Tag Archives: best gear

China best 1614873800 Rubber Gear Flex Coupling Element for CHINAMFG Screw Air Compressor

Product Description

 16148738

Type: Gear Flex Coupling

Applied: Atlas Copco

Certificate: iso 9 replace by Coupling Element 16148738 applies to the screw air compressor GA 90-160,807,1410 New.

Coupling Coupling
1613949900 1613982300
1614873800 1613958500
165710800 165710800
162357100 1619646700
1615678500 165714700
1615682500 1604076100
1613982300 1626510900

Coupling Features

  • Good starting performance can change the load starting of the motor to no-load starting, so as to realize the soft starting of the working machine, reduce the current during starting and reduce the starting energy consumption.
  • Save electric energy and equipment cost, which can solve the unreasonable situation of the big horse-drawn trolley with load starting machine, save the motor capacity, improve the power factor and motor efficiency of the grid, reduce reactive power loss, save electric energy, and simplify the motor starting equipment and reduce equipment cost.
  • The transferred torque can be adjusted, easy to achieve overload protection.When the working machine is overloaded or jammed, the steel ball type safety coupling will slip automatically, which can prevent the motor from burning out and other parts damage.
  • Except for the starting and braking stages, the main and driven parts of the steel ball safety coupling have no speed difference, no friction loss and high transmission efficiency.
  • Nonmetallic elastic elements are adopted in the steel ball type safety coupling, which can compensate the offset of the linked 2 axes within a certain range, with a small amount of buffering and damping.
  • Reliable operation, stable performance, convenient installation, disassembly and maintenance.

Determining the right type of flexible coupling starts with the following analysis of the application:

  • Prime mover type (motor, diesel engine, etc.) of the drive side of the system
  • Actual horsepower and/or torque requirements, not prime motor-rated horsepower (note the range of variable torque caused by periodic or unstable loads, worst-case starting loads,
  • Drive system inertia related to prime mover inertia (data available from equipment supplier)
  • vibration, linear and torsional vibration (experienced supplier or consultant can help you evaluate vibration) shaft-to-shaft deviation;
  • Note the degree of Angle offset (axis is not parallel) and parallel offset (distance between axis centers when axes are parallel but not aligned);
  • Also note whether the drive/driven units share the same floor axial (inside/outside) axial motion,
  • whether they share distance (the distance between the drive end and the driven axis), and any other space-related restrictions.

 

 

Other Couplings:

 

 

We are able to offer a wide range of special couplings, which are based on your samples or drawings.

Due to the refinement of production operations and the high-end technology, we have been able to produce high-quality Rubber Coupling, Trolley Wheel, Flexible Coupling, Flexible Rubber Coupling, Industrial Rubber Coupling, Star Coupling, CHINAMFG type Coupling Spare and other products, widely used in industrial applications.

 

All these products are tested and checked against the set quality parameters before being sent to the customer. This shows that we are willing to provide our customers with updated and perfect product lines to meet their different needs. In addition, we also provide customized solutions to provide customers with a wide range of space, so that they can choose their favorite products according to their needs and requirements.

 

Company Profile&Certifications:

      Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment. Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.

 

FAQ:

Q1. What is your product range?
A: Our products cover replacement hydraulic filter, Air compressor filters, Compressed air filter element, Heavy truck insert filters, Vacuum pump filters, and Some spare parts for compressors.

Q2. Is customized filter or OEM available? 
A: Yes, just offer your required specifications and drawings.

Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build new molds, but open new mold fee charged, when you place bulk order, the mold fee can return back.

Q4. What’s your terms of packing?
A: Generally, we pack our goods in neutral boxes,outside brown carton cases. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q5. What’s the terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balancing.

Q6. What’s your terms of delivery?
A: (1)FOB (2)CFR (3)CIF.

Q7. How about your delivery time?
A: Generally, under MOQ quantity take 5-7 working days after receiving your advance payment. The specific delivery time depends on models and the quantity of your order.

Q8. What’s your sample policy?
A: ,,,.

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

elastomeric coupling

Potential Causes of Failure in Elastomeric Couplings and Preventive Measures

Elastomeric couplings are generally robust and reliable components, but certain factors can lead to potential failures. Understanding these causes can help implement preventive measures to ensure optimal performance and longevity. Here are some common causes of failure and their prevention:

1. Overloading:

Exceeding the specified torque or power ratings of the elastomeric coupling can lead to premature failure. Preventive measures include selecting a coupling with appropriate torque and power ratings for the application and avoiding sudden load increases or over-torque conditions.

2. Misalignment:

Misalignment between the shafts connected by the coupling can result in increased stresses on the elastomeric element, leading to wear and failure. Regular alignment checks and adjustments can help prevent excessive misalignment.

3. Environmental Factors:

Harsh environmental conditions, such as extreme temperatures, chemicals, moisture, or corrosive substances, can degrade the elastomeric material over time. Choosing couplings with suitable materials and environmental protection can mitigate these effects.

4. Fatigue and Ageing:

Elastomeric materials can experience fatigue and aging due to cyclic loading and prolonged use. Regular inspection and replacement of couplings based on manufacturer recommendations can prevent failures caused by material deterioration.

5. Improper Installation:

Incorrect installation can lead to stress concentrations or uneven loads on the coupling, causing premature failure. Proper installation procedures, including following manufacturer guidelines, using appropriate tools, and ensuring proper shaft alignment, are essential to prevent installation-related issues.

6. Excessive Vibrations:

Excessive vibrations in the machinery can accelerate wear on the elastomeric coupling. Addressing the root causes of excessive vibrations, such as unbalanced loads or misaligned components, can help extend the coupling’s lifespan.

7. Contaminants:

Foreign particles, dirt, or debris can infiltrate the coupling and lead to abrasive wear or reduced flexibility. Regular cleaning and maintenance can prevent these issues.

8. Poor Maintenance:

Lack of routine inspection and maintenance can allow minor issues to escalate into major problems. Implementing a maintenance schedule that includes regular inspections, lubrication, and replacement of worn components can help identify and address potential failures before they occur.

By proactively addressing these potential failure causes, industrial operators can ensure reliable and efficient performance of elastomeric couplings, minimizing downtime, and reducing maintenance costs in the long run.

elastomeric coupling

Impact of Elastomeric Material Elasticity on Coupling Performance

The elasticity of the elastomeric material is a critical factor that significantly influences the performance of elastomeric couplings. The elasticity, or flexibility, of the elastomer allows the coupling to accommodate misalignment and torsional vibrations, providing several important benefits:

1. Misalignment Compensation:

Elastomeric couplings can handle various types of misalignment, including angular, parallel, and axial misalignments. The elasticity of the elastomer allows it to flex and absorb the misalignment between the connected shafts, reducing stress on the coupling and connected machinery.

2. Vibration Damping:

The elastomeric material acts as a natural vibration isolator, dampening torsional vibrations and shocks that occur during operation. This damping effect helps protect the connected equipment from excessive vibrations and reduces the risk of fatigue failure.

3. Shock Load Abselastomeric coupling

Advantages of Using Elastomeric Couplings in Industrial Applications

Elastomeric couplings offer several advantages that make them well-suited for various industrial applications. These advantages stem from their flexible design and the use of elastomeric materials like rubber or polyurethane. Below are the key benefits of using elastomeric couplings:

1. Misalignment Compensation:

Elastomeric couplings can tolerate and compensate for angular, parallel, and axial misalignments between connected shafts. This ability to handle misalignment reduces stress on equipment and extends the lifespan of both the coupling and the connected machinery.

2. Vibration and Shock Absorption:

The elastomeric material in the coupling acts as a natural vibration isolator, absorbing shocks and dampening vibrations. This feature is essential for reducing noise, protecting sensitive components, and enhancing the overall smoothness of operation in industrial systems.

3. No Lubrication Required:

Elastomeric couplings do not need regular lubrication, making them low-maintenance solutions for many industrial applications. This reduces the time and effort spent on maintenance tasks and minimizes the risk of contamination or leakage in certain environments.

4. Cost-Effectiveness:

Compared to some other types of couplings, elastomeric couplings are generally more cost-effective. Their simple construction and use of elastomeric materials make them affordable choices for power transmission in various industries.

5. Electrically Insulating:

Elastomeric couplings are electrically insulating, which can be advantageous in applications where electrical isolation is necessary to prevent current flow between shafts or connected equipment.

6. Fail-Safe Design:

In the event of elastomeric material failure, elastomeric couplings have a fail-safe design that allows them to continue transmitting torque, albeit with some reduction in performance. This feature ensures continued operation and prevents sudden catastrophic failures.

7. Easy Installation:

Elastomeric couplings are relatively simple to install, saving time and effort during the setup of industrial machinery.

8. Diverse Industrial Applications:

Elastomeric couplings find use in various industrial applications, including pumps, compressors, conveyor systems, machine tools, blowers, fans, and more.

Due to their ability to handle misalignment, provide vibration dampening, and require minimal maintenance, elastomeric couplings are widely utilized in industrial settings where reliability, efficiency, and cost-effectiveness are critical considerations.

China best 1614873800 Rubber Gear Flex Coupling Element for CHINAMFG Screw Air Compressor  China best 1614873800 Rubber Gear Flex Coupling Element for CHINAMFG Screw Air Compressor
editor by CX 2024-02-26

China best CHINAMFG Couplings Highly Flexible Jaw Torsionally Rigid Hydrodynamic Railway Backlash-Free Shaft Gear Universal Joint Rigid Coupling N-Eupex Elastomer

Product Description

Flender Couplings Highly Flexible Jaw Torsionally Rigid Hydrodynamic Railway Backlash-Free Shaft Gear Universal Joint Rigid Coupling N-Eupex Elastomer

FLEXIBLE COUPLINGS
Elastic CHINAMFG couplings are mateable and easy to assemble. The elastomer element compensates for shaft misalignment and absorbs impacts from the motor or work machines.

TORSIONALLY RIGID COUPLINGS
Our compact steel couplings provide highly precise transmission of high torques especially under harsh operating conditions and at extreme temperatures.

HYDRODYNAMIC COUPLINGS
Smooth start, overload protection, torsional vibration damping – FLUDEX fluid couplings enable torque-limited start-up and have very low slippage at nominal loads.

RAILWAY COUPLINGS
Whether between motor and gear unit or between gear unit and axle – CHINAMFG rail couplings have proven themselves thousands of times in virtually every kind of rail vehicle worldwide.

HIGHLY FLEXIBLE COUPLINGS
Highly elastic CHINAMFG couplings are well-suited to connect asymmetrically operating machines. They are used preferably in periodically stimulated systems.

BACKLASH-FREE COUPLINGS
Our couplings serve as a modular interface between motor and work machine to ensure reliable and backlash-free power transmission in servo- and positioning drives.

COUPLINGS
FLEXIBLE COUPLINGS
Elastic CHINAMFG couplings are mateable and easy to assemble. The elastomer element compensates for shaft misalignment and absorbs impacts from the motor or work machines.

N-EUPEX PIN COUPLING

  • Damping shaft coupling that can be used universally to compensate for shaft misalignment
  • Nominal torque range from TKN = 12 Nm up to 85,000 Nm with 23 sizes
  • Temperature range from -50 °C to +100 °C

N-EUPEX DS PIN COUPLING

  • Damping shaft coupling that can be used universally to compensate for shaft misalignments
  • Nominal torque range from TKN = 60 Nm up to 21,200 Nm with 19 sizes
  • Temperature range: from -50 °C to +100 °C

RUPEX PIN AND BUSH COUPLING

  • Damping, fail-safe pin and bush coupling for medium and higher torques
  • Nominal torque range from TKN = 200 Nm up to 1,690,000 Nm with 26 sizes
  • Temperature range: from -50 °C to +100 °C

AIQ DETECT

  • Continuous wear monitoring for N-EUPEX and RUPEX couplings including speed measurement and direction of rotation detection
  • Can be used on N-EUPEX A, B, BIC and H, size 80 to 710 and RUPEX RWN and RWS, size 105 to 2000
  • Temperature range: from -40 °C to 75 °C, IP 67, CE

N-BIPEX CLAW COUPLING

  • Damping shaft coupling that can be used universally to compensate for shaft misalignments
  • Nominal torque range from TKN = 12 Nm up to 4,650 Nm with 10 sizes
  • Temperature range: from – 50 °C to +100 °C

COUPLINGS
TORSIONALLY RIGID COUPLINGS
Our compact steel couplings provide highly precise transmission of high torques especially under harsh operating conditions and at extreme temperatures.

ZAPEX ZW GEAR COUPLING

  • Double-jointed gear coupling
  • Nominal torque range from TKN = 1,300 Nm up to 7,200,000 Nm with 31 sizes
  • Temperature range: from -20 °C to +80 °C

ZAPEX ZN GEAR COUPLING

  • Double-jointed gear coupling
  • Nominal torque range from TKN = 1,571 Nm up to 162,500 Nm with 12 sizes
  • Temperature range: from -20 °C to +80 °C

N-ARPEX ALL-STEEL COUPLING

  • Backlash-free, torsionally rigid all-steel multi-disk coupling
  • Nominal torque range from TKN = 350 Nm to 2,000,000 Nm
  • Temperature range: from -50 °C to +280 °C

ARPEX ART TURBO COUPLING

  • Torsionally rigid, backlash-free, all-steel multiple-disk coupling for high-speed applications
  • Nominal torque range from TKN = 1,000 Nm up to 588,500 Nm with 16 sizes
  • Temperature range: from -40 °C to +280 °C

SOFT AND SAFE
Hydrodynamic fluid coupling
Nominal output from 1.2 kW up to 2,500 kW with 15 sizes
Temperature range: from -40 °C to +50 °C

Especially within tough applications, drive components and processing machines are subject to extreme loads. FLUDEX couplings limit start and maximum torque within the drive train and serve as starting aids for the motor and as overload protection in the case of an incident. They also provide damping and separation of rotary oscillation, thereby reducing restoring forces to a minimum.

Fluid couplings operate according to the Föttinger principle. The coupling parts on the input and output side are not mechanically connected and are therefore wear-free. The torque is transmitted by the fluid movement in the coupling, accelerated by the radial blades. Our film illustrates the Föttinger principle as well as the operating principle of the FLUDEX coupling.

COUPLINGS
HIGHLY FLEXIBLE COUPLINGS
Highly elastic CHINAMFG couplings are well-suited to connect asymmetrically operating machines. They are used preferably in periodically stimulated systems.

ELPEX FLEXIBLE RING COUPLING

  • Highly flexible, backlash-free tire coupling
  • Nominal torque range from TKN = 1,600 Nm up to 90,000 Nm with 9 sizes
  • Temperature range: from -40 °C to +80 °C

ELPEX-B RUBBER TIRE COUPLING

  • Highly flexible, backlash-free tire coupling
  • Nominal torque range from TKN = 24 Nm up to 14,500 Nm with 15 sizes
  • Temperature range: from -50 °C to +50 °C for natural rubber materials, from
    -15 °C to +70 °C for chloroprene rubber

ELPEX-S RUBBER DISK COUPLING

  • Highly flexible rubber disk coupling to connect machines with high torque fluctuations
  • Nominal torque range from TKN = 330 Nm up to 63,000 Nm with 17 sizes
  • Temperature range: from -40 °C to +120 °C

COUPLINGS
BACKLASH FREE COUPLINGS
Our couplings serve as a modular interface between motor and work machine to ensure reliable and backlash-free power transmission in servo- and positioning drives.

BIPEX-S

  • Vibration-damping and electrically insulating claw coupling
  • Nominal torque range from TKN = 0.5 Nm to 655 Nm with 10 sizes
  • Temperature range: from -50 °C to +120 °C

SIPEX

  • Backlash-free and torsion-resistant metal bellow coupling
  • Nominal torque range from TKN = 0.1 Nm to 5,000 Nm with 20 sizes
  • Temperature range: from -30 °C to +120 °C

Why an elastic coupling of Bestseal?
An elastic coupling from Bestseal is the result of decades of product development and innovation. With this, we assure you of a high-quality component with the highest possible reliability. We see ourselves as the reliable partner of anyone who wants to set things in motion.

More than 2,000 employees work passionately every day to provide you, the customer, with the best conceivable products. DIN ISO certifications are the best proof of this. A transparent and honest way of working lies at the basis of every customer relationship with us.

Would you like to learn more about our elastic couplings or answer an important product question? 
Please contact our technical support department or sales department and let us inform you in detail about the various possibilities. 
We will be happy to think along with you based on your wishes and make you a custom offer without any obligation.

we specialized in the development and production of sealing systems   which were used in the Metallurgical,Electrical,Auto, Engineering machinery, Light industrial machinery and Electrical appliance manufacturing industries. BESEALS focus on customers’ needs,as a dependable partner and reliable supplier to help you resolve supply or technical problems ,and improve the performance of your equipments or your business. When you are facing emergency repairs situation or urgent orders,the highly responsive team of DLseals will offer you very short lead time. Beseals has a global sales network,and our seals have been sold to more than 100 countries or areas ,Such as America, England, Canada, Australia, Russian Federation ect .

FAQ

1. who are we? Are you trading company or manufacturer ?
We are manufacturer.We are based in HangZhou, China, start from 2571,sell to Domestic Market(33.00%),North America(15.00%),South America(10.00%),Western Europe(8.00%),Eastern Europe(6.00%),Souther Europe(6.00%),Southeast Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),Oceania(2.00%),South Asia(2.00%),Africa(00.00%),Eastern Asia(00.00%),Central America(00.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
PTFE Seals/Oil Seals/O Rings/Rubber Seals/Plastic Seals/Mechanical Seal/O-RING/ RING Seals.

4. why should you buy from us not from other suppliers?

Beseals is a professional manufacturer of seals .Our company specializes in the production of PU, PTFE, rubber and metal sealing components

5. How long is your delivery time?

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

6.Do you provide samples ?

is it free or extra ? Yes, we could offer the sample for free charge but you need to pay the cost of freight.

 

7. what services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,Express Delivery;

Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Escrow; Language
Spoken:English,Chinese,Japanese

For more information, please contact us. We look CHINAMFG to your arrival

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

rigid coupling

Can Rigid Couplings Handle Misalignment Between Shafts?

Rigid couplings are not designed to handle misalignment between shafts. Unlike flexible couplings that can accommodate slight misalignment through their bending or elastic properties, rigid couplings are intended to provide a fixed and immovable connection between two shafts. As a result, any misalignment between the shafts can lead to increased stress and uneven loading on connected components.

It is essential to ensure precise alignment when using rigid couplings to avoid premature wear and failure of the system. The shafts must be perfectly aligned in both the axial and angular directions before installing the rigid coupling. Proper alignment helps distribute the load evenly and reduces stress concentration on specific areas, such as bearings and keyways.

If a system requires some level of misalignment compensation due to factors like thermal expansion or slight shaft deflection, a flexible coupling should be considered instead. Flexible couplings can tolerate small degrees of angular and axial misalignment while still transmitting torque efficiently and protecting the connected equipment from excessive stress and wear.

In summary, rigid couplings are best suited for applications where precise shaft alignment can be achieved and maintained, while flexible couplings are more appropriate for systems with potential misalignment or other dynamic factors that require some degree of flexibility.

rigid coupling

Use of Rigid Couplings for Motor-to-Shaft and Shaft-to-Shaft Connections

Yes, rigid couplings can be used for both motor-to-shaft and shaft-to-shaft connections in mechanical systems. Rigid couplings are designed to provide a solid and non-flexible connection between two shafts. This characteristic makes them versatile for various applications, including motor-to-shaft and shaft-to-shaft connections.

1. Motor-to-Shaft Connections: In motor-to-shaft connections, a rigid coupling is used to connect the output shaft of an electric motor to the driven shaft of a machine or equipment. This ensures direct power transmission without any flexibility. Motor-to-shaft connections are common in applications where the motor’s rotational motion needs to be transferred to the driven equipment with high precision and efficiency.

2. Shaft-to-Shaft Connections: In shaft-to-shaft connections, a rigid coupling joins two shafts directly, providing a solid and immovable link between them. This is beneficial in applications where precise alignment and torque transmission are essential, such as in precision motion control systems or heavy-duty industrial machinery.

Rigid couplings are available in various designs, such as one-piece, two-piece, and split types, to accommodate different shaft arrangements. The type of rigid coupling used depends on the specific application and the shaft sizes to be connected.

Advantages of Using Rigid Couplings:

– Zero backlash ensures accurate motion transfer and positioning.

– Efficient power transmission without loss due to flexibility.

– Minimal maintenance requirements due to their simple design.

– High torque capacity suitable for heavy-duty applications.

– Tolerance to misalignment (within design limits) enhances versatility.

– Provides system stiffness, reducing the risk of resonance and vibration-related issues.

– Suitable for high-speed applications.

– Versatility for various industrial applications.

Whether it’s connecting a motor to a driven shaft or joining two shafts together, rigid couplings offer reliability, precision, and efficiency, making them a popular choice in numerous mechanical systems.

rigid coupling

Materials Used in Manufacturing Rigid Couplings:

Rigid couplings are designed to provide a strong and durable connection between two shafts, and they are commonly made from a variety of materials to suit different applications. The choice of material depends on factors such as the application’s environment, load capacity, and cost considerations. Some common materials used in manufacturing rigid couplings include:

  • 1. Steel: Steel is one of the most widely used materials for rigid couplings. It offers excellent strength, durability, and resistance to wear. Steel couplings are suitable for a wide range of applications, including industrial machinery, automotive systems, and power transmission.
  • 2. Stainless Steel: Stainless steel couplings are used in applications where corrosion resistance is crucial. They are well-suited for environments with high humidity, moisture, or exposure to chemicals. Stainless steel couplings are commonly used in food processing, pharmaceuticals, marine, and outdoor applications.
  • 3. Aluminum: Aluminum couplings are known for their lightweight and corrosion-resistant properties. They are often used in applications where weight reduction is essential, such as aerospace and automotive industries.
  • 4. Brass: Brass couplings offer good corrosion resistance and are commonly used in plumbing and water-related applications.
  • 5. Cast Iron: Cast iron couplings provide high strength and durability, making them suitable for heavy-duty industrial applications and machinery.
  • 6. Bronze: Bronze couplings are known for their excellent wear resistance and are often used in applications involving heavy loads and low speeds.
  • 7. Plastics: Some rigid couplings are made from various plastics, such as nylon or Delrin. Plastic couplings are lightweight, non-conductive, and suitable for applications where electrical insulation is required.

It’s essential to consider the specific requirements of the application, including factors like load capacity, operating environment, and cost, when choosing the appropriate material for a rigid coupling. The right material selection ensures that the coupling can withstand the forces and conditions it will encounter, resulting in a reliable and long-lasting connection between the shafts.

China best CHINAMFG Couplings Highly Flexible Jaw Torsionally Rigid Hydrodynamic Railway Backlash-Free Shaft Gear Universal Joint Rigid Coupling N-Eupex Elastomer  China best CHINAMFG Couplings Highly Flexible Jaw Torsionally Rigid Hydrodynamic Railway Backlash-Free Shaft Gear Universal Joint Rigid Coupling N-Eupex Elastomer
editor by CX 2024-02-20

China best CHINAMFG Customized Variable Speed Coupling, Hydraulic Gear Coupling, Torque Limiting Coupling gear coupling

Product Description

Densen customized variable speed coupling,hydraulic gear coupling,torque limiting coupling

 

Product Name Fluid coupling,constant fluid coupling,fluid coupling yox
DN mm 16~190mm
Rated Torque 40~25000 N·m
Allowable speed 4500~200 kN·m
Material 45#steel
Application Widely used in metallurgy, mining, engineering and other fields.

 

Product show

Company Information

Equipment

 

Application Case

Typical case of diaphragm coupling applied to variable frequency speed control equipment

JMB type coupling is applied to HangZhou Oilfield Thermal Power Plant

According to the requirements of HangZhou Electric Power Corporation, HangZhou Oilfield Thermal Power Plant should dynamically adjust the power generation according to the load of the power grid and market demand, and carry out the transformation of the frequency converter and the suction fan. The motor was originally a 1600KW, 730RPM non-frequency variable speed motor matched by HangZhou Motor Factory. The speed control mode after changing the frequency is manual control. Press the button speed to increase 10RPM or drop 10RPM. The coupling is still the original elastic decoupling coupling, and the elastic de-coupling coupling after frequency conversion is frequently damaged, which directly affects the normal power generation.

It is found through analysis that in the process of frequency conversion speed regulation, the pin of the coupling can not bear the inertia of the speed regulation process (the diameter of the fan impeller is 3.3 meters) and is cut off, which has great damage to the motor and the fan.

Later, they switched to the JMB460 double-diaphragm wheel-type coupling of our factory (patent number: ZL.99246247.9). After 1 hour of destructive experiment and more than 1 year of operation test, the equipment is running very well, and there is no Replace the diaphragm. 12 units have been rebuilt and the operation is in good condition.

 

Other Application Case

 

Spare parts

 

Packaging & Shipping

 

Contact us

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flange coupling

Selection of Gear Couplings for Specific Applications

Choosing the appropriate gear coupling for a specific application involves considering several factors to ensure optimal performance and reliability. Here are the key steps in the selection process:

  1. Identify Application Requirements: Understand the specific requirements of the application, including the torque and speed requirements, operating conditions, and the amount of angular and axial misalignment expected in the system.
  2. Calculate Torque and Speed: Determine the required torque and speed ratings for the gear coupling based on the power transmission needs of the application. Consider both peak and continuous torque requirements.
  3. Consider Misalignment: Evaluate the amount and type of misalignment that the gear coupling needs to accommodate. Different gear coupling designs have varying degrees of misalignment capabilities, so it’s essential to choose one that can handle the expected misalignment in the system.
  4. Check Space Constraints: Consider the available space for installing the gear coupling. Some applications may have limited space, requiring compact or specially designed couplings to fit properly.
  5. Assess Environmental Conditions: Determine if the application involves exposure to extreme temperatures, corrosive substances, or other harsh environmental factors. Select a gear coupling made from materials that can withstand the specific environmental conditions.
  6. Consider Maintenance Requirements: Evaluate the maintenance needs of the gear coupling. Some designs may require more frequent maintenance than others. For applications where regular maintenance is challenging, consider maintenance-free gear coupling options.
  7. Check Industry Standards and Certifications: Ensure that the selected gear coupling meets relevant industry standards and certifications to guarantee quality and safety.
  8. Consult with Experts: If needed, seek guidance from coupling manufacturers or engineering experts who can provide valuable insights and recommendations based on their experience and expertise.

By carefully considering these factors and understanding the specific demands of the application, you can select the most suitable gear coupling that will provide reliable and efficient power transmission while minimizing the risk of premature failure or downtime.

China best CHINAMFG Customized Variable Speed Coupling, Hydraulic Gear Coupling, Torque Limiting Coupling  gear couplingChina best CHINAMFG Customized Variable Speed Coupling, Hydraulic Gear Coupling, Torque Limiting Coupling  gear coupling
editor by CX 2024-02-06

China best Gcld Drum Tooth Coupling 45# Steel Tooth Coupling Power Shaft Transmission Pin Gear Flexible Coupling gear coupling

Product Description

GCLD gear coupling Drum toothed coupling

Description: 

GCLD series of drum gear coupling, especially suitable for low speed and heavy load conditions, such as metallurgy, mining, lifting and transportation industries, also suitable for petroleum, chemical, general machinery and other machinery shafting transmission.Characteristics of drum gear coupling (compared with straight gear coupling, it has the following characteristics). 

Parameters:

Norminal Torque: 0.4kN. M – 4500kN. M
Allowed Rotation Speed: 4000rpm -460rpm
Connection: Keyway & Shaft hole 
Shaft Hole Diameter: 16mm – 1040mm
Shaft Hole Length (Y): 42mm – 1100mm

 

Advantages:

1. The bearing capacity is strong.
2. Large amount of angular displacement compensation
3. The drum shaped tooth surface improves the contact conditions of the inner and outer teeth, avoids the disadvantages of edge extrusion and stress concentration at the straight tooth end under the condition of angular displacement, improves the friction and wear condition of the tooth surface, reduces the noise, and has a long maintenance cycle;
4. The tooth end of the outer tooth sleeve is in the shape of a horn, which makes the assembly and disassembly of the inner and outer teeth very convenient.
5. The transmission efficiency is as high as 99.7%.

Packing & Delivery:

Applications:
Metallurgy, mining, lifting and transportation industries, petroleum, chemical, general machinery and other heavy machinery shaft drive.

About us:
HangZhou CHINAMFG machinery technology Co., Ltd is an industry transmission solutions manufacuturer and service provider.

We offer 1 stop solution for power transmission products for different factories, such as chemicals, energy, material handling, environmental, extraction, pulp and paper, steel and metal, food and beverage, and construction industries.

We supply: Customised gears, Small gearmotors, Industrial gearboxes, Motors, Brand product sourcing.

Our industrial Gear, Gearbox, gearmotor and motor are sold to more than 30 countries. High quality, good price, in time response and sincere service are our value and promises. We aim at making happy cooperation with our customers, bring them reliable and comfortable service.
  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flange coupling

Limitations and Disadvantages of Using Gear Couplings

While gear couplings offer many advantages, they also have some limitations and disadvantages that should be considered when selecting coupling solutions for specific applications:

  • Cost: Gear couplings can be more expensive compared to other types of couplings, especially when precision machining or specialized materials are required. The initial investment might be higher, but the long-term benefits may outweigh the cost.
  • Size and Weight: Gear couplings are generally larger and heavier than some other coupling types. This can impact the overall size and weight of the machinery, which may be a concern in applications with limited space or weight restrictions.
  • Maintenance: Gear couplings require regular maintenance, including lubrication and periodic inspection to ensure proper functioning. Neglecting maintenance can lead to premature wear and failure.
  • Backlash: Like other gear mechanisms, gear couplings may have some inherent backlash due to the clearance between gear teeth. This slight play can affect precision applications where accurate motion transmission is critical.
  • Noise and Vibration: Gear couplings can generate more noise and vibration compared to flexible couplings, especially at higher speeds. This can be a concern in applications that require low-noise operation.
  • Misalignment Tolerance: While gear couplings can handle moderate misalignment, they may not be as forgiving as flexible couplings in accommodating significant shaft misalignment.

Despite these limitations, gear couplings remain a popular choice for many applications, particularly in heavy-duty industrial settings where they excel in transmitting high torque and handling demanding conditions. Proper selection, installation, and maintenance can help mitigate some of the disadvantages, making gear couplings a reliable choice for power transmission in various industries.

China best Gcld Drum Tooth Coupling 45# Steel Tooth Coupling Power Shaft Transmission Pin Gear Flexible Coupling  gear couplingChina best Gcld Drum Tooth Coupling 45# Steel Tooth Coupling Power Shaft Transmission Pin Gear Flexible Coupling  gear coupling
editor by CX 2024-02-05

China best 1613958500 Rubber Gear Flex Coupling Element Kit for CHINAMFG Screw Air Compressor Replacement Part Ga45 Ga55

Product Description

Product Description

16139585/1613982300

Type: Gear Flex Coupling

Applied: Atlas Copco

Certificate: iso 9001.

 

Coupling Selection Method

  • Torque – power [kW] • Speed [r/min]
  • Type of equipment and application
  • Shaft diameters
  • Shaft gaps
  • Physical space limitation
  • Special bore or finish information

Coupling Features

  • Good starting performance can change the load starting of the motor to no-load starting, so as to realize the soft starting of the working machine, reduce the current during starting and reduce the starting energy consumption.
  • Save electric energy and equipment cost, which can solve the unreasonable situation of the big horse-drawn trolley with load starting machine, save the motor capacity, improve the power factor and motor efficiency of the grid, reduce reactive power loss, save electric energy, and simplify the motor starting equipment and reduce equipment cost.
  • The transferred torque can be adjusted, easy to achieve overload protection.When the working machine is overloaded or jammed, the steel ball type safety coupling will slip automatically, which can prevent the motor from burning out and other parts damage.
  • Except for the starting and braking stages, the main and driven parts of the steel ball safety coupling have no speed difference, no friction loss and high transmission efficiency.
  • Nonmetallic elastic elements are adopted in the steel ball type safety coupling, which can compensate the offset of the linked 2 axes within a certain range, with a small amount of buffering and damping.
  • Reliable operation, stable performance, convenient installation, disassembly and maintenance.

 

Detailed Photos

 

Determining the right type of flexible coupling starts with the following analysis of the application:

  • Prime mover type (motor, diesel engine, etc.) of the drive side of the system
  • Actual horsepower and/or torque requirements, not prime motor-rated horsepower (note the range of variable torque caused by periodic or unstable loads, worst-case starting loads,
  • Drive system inertia related to prime mover inertia (data available from equipment supplier)
  • vibration, linear and torsional vibration (experienced supplier or consultant can help you evaluate vibration) shaft-to-shaft deviation;
  • Note the degree of Angle offset (axis is not parallel) and parallel offset (distance between axis centers when axes are parallel but not aligned);
  • Also note whether the drive/driven units share the same floor axial (inside/outside) axial motion,
  • whether they share distance (the distance between the drive end and the driven axis), and any other space-related restrictions.

 

We are able to offer a wide range of special couplings, which are based on your samples or drawings.

Due to the refinement of production operations and the high-end technology, we have been able to produce high-quality Rubber Coupling, Trolley Wheel, Flexible Coupling, Flexible Rubber Coupling, Industrial Rubber Coupling, Star Coupling, CHINAMFG type Coupling Spare and other products, widely used in industrial applications.

 

All these products are tested and checked against the set quality parameters before being sent to the customer. This shows that we are willing to provide our customers with updated and perfect product lines to meet their different needs. In addition, we also provide customized solutions to provide customers with a wide range of space, so that they can choose their favorite products according to their needs and requirements.
 

More Products for Choose

Coupling Coupling
1613949900 1613982300
1614873800 1613958500
165710800 165710800
162357100 1619646700
1615678500 165714700
1615682500 1604076100
1613982300 1626510900

Tips:
 
This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.
 

 

Company Profile

       Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment. Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.

Company team

Our company is located in the beautiful coastal city of HangZhou,is a professional manufacturer of air compressor filters and separators,

We repect the enterprise spirit of “steadyfastness,hard work and responsibility” and creat a good corporate environment based on the operation principle of “Integrity,reliability and innovation”.

 

 

With the survival idea of “perfect technology, good service and excellent quality”,
We always adhere to customer first,
aim at serving customer sincerely and touching customer with our service.

We plunge ourselves to provide clear and sustainable comprssed air to our customer,
meanwhile constantly pursue to save the sunning cost of compressor system for them.
Profession, concentration, focus is our corporate philosophy.

 

Packaging & Shipping

 

 

FAQ

 Q1. What is your product range?

A: Our products cover replacement hydraulic filter, Air compressor filters, Compressed air filter element, Heavy truck insert filters, Vacuum pump filters, and Some spare parts for compressors.

Q2. Is customized filter or OEM available? 
A: Yes, just offer your required specifications and drawings.

Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build new molds, but open new mold fee charged, when you place bulk order, the mold fee can return back.

Q4. What’s your terms of packing?
A: Generally, we pack our goods in neutral boxes,outside brown carton cases. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q5. What’s the terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balancing.

Q6. What’s your terms of delivery?
A: (1)FOB (2)CFR (3)CIF.

Q7. How about your delivery time?
A: Generally, under MOQ quantity take 5-7 working days after receiving your advance payment. The specific delivery time depends on models and the quantity of your order.

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

elastomeric coupling

Potential Causes of Failure in Elastomeric Couplings and Preventive Measures

Elastomeric couplings are generally robust and reliable components, but certain factors can lead to potential failures. Understanding these causes can help implement preventive measures to ensure optimal performance and longevity. Here are some common causes of failure and their prevention:

1. Overloading:

Exceeding the specified torque or power ratings of the elastomeric coupling can lead to premature failure. Preventive measures include selecting a coupling with appropriate torque and power ratings for the application and avoiding sudden load increases or over-torque conditions.

2. Misalignment:

Misalignment between the shafts connected by the coupling can result in increased stresses on the elastomeric element, leading to wear and failure. Regular alignment checks and adjustments can help prevent excessive misalignment.

3. Environmental Factors:

Harsh environmental conditions, such as extreme temperatures, chemicals, moisture, or corrosive substances, can degrade the elastomeric material over time. Choosing couplings with suitable materials and environmental protection can mitigate these effects.

4. Fatigue and Ageing:

Elastomeric materials can experience fatigue and aging due to cyclic loading and prolonged use. Regular inspection and replacement of couplings based on manufacturer recommendations can prevent failures caused by material deterioration.

5. Improper Installation:

Incorrect installation can lead to stress concentrations or uneven loads on the coupling, causing premature failure. Proper installation procedures, including following manufacturer guidelines, using appropriate tools, and ensuring proper shaft alignment, are essential to prevent installation-related issues.

6. Excessive Vibrations:

Excessive vibrations in the machinery can accelerate wear on the elastomeric coupling. Addressing the root causes of excessive vibrations, such as unbalanced loads or misaligned components, can help extend the coupling’s lifespan.

7. Contaminants:

Foreign particles, dirt, or debris can infiltrate the coupling and lead to abrasive wear or reduced flexibility. Regular cleaning and maintenance can prevent these issues.

8. Poor Maintenance:

Lack of routine inspection and maintenance can allow minor issues to escalate into major problems. Implementing a maintenance schedule that includes regular inspections, lubrication, and replacement of worn components can help identify and address potential failures before they occur.

By proactively addressing these potential failure causes, industrial operators can ensure reliable and efficient performance of elastomeric couplings, minimizing downtime, and reducing maintenance costs in the long run.

elastomeric coupling

Impact of Temperature Variation on Elastomeric Coupling Performance

Temperature variation can significantly affect the performance of elastomeric couplings due to the properties of the elastomeric material used in their construction. Here are the key ways temperature variation can influence coupling performance:

1. Elasticity and Flexibility:

Elastomeric materials exhibit changes in their elasticity and flexibility with temperature. At lower temperatures, the elastomer may become stiffer, reducing its ability to compensate for misalignments and absorb vibrations. Conversely, at higher temperatures, the elastomer may become softer, affecting the coupling’s torsional stiffness and load-carrying capacity.

2. Damping Characteristics:

Temperature changes can impact the damping characteristics of the elastomer. Elastomeric couplings rely on the damping properties of the material to absorb vibrations and shocks. Temperature-related variations can alter the material’s ability to dampen vibrations, affecting the coupling’s performance in reducing dynamic loads.

3. Wear and Degradation:

Elastomeric materials can undergo wear and degradation with temperature fluctuations. Excessive heat can accelerate the aging process of the elastomer, leading to material hardening, cracking, and reduced service life. Extreme temperature conditions may also cause the elastomer to soften and lose its structural integrity.

4. Tolerance to High Temperatures:

Some elastomeric couplings are designed to withstand higher temperatures than others. Extreme heat can cause traditional elastomeric materials to exceed their temperature limits, leading to failure or reduced performance. Specialized high-temperature elastomers or alternative materials may be required for applications operating in elevated temperature environments.

5. Torque and Power Ratings:

Temperature changes can influence the torque and power ratings of the elastomeric coupling. It is essential to consider the temperature variation when selecting a coupling for a specific application to ensure that it can handle the expected loads safely and reliably.

6. Environmental Conditions:

Elastomeric couplings operating in extreme temperature environments may also encounter other environmental factors like humidity, chemicals, and exposure to harsh substances, which can further impact the material properties and coupling performance.

To mitigate the effects of temperature variation on elastomeric coupling performance, it is crucial to select a coupling with suitable elastomeric material capable of withstanding the expected temperature range. Regular maintenance, periodic inspection, and adherence to the manufacturer’s temperature limits and guidelines will help ensure optimal performance and prolong the lifespan of the coupling in temperature-varying operating conditions.

elastomeric coupling

Differences Between Elastomeric Couplings and Other Types of Couplings (Jaw Couplings, Gear Couplings, etc.)

Elastomeric couplings, jaw couplings, and gear couplings are all types of flexible couplings used in mechanical power transmission. Each type has its unique features, advantages, and limitations. Below are the main differences between these couplings:

Elastomeric Couplings:

  • Construction: Elastomeric couplings consist of two hubs connected by a flexible elastomeric element, typically made of rubber or polyurethane.
  • Misalignment Compensation: Elastomeric couplings excel at compensating for angular, parallel, and axial misalignments between connected shafts.
  • Vibration Dampening: The elastomeric material in these couplings acts as a natural vibration isolator, reducing shocks and vibrations in the system.
  • Speed and Torque Capacity: Elastomeric couplings are suitable for moderate torque and speed applications but may have limitations in high-torque or high-speed scenarios.
  • Electrically Insulating: Elastomeric couplings offer electrical isolation between shafts in applications where electrical insulation is necessary.
  • Temperature Range: Elastomeric couplings have temperature limitations and may not be suitable for extreme temperature environments.

Jaw Couplings:

  • Construction: Jaw couplings consist of two hubs with interlocking curved jaws that transmit torque.
  • Misalignment Compensation: Jaw couplings can handle slight misalignments but have more limited misalignment compensation compared to elastomeric couplings.
  • Vibration Dampening: They offer some vibration dampening but not as effective as elastomeric couplings.
  • Speed and Torque Capacity: Jaw couplings can handle higher torque and speed compared to elastomeric couplings.
  • Noise: Jaw couplings can produce more noise during operation compared to elastomeric couplings.
  • Maintenance: They require periodic lubrication for optimal performance.

Gear Couplings:

  • Construction: Gear couplings consist of two hubs with external teeth that mesh together, transmitting torque.
  • Misalignment Compensation: Gear couplings can handle angular misalignments but are less effective in parallel and axial misalignment compensation compared to elastomeric couplings.
  • Vibration Dampening: They provide minimal vibration dampening compared to elastomeric couplings.
  • Speed and Torque Capacity: Gear couplings are suitable for high-torque and high-speed applications.
  • Temperature Range: They can operate in a wider temperature range compared to elastomeric couplings.
  • Maintenance: Gear couplings require regular maintenance, including lubrication and periodic inspection.

Ultimately, the choice between elastomeric couplings, jaw couplings, gear couplings, or other types depends on the specific requirements of the application, including load, speed, misalignment, environmental conditions, and maintenance preferences. Proper coupling selection is crucial for ensuring reliable and efficient power transmission in industrial systems.

China best 1613958500 Rubber Gear Flex Coupling Element Kit for CHINAMFG Screw Air Compressor Replacement Part Ga45 Ga55  China best 1613958500 Rubber Gear Flex Coupling Element Kit for CHINAMFG Screw Air Compressor Replacement Part Ga45 Ga55
editor by CX 2024-02-04

China Best Sales CHINAMFG Couplings Highly Flexible Jaw Torsionally Rigid Hydrodynamic Railway Backlash-Free Shaft Gear Universal Joint Rigid Coupling N-Eupex Elastomer

Product Description

Flender Couplings Highly Flexible Jaw Torsionally Rigid Hydrodynamic Railway Backlash-Free Shaft Gear Universal Joint Rigid Coupling N-Eupex Elastomer

FLEXIBLE COUPLINGS
Elastic CHINAMFG couplings are mateable and easy to assemble. The elastomer element compensates for shaft misalignment and absorbs impacts from the motor or work machines.

TORSIONALLY RIGID COUPLINGS
Our compact steel couplings provide highly precise transmission of high torques especially under harsh operating conditions and at extreme temperatures.

HYDRODYNAMIC COUPLINGS
Smooth start, overload protection, torsional vibration damping – FLUDEX fluid couplings enable torque-limited start-up and have very low slippage at nominal loads.

RAILWAY COUPLINGS
Whether between motor and gear unit or between gear unit and axle – CHINAMFG rail couplings have proven themselves thousands of times in virtually every kind of rail vehicle worldwide.

HIGHLY FLEXIBLE COUPLINGS
Highly elastic CHINAMFG couplings are well-suited to connect asymmetrically operating machines. They are used preferably in periodically stimulated systems.

BACKLASH-FREE COUPLINGS
Our couplings serve as a modular interface between motor and work machine to ensure reliable and backlash-free power transmission in servo- and positioning drives.

COUPLINGS
FLEXIBLE COUPLINGS
Elastic CHINAMFG couplings are mateable and easy to assemble. The elastomer element compensates for shaft misalignment and absorbs impacts from the motor or work machines.

N-EUPEX PIN COUPLING

  • Damping shaft coupling that can be used universally to compensate for shaft misalignment
  • Nominal torque range from TKN = 12 Nm up to 85,000 Nm with 23 sizes
  • Temperature range from -50 °C to +100 °C

N-EUPEX DS PIN COUPLING

  • Damping shaft coupling that can be used universally to compensate for shaft misalignments
  • Nominal torque range from TKN = 60 Nm up to 21,200 Nm with 19 sizes
  • Temperature range: from -50 °C to +100 °C

RUPEX PIN AND BUSH COUPLING

  • Damping, fail-safe pin and bush coupling for medium and higher torques
  • Nominal torque range from TKN = 200 Nm up to 1,690,000 Nm with 26 sizes
  • Temperature range: from -50 °C to +100 °C

AIQ DETECT

  • Continuous wear monitoring for N-EUPEX and RUPEX couplings including speed measurement and direction of rotation detection
  • Can be used on N-EUPEX A, B, BIC and H, size 80 to 710 and RUPEX RWN and RWS, size 105 to 2000
  • Temperature range: from -40 °C to 75 °C, IP 67, CE

N-BIPEX CLAW COUPLING

  • Damping shaft coupling that can be used universally to compensate for shaft misalignments
  • Nominal torque range from TKN = 12 Nm up to 4,650 Nm with 10 sizes
  • Temperature range: from – 50 °C to +100 °C

COUPLINGS
TORSIONALLY RIGID COUPLINGS
Our compact steel couplings provide highly precise transmission of high torques especially under harsh operating conditions and at extreme temperatures.

ZAPEX ZW GEAR COUPLING

  • Double-jointed gear coupling
  • Nominal torque range from TKN = 1,300 Nm up to 7,200,000 Nm with 31 sizes
  • Temperature range: from -20 °C to +80 °C

ZAPEX ZN GEAR COUPLING

  • Double-jointed gear coupling
  • Nominal torque range from TKN = 1,571 Nm up to 162,500 Nm with 12 sizes
  • Temperature range: from -20 °C to +80 °C

N-ARPEX ALL-STEEL COUPLING

  • Backlash-free, torsionally rigid all-steel multi-disk coupling
  • Nominal torque range from TKN = 350 Nm to 2,000,000 Nm
  • Temperature range: from -50 °C to +280 °C

ARPEX ART TURBO COUPLING

  • Torsionally rigid, backlash-free, all-steel multiple-disk coupling for high-speed applications
  • Nominal torque range from TKN = 1,000 Nm up to 588,500 Nm with 16 sizes
  • Temperature range: from -40 °C to +280 °C

SOFT AND SAFE
Hydrodynamic fluid coupling
Nominal output from 1.2 kW up to 2,500 kW with 15 sizes
Temperature range: from -40 °C to +50 °C

Especially within tough applications, drive components and processing machines are subject to extreme loads. FLUDEX couplings limit start and maximum torque within the drive train and serve as starting aids for the motor and as overload protection in the case of an incident. They also provide damping and separation of rotary oscillation, thereby reducing restoring forces to a minimum.

Fluid couplings operate according to the Föttinger principle. The coupling parts on the input and output side are not mechanically connected and are therefore wear-free. The torque is transmitted by the fluid movement in the coupling, accelerated by the radial blades. Our film illustrates the Föttinger principle as well as the operating principle of the FLUDEX coupling.

COUPLINGS
HIGHLY FLEXIBLE COUPLINGS
Highly elastic CHINAMFG couplings are well-suited to connect asymmetrically operating machines. They are used preferably in periodically stimulated systems.

ELPEX FLEXIBLE RING COUPLING

  • Highly flexible, backlash-free tire coupling
  • Nominal torque range from TKN = 1,600 Nm up to 90,000 Nm with 9 sizes
  • Temperature range: from -40 °C to +80 °C

ELPEX-B RUBBER TIRE COUPLING

  • Highly flexible, backlash-free tire coupling
  • Nominal torque range from TKN = 24 Nm up to 14,500 Nm with 15 sizes
  • Temperature range: from -50 °C to +50 °C for natural rubber materials, from
    -15 °C to +70 °C for chloroprene rubber

ELPEX-S RUBBER DISK COUPLING

  • Highly flexible rubber disk coupling to connect machines with high torque fluctuations
  • Nominal torque range from TKN = 330 Nm up to 63,000 Nm with 17 sizes
  • Temperature range: from -40 °C to +120 °C

COUPLINGS
BACKLASH FREE COUPLINGS
Our couplings serve as a modular interface between motor and work machine to ensure reliable and backlash-free power transmission in servo- and positioning drives.

BIPEX-S

  • Vibration-damping and electrically insulating claw coupling
  • Nominal torque range from TKN = 0.5 Nm to 655 Nm with 10 sizes
  • Temperature range: from -50 °C to +120 °C

SIPEX

  • Backlash-free and torsion-resistant metal bellow coupling
  • Nominal torque range from TKN = 0.1 Nm to 5,000 Nm with 20 sizes
  • Temperature range: from -30 °C to +120 °C

Why an elastic coupling of Bestseal?
An elastic coupling from Bestseal is the result of decades of product development and innovation. With this, we assure you of a high-quality component with the highest possible reliability. We see ourselves as the reliable partner of anyone who wants to set things in motion.

More than 2,000 employees work passionately every day to provide you, the customer, with the best conceivable products. DIN ISO certifications are the best proof of this. A transparent and honest way of working lies at the basis of every customer relationship with us.

Would you like to learn more about our elastic couplings or answer an important product question? 
Please contact our technical support department or sales department and let us inform you in detail about the various possibilities. 
We will be happy to think along with you based on your wishes and make you a custom offer without any obligation.

we specialized in the development and production of sealing systems   which were used in the Metallurgical,Electrical,Auto, Engineering machinery, Light industrial machinery and Electrical appliance manufacturing industries. BESEALS focus on customers’ needs,as a dependable partner and reliable supplier to help you resolve supply or technical problems ,and improve the performance of your equipments or your business. When you are facing emergency repairs situation or urgent orders,the highly responsive team of DLseals will offer you very short lead time. Beseals has a global sales network,and our seals have been sold to more than 100 countries or areas ,Such as America, England, Canada, Australia, Russian Federation ect .

FAQ

1. who are we? Are you trading company or manufacturer ?
We are manufacturer.We are based in HangZhou, China, start from 2571,sell to Domestic Market(33.00%),North America(15.00%),South America(10.00%),Western Europe(8.00%),Eastern Europe(6.00%),Souther Europe(6.00%),Southeast Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),Oceania(2.00%),South Asia(2.00%),Africa(00.00%),Eastern Asia(00.00%),Central America(00.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
PTFE Seals/Oil Seals/O Rings/Rubber Seals/Plastic Seals/Mechanical Seal/O-RING/ RING Seals.

4. why should you buy from us not from other suppliers?

Beseals is a professional manufacturer of seals .Our company specializes in the production of PU, PTFE, rubber and metal sealing components

5. How long is your delivery time?

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

6.Do you provide samples ?

is it free or extra ? Yes, we could offer the sample for free charge but you need to pay the cost of freight.

 

7. what services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,Express Delivery;

Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Escrow; Language
Spoken:English,Chinese,Japanese

For more information, please contact us. We look CHINAMFG to your arrival

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

elastomeric coupling

Real-World Applications and Success Stories of Elastomeric Couplings in Challenging Environments

Elastomeric couplings have demonstrated their effectiveness and reliability in numerous challenging industrial environments. Here are some real-world applications and success stories:

1. Wind Turbines:

Elastomeric couplings are commonly used in wind turbines to connect the gearbox to the generator. The couplings accommodate misalignments caused by wind-induced movements and thermal variations, ensuring efficient power transmission even in harsh wind farm conditions.

2. Steel Mills:

In steel mills, elastomeric couplings are employed in rolling mills and conveyor systems. These couplings dampen vibrations generated during the rolling process, protecting the machinery and reducing maintenance costs.

3. Marine Propulsion:

In marine applications, elastomeric couplings connect the engine to the propeller shaft, accommodating shaft misalignments caused by hull flexing and propeller thrust. The couplings’ shock-absorbing properties protect the drivetrain from sudden load changes and contribute to smooth and efficient propulsion.

4. Mining Equipment:

In mining operations, elastomeric couplings are used in crushers, conveyors, and other equipment. They handle misalignments caused by uneven terrain and reduce shock loads during the crushing and conveying processes, increasing equipment durability and uptime.

5. Chemical Processing:

Elastomeric couplings find application in chemical processing equipment that handles corrosive substances and operates at varying temperatures. The couplings’ resistance to chemicals and ability to accommodate thermal expansion contribute to reliable and efficient performance in these harsh environments.

6. Offshore Oil & Gas Platforms:

In offshore platforms, elastomeric couplings connect pumps, compressors, and generators, allowing them to handle misalignments caused by platform movement and temperature fluctuations. The couplings’ ability to dampen vibrations and absorb shock loads enhances equipment longevity and safety.

7. Power Generation:

In power plants, elastomeric couplings are used in gas turbines, steam turbines, and other power generation equipment. They dampen torsional vibrations and compensate for thermal growth, contributing to efficient power production and reduced maintenance costs.

8. Paper and Pulp Industry:

In paper and pulp mills, elastomeric couplings connect the motors to the rollers and conveyors. The couplings’ flexibility and shock-absorbing properties protect the machinery from sudden load changes, leading to smoother operations and increased productivity.

These real-world success stories showcase how elastomeric couplings excel in challenging environments, delivering reliable and efficient performance across various industries. Their ability to handle misalignments, dampen vibrations, and absorb shocks makes them a valuable component in demanding industrial applications.

elastomeric coupling

Impact of Elastomeric Material Elasticity on Coupling Performance

The elasticity of the elastomeric material is a critical factor that significantly influences the performance of elastomeric couplings. The elasticity, or flexibility, of the elastomer allows the coupling to accommodate misalignment and torsional vibrations, providing several important benefits:

1. Misalignment Compensation:

Elastomeric couplings can handle various types of misalignment, including angular, parallel, and axial misalignments. The elasticity of the elastomer allows it to flex and absorb the misalignment between the connected shafts, reducing stress on the coupling and connected machinery.

2. Vibration Damping:

The elastomeric material acts as a natural vibration isolator, dampening torsional vibrations and shocks that occur during operation. This damping effect helps protect the connected equipment from excessive vibrations and reduces the risk of fatigue failure.

3. Shock Load Abselastomeric coupling

Can Elastomeric Couplings Handle Misalignment Between Shafts Effectively?

Yes, elastomeric couplings are designed to handle misalignment between shafts effectively. Their flexible and resilient elastomeric material allows them to accommodate various types of misalignment, including:

  • Angular Misalignment: When the axes of the two connected shafts are not collinear and form an angle, elastomeric couplings can flex and compensate for this angular misalignment. This is crucial in applications where shafts are not perfectly aligned due to manufacturing tolerances, installation errors, or structural settling.
  • Parallel Misalignment: When the axes of the two shafts are not perfectly parallel but have some lateral offset, elastomeric couplings can accommodate this misalignment by allowing a certain degree of lateral movement between the hubs.
  • Axial Misalignment: When the two shafts are not perfectly aligned along their common axis, causing a gap or overlap between them, elastomeric couplings can flex and absorb this axial misalignment, preventing excessive forces on the connected machinery.

The elastomeric material used in these couplings acts as a natural shock absorber and isolates vibrations, which helps prevent excessive wear on equipment and reduces the risk of damage to connected components. Elastomeric couplings are also capable of dampening transient vibrations caused by sudden torque fluctuations or shock loads.

However, it is important to note that while elastomeric couplings can handle moderate misalignments, they have their limitations. Large misalignments beyond their design capabilities may lead to premature wear and reduced coupling life. In such cases, special designs or alternative coupling types may be more suitable.

Overall, elastomeric couplings are a popular choice in many industrial applications due to their ability to effectively handle misalignment, providing reliable and smooth power transmission while protecting machinery from excessive stresses and vibrations.

China Best Sales CHINAMFG Couplings Highly Flexible Jaw Torsionally Rigid Hydrodynamic Railway Backlash-Free Shaft Gear Universal Joint Rigid Coupling N-Eupex Elastomer  China Best Sales CHINAMFG Couplings Highly Flexible Jaw Torsionally Rigid Hydrodynamic Railway Backlash-Free Shaft Gear Universal Joint Rigid Coupling N-Eupex Elastomer
editor by CX 2024-01-25

China Best Sales WGP Drum Gear Flexible Coupling with Brake Disc for Heavy Industrial Equipment

Product Description

WGP Drum Gear Flexible Coupling With Brake Disc For Heavy Industrial Equipment

Description:
WGP Drum Gear Coupling With Brake Disc has a brake disc, brake disc can rotate speed by controlling the speed to adjust the machine. As shown in figure WGP with brake drum set type gear coupling is divided into I type and II type 2 forms, the only difference is that the brake disc is different.
WGP Drum Gear Coupling With Brake Disc is an improved type of gear coupling, consisting of inner gear and the same number of teeth of the flange half band coupling parts etc..
WGP Drum Gear Coupling With Brake Disc at work, 2 have the relative angular displacement, relative axial sliding periodic internal and external gear tooth surface, will inevitably lead to tooth wear and power consumption, therefore, the gear coupling needs to work in good condition and seal. The toothed coupling has small radial size and large load capacity. It is usually used for shafting transmission under low speed and heavy load conditions. The high accuracy and dynamic balancing gear coupling can be used for high speed transmission.

 

Features:

1. Double drum-shaped tooth structure, can compensate for a larger axis offset,

2. The brake disc is arranged at the passive end of the coupling, the weight of the brake disc and the working brake load and vibration are completely supported by the half coupling, thereby improving the meshing performance of the drum teeth during braking,

3. The maximum braking torque is not restricted by the structural strength of the coupling, safe and reliable,

4. Compact structure, brake disc cooling conditions are good,

5. Plug-in brake disc can be quickly be replaced without removing the device.

Applications:
Metallurgy, mining, lifting and transportation industries, petroleum, chemical, general machinery and other heavy machinery shaft drive.

Packing & shipping:
1 Prevent from damage.
2. As customers’ requirements, in perfect condition.
3. Delivery : As per contract delivery on time
4. Shipping : As per client request. We can accept CIF, Door to Door etc. or client authorized agent we supply all the necessary assistant.

FAQ:
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks in PDF or AI format.

Q 3:How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 5: Do you have inspection procedures for coupling?
A:100% self-inspection before packing.

Q 6: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

disc coupling

Industry Standards and Guidelines for Disc Couplings

Disc couplings, like other mechanical components, are subject to various industry standards and guidelines that ensure their safe and reliable operation. Some relevant standards include:

  • API Standard 671: This American Petroleum Institute (API) standard provides guidelines for special-purpose couplings for use in petroleum, chemical, and gas industry services. It covers the design, materials, testing, and inspection of couplings, including disc couplings.
  • AGMA Standard 9001: The American Gear Manufacturers Association (AGMA) standard 9001 addresses flexible couplings, including disc couplings, and provides recommendations for their design, installation, and maintenance.
  • ISO 14691: This International Organization for Standardization (ISO) standard covers general-purpose industrial couplings, including disc couplings, and provides guidance on their selection, installation, and operation.

Manufacturers and engineers often refer to these standards and guidelines to ensure that disc couplings are designed, manufactured, and used according to recognized industry practices. Adhering to these standards helps enhance the reliability, safety, and performance of disc couplings in various industrial applications.

disc coupling

Suitability of Disc Couplings for High-Speed Rotation and Critical Alignment

Disc couplings are well-suited for applications involving high-speed rotation and critical alignment due to their unique design and performance characteristics:

  • High-Speed Rotation: Disc couplings can handle high rotational speeds while maintaining their balance and integrity. Their lightweight and compact design minimize the effects of centrifugal forces, making them suitable for high-speed applications.
  • Critical Alignment: Disc couplings offer excellent flexibility and angular misalignment compensation. They can accommodate axial, radial, and angular misalignments, making them suitable for applications where maintaining precise alignment is crucial.
  • Torsional Stiffness: Disc couplings can provide a balance between flexibility and torsional stiffness, allowing them to transmit torque accurately even in critical alignment scenarios.
  • High Torque Capacity: Many disc couplings are designed to handle high torque loads, making them suitable for applications with demanding torque requirements.
  • Resonance Damping: The flexible nature of disc couplings can help dampen vibrations and reduce the risk of resonance, which is important in high-speed applications.

When selecting a disc coupling for high-speed rotation and critical alignment, it’s essential to consider factors such as torque requirements, speed range, misalignment compensation, space limitations, and dynamic behavior to ensure optimal performance and reliability in the specific application.

disc coupling

Disc Couplings: Function and Application in Mechanical Systems

A disc coupling is a type of flexible coupling used in mechanical systems to connect two shafts while allowing for angular misalignment, axial movement, and some degree of torsional flexibility. It consists of two hubs with flexible metallic discs, known as diaphragms, positioned between them.

Disc couplings are commonly utilized in various industrial applications where precise power transmission, reliability, and flexibility are essential. Some key features and applications of disc couplings include:

  • High Torque Transmission: Disc couplings are designed to transmit high torque loads between shafts while maintaining shaft alignment. The flexible diaphragms can accommodate misalignments and prevent torque overloads on connected equipment.
  • Angular Misalignment Compensation: The design of disc couplings allows them to handle angular misalignment between shafts, which can occur due to manufacturing tolerances or dynamic conditions.
  • Axial Movement Absorption: Disc couplings can absorb limited axial movement along the shaft axis without transferring excessive forces to the connected components.
  • Torsional Flexibility: The metallic diaphragms of disc couplings offer torsional flexibility, enabling them to dampen vibrations and shock loads. This helps protect connected equipment from damage and increases overall system reliability.
  • Precision Machinery: Disc couplings are often employed in precision machinery and equipment, such as CNC machines, robotics, pumps, compressors, and servo systems. These applications require accurate motion control and reliable power transmission.
  • High-Speed Applications: Due to their balanced design and ability to maintain precise alignment, disc couplings are suitable for high-speed applications where even a small misalignment can lead to vibration and wear.

The ability of disc couplings to provide both flexibility and precise torque transmission makes them a preferred choice in various industries, including manufacturing, aerospace, automotive, and more. Proper selection, installation, and maintenance of disc couplings contribute to improved machinery performance, reduced downtime, and extended component life.

China Best Sales WGP Drum Gear Flexible Coupling with Brake Disc for Heavy Industrial Equipment  China Best Sales WGP Drum Gear Flexible Coupling with Brake Disc for Heavy Industrial Equipment
editor by CX 2024-01-16

China Best Sales China High Quality Wgp Type Drum Tooth Gear Coupling with Brake Disc

Product Description

China High quality WGP Type Drum Tooth Gear Coupling with Brake Disc

Description:
WGP Drum Gear Coupling With Brake Disc has a brake disc, brake disc can rotate speed by controlling the speed to adjust the machine. As shown in figure WGP with brake drum set type gear coupling is divided into I type and II type 2 forms, the only difference is that the brake disc is different.

Characteristics:

1. Strong load-bearing capacity. Under the same outer diameter of the inner gear sleeve and the maximum outer diameter of the coupling, the bearing capacity of the drum gear coupling is increased by an average of 15-20% compared to the straight gear coupling;
2. The angular displacement compensation is large. When the radial displacement is equal to zero, the allowable angular
displacement of the straight tooth coupling is 1o, while the allowable angular displacement of the drum tooth coupling is 1o30 ‘, an increase of 50%. Under the same modulus, number of teeth, and tooth width, the allowable angular displacement of drum shaped teeth is greater than that of straight teeth;
3. The drum shaped tooth surface improves the contact conditions between the inner and outer teeth, avoiding the drawbacks of extrusion and stress concentration at the edge of straight teeth under angular displacement conditions. At the same time, it improves the friction and wear conditions of the tooth surface, reduces noise, and has a long maintenance cycle;
4. The outer gear sleeve has a CHINAMFG shaped tooth end, making it very convenient to assemble and disassemble the inner and outer teeth;
5. Transmission efficiency up to 99.7%; 
Based on the above characteristics, drum shaped teeth have been widely used domestically and internationally to replace straight tooth couplings.

Paramaters:

Packing & shipping:
1 Prevent from damage.
2. As customers’ requirements, in perfect condition.
3. Delivery : As per contract delivery on time
4. Shipping : As per client request. We can accept CIF, Door to Door etc. or client authorized agent we supply all the necessary assistant.

FAQ:
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks in PDF or AI format.

Q 3:How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 5: Do you have inspection procedures for coupling?
A:100% self-inspection before packing.

Q 6: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.
  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

disc coupling

Common Applications of Disc Couplings

Disc couplings find extensive use across various industries and applications where reliable torque transmission, misalignment compensation, and torsional stiffness are essential. Some notable examples include:

  • Industrial Machinery: Disc couplings are employed in industrial equipment such as pumps, compressors, generators, and conveyors. They ensure precise torque transfer and alignment in heavy-duty machinery.
  • Power Generation: Gas turbines, steam turbines, and power generators often utilize disc couplings to transmit torque between components while withstanding high rotational speeds.
  • Aerospace: In aircraft and spacecraft, disc couplings help connect critical systems like engines and auxiliary power units, ensuring dependable torque transmission in demanding environments.
  • Marine: Ships and offshore platforms use disc couplings to connect propulsion systems, generators, and other machinery, even in conditions with variable loads and misalignments.
  • Oil and Gas: Disc couplings play a crucial role in drilling rigs, pumps, and other equipment where reliable torque transmission and misalignment compensation are vital.
  • Automotive: Some automotive applications use disc couplings to connect components within drivetrains and transmissions, especially in vehicles with high-performance requirements.

These examples highlight the versatility and importance of disc couplings in various industries where precise torque transmission, misalignment handling, and torsional stiffness are critical for optimal performance.

disc coupling

Impact of Number and Configuration of Disc Packs on Coupling Performance

The number and configuration of disc packs in a disc coupling have a significant impact on its overall performance. Here’s how:

  • Number of Disc Packs: Increasing the number of disc packs can enhance the coupling’s torque capacity and stiffness. This allows it to handle higher levels of torque while maintaining its flexibility to accommodate misalignment.
  • Configuration: Different configurations, such as single-flex, double-flex, or multiple-flex, offer varying degrees of angular misalignment compensation and torsional stiffness. Single-flex configurations provide greater misalignment capacity, while double-flex configurations offer improved torsional stiffness.

Choosing the appropriate number and configuration of disc packs depends on the specific application requirements:

  • Torque Transmission: Applications with high torque demands may benefit from a higher number of disc packs to ensure reliable torque transmission.
  • Misalignment Compensation: Applications with moderate misalignment may opt for configurations that offer higher angular misalignment compensation.
  • Torsional Stiffness: For applications where torsional stiffness is critical, a configuration with multiple-disc packs may be preferred.
  • Space Limitations: Consider the available space and coupling dimensions when choosing the number and configuration of disc packs.
  • Dynamic Behavior: Depending on the application’s dynamic behavior and vibration characteristics, the appropriate configuration can be selected to minimize resonances.

Ultimately, the selection of the number and configuration of disc packs in a disc coupling should be based on a thorough understanding of the application’s torque, misalignment, and stiffness requirements to optimize coupling performance and reliability.

disc coupling

Key Benefits and Applications of Disc Couplings

Disc couplings offer several key benefits that make them suitable for a wide range of applications in mechanical systems. These benefits, along with their diverse applications, are highlighted below:

  • High Torque Transmission: Disc couplings are capable of transmitting high levels of torque between shafts, making them suitable for heavy-duty machinery and equipment.
  • Angular Misalignment Compensation: They can accommodate angular misalignment between shafts, ensuring smooth operation even when there are slight deviations in alignment.
  • Axial Movement Absorption: Disc couplings can absorb limited axial movement along the shaft axis, preventing excessive forces from affecting connected components.
  • Torsional Flexibility: The torsional flexibility of disc couplings allows them to dampen vibrations, shock loads, and torsional disturbances, enhancing the reliability and longevity of machinery.
  • Reduced Maintenance: By reducing the transmission of vibration and shock, disc couplings can minimize wear and tear on connected equipment, resulting in lower maintenance requirements.
  • High-Speed Applications: Their balanced design and ability to maintain alignment make disc couplings suitable for high-speed applications where precision and reliability are crucial.
  • Precision Machinery: Disc couplings find applications in precision machinery such as CNC machines, robotics, and servo systems, where accurate motion control is essential.
  • Industrial Machinery: They are commonly used in industrial machinery like pumps, compressors, conveyors, and generators to ensure efficient power transmission and reliable operation.
  • Aerospace and Automotive: Disc couplings are utilized in aerospace and automotive applications where lightweight and reliable couplings are required for critical functions.

The versatility of disc couplings, along with their ability to provide torque transmission, misalignment compensation, and vibration dampening, makes them a preferred choice in various industries. Properly selecting and maintaining disc couplings can enhance machinery performance, reduce downtime, and contribute to overall operational efficiency.

China Best Sales China High Quality Wgp Type Drum Tooth Gear Coupling with Brake Disc  China Best Sales China High Quality Wgp Type Drum Tooth Gear Coupling with Brake Disc
editor by CX 2024-01-12

China Best Sales Giicl Type Cast Steel Curved Tooth CNC Customizable Forged Steel Flexible Jaw Drive Shaft Pipe Connector Drum Gear Coupling gear coupling

Product Description

GIICL type Cast Steel Curved Tooth flexible drive shaft pipe connector Drum Gear Coupling 

 

This shaft coupling is applicable to connecting 2 horizontal line shafting of coaxial line It has a drumshaped teeth shaft coupling with angular orientation compensation on relative deviation of 2 shafts.Temperature of the operating environment is:-20 ~ +80C.The nominal transmitting torque is0.4-4500KN*m.

Gear Couplings
Features:
Improve the starting capability of electric motor, protect motor against overloading, damp shock, load fluctuation and torsional vibration, and balance and load distribution in case of multimotor drives.

Applications:

Belt conveyers, csraper conveyers, and conveyers of all kinds Bucket elevators, ball mills, hoisters, crushers, excavators, mixers, straighteners, cranes, etc.
We can just upload very limited information about our couplings products here, for more info, please do not hesitate to wrtie to us for catalog and related technic info….

 

 

A coupling can interchange and replacement with lovejoy coupling is a device used to connect 2 shafts together at their ends for the purpose of transmitting power. The primary purpose of couplings is to join 2 pieces of rotating equipment while permitting some degree of misalignment or end movement or both. In a more general context, a coupling can also be a mechanical device that serves to connect the ends of adjacent parts or objects. Couplings do not normally allow disconnection of shafts during operation, however there are torque limiting couplings which can slip or disconnect when some torque limit is exceeded. Selection, installation and maintenance of couplings can lead to reduced maintenance time and maintenance cost.

 

Our Company

Ever-power Group specialist in making all kinds of mechanical transmission and hydraulic transmission like: planetary gearboxes, worm reducers