1619646700
1615678500 165714700
1615682500 1604076100
1613982300 1626510900

Tips:
 
This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.

 

Company Profile

       Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment. Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.

Company team

Our company is located in the beautiful coastal city of HangZhou,is a professional manufacturer of air compressor filters and separators,

We repect the enterprise spirit of “steadyfastness,hard work and responsibility” and creat a good corporate environment based on the operation principle of “Integrity,reliability and innovation”.

 

 

With the survival idea of “perfect technology, good service and excellent quality”,
We always adhere to customer first,
aim at serving customer sincerely and touching customer with our service.

We plunge ourselves to provide clear and sustainable comprssed air to our customer,
meanwhile constantly pursue to save the sunning cost of compressor system for them.
Profession, concentration, focus is our corporate philosophy.

 

 

FAQ

 Q1. What is your product range?
A: Our products cover replacement hydraulic filter, Air compressor filters, Compressed air filter element, Heavy truck insert filters, Vacuum pump filters, and Some spare parts for compressors.

Q2. Is customized filter or OEM available? 
A: Yes, just offer your required specifications and drawings.

Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build new molds, but open new mold fee charged, when you place bulk order, the mold fee can return back.

Q4. What’s your terms of packing?
A: Generally, we pack our goods in neutral boxes,outside brown carton cases. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q5. What’s your terms of delivery?
A: (1)FOB (2)CFR (3)CIF.

Q6. How about your delivery time?
A: Generally, under MOQ quantity take 5-7 working days after receiving your advance payment. The specific delivery time depends on models and the quantity of your order.

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

elastomeric coupling

Potential Causes of Failure in Elastomeric Couplings and Preventive Measures

Elastomeric couplings are generally robust and reliable components, but certain factors can lead to potential failures. Understanding these causes can help implement preventive measures to ensure optimal performance and longevity. Here are some common causes of failure and their prevention:

1. Overloading:

Exceeding the specified torque or power ratings of the elastomeric coupling can lead to premature failure. Preventive measures include selecting a coupling with appropriate torque and power ratings for the application and avoiding sudden load increases or over-torque conditions.

2. Misalignment:

Misalignment between the shafts connected by the coupling can result in increased stresses on the elastomeric element, leading to wear and failure. Regular alignment checks and adjustments can help prevent excessive misalignment.

3. Environmental Factors:

Harsh environmental conditions, such as extreme temperatures, chemicals, moisture, or corrosive substances, can degrade the elastomeric material over time. Choosing couplings with suitable materials and environmental protection can mitigate these effects.

4. Fatigue and Ageing:

Elastomeric materials can experience fatigue and aging due to cyclic loading and prolonged use. Regular inspection and replacement of couplings based on manufacturer recommendations can prevent failures caused by material deterioration.

5. Improper Installation:

Incorrect installation can lead to stress concentrations or uneven loads on the coupling, causing premature failure. Proper installation procedures, including following manufacturer guidelines, using appropriate tools, and ensuring proper shaft alignment, are essential to prevent installation-related issues.

6. Excessive Vibrations:

Excessive vibrations in the machinery can accelerate wear on the elastomeric coupling. Addressing the root causes of excessive vibrations, such as unbalanced loads or misaligned components, can help extend the coupling’s lifespan.

7. Contaminants:

Foreign particles, dirt, or debris can infiltrate the coupling and lead to abrasive wear or reduced flexibility. Regular cleaning and maintenance can prevent these issues.

8. Poor Maintenance:

Lack of routine inspection and maintenance can allow minor issues to escalate into major problems. Implementing a maintenance schedule that includes regular inspections, lubrication, and replacement of worn components can help identify and address potential failures before they occur.

By proactively addressing these potential failure causes, industrial operators can ensure reliable and efficient performance of elastomeric couplings, minimizing downtime, and reducing maintenance costs in the long run.

elastomeric coupling

Common Industries Where Elastomeric Couplings Find Significant Usage

Elastomeric couplings are versatile components widely used in various industries to facilitate efficient power transmission and protect machinery from torsional vibrations and misalignments. Some of the common industries where elastomeric couplings find significant usage include:

1. Manufacturing and Industrial Machinery:

Elastomeric couplings are commonly employed in manufacturing machinery such as conveyor systems, pumps, compressors, mixers, and machine tools. They help connect the motor and driven equipment, providing smooth power transmission and reducing vibrations.

2. Automotive:

In the automotive industry, elastomeric couplings are used in drivetrain systems, including propeller shafts, steering systems, and powertrain components. They offer excellent damping characteristics to absorb vibrations and shocks during vehicle operation.

3. Aerospace and Defense:

Elastomeric couplings play a crucial role in aerospace and defense applications, where lightweight and reliable power transmission is essential. They are used in aircraft engines, rotor systems, missile guidance systems, and various other aerospace components.

4. Energy and Power Generation:

Elastomeric couplings are used in power generation plants, including thermal, hydroelectric, and wind power plants. They connect generators to turbines and help absorb torsional vibrations, ensuring stable and efficient power transmission.

5. Oil and Gas:

In the oil and gas industry, elastomeric couplings are used in various equipment, such as pumps, compressors, and drilling rigs. They provide reliable power transmission and help protect the equipment from dynamic loads and vibrations.

6. Mining and Construction:

Elastomeric couplings are commonly found in mining and construction machinery, such as crushers, excavators, and conveyor systems. They enable efficient power transfer and help withstand heavy loads and harsh operating conditions.

7. Marine:

In marine applications, elastomeric couplings are used in propulsion systems and marine pumps. They offer excellent resistance to seawater and provide reliable power transmission in marine vessels.

8. Renewable Energy:

In the renewable energy sector, elastomeric couplings are used in wind turbines and solar tracking systems. They help adjust the alignment between the components and absorb wind and solar-induced dynamic loads.

Elastomeric couplings’ ability to dampen vibrations, compensate for misalignments, and provide flexibility makes them suitable for a wide range of industrial applications. Their widespread usage across diverse industries highlights their importance in enhancing equipment reliability, reducing maintenance costs, and improving overall operational efficiency.

elastomeric coupling

What is Elastomeric Coupling and How Does It Work in Mechanical Systems?

An elastomeric coupling is a type of flexible shaft coupling that uses an elastomeric material, typically rubber or polyurethane, to connect two shafts and transmit torque between them. The primary purpose of elastomeric couplings is to compensate for misalignments between the shafts while dampening vibrations and shocks in mechanical systems.

Construction and Working Principle:

Most elastomeric couplings consist of two hubs with a flexible element in between. The flexible element is made of high-quality elastomeric material, which is molded or bonded to the hubs. The elastomeric material is designed to be both torsionally flexible and durable.

When torque is applied to one shaft, the flexible element deforms and absorbs the misalignment between the shafts, allowing the coupling to compensate for angular, parallel, and axial misalignments. This flexibility is crucial for preventing undue stress on the connected equipment and increasing the coupling’s lifespan.

Key Features and Advantages:

1. Misalignment Compensation: Elastomeric couplings can handle small degrees of misalignment, making them suitable for applications where precise alignment is challenging or subject to change over time.

2. Vibration Dampening: The elastomeric material absorbs vibrations and shocks, resulting in reduced noise and improved smoothness of operation.

3. Fail-Safe Design: Elastomeric couplings have a fail-safe design, where if the elastomeric element were to fail, the coupling could still transmit torque without completely breaking down.

4. Simple and Economical: Elastomeric couplings are relatively simple in design, easy to install, and cost-effective compared to some other coupling types.

5. Maintenance-Free: In general, elastomeric couplings require minimal maintenance, making them a popular choice in various industries.

Applications:

Elastomeric couplings find applications in a wide range of industries and mechanical systems, including:

  • Pumps and compressors
  • Conveyor systems
  • Machine tools
  • Material handling equipment
  • Blowers and fans
  • General power transmission systems

Overall, elastomeric couplings are valued for their flexibility, shock absorption, and misalignment compensation capabilities, making them a reliable choice for transmitting torque while protecting connected equipment from harmful effects of misalignments and vibrations.

China supplier Hot High Performance Gr48 Flex Coupling Element Kit for Screw Air Compressor Spare Parts Gr65 Gr38 Gr55 Gr28 Gr42 Gr75 Gr90 Coupling Rubber  China supplier Hot High Performance Gr48 Flex Coupling Element Kit for Screw Air Compressor Spare Parts Gr65 Gr38 Gr55 Gr28 Gr42 Gr75 Gr90 Coupling Rubber
editor by CX 2023-12-25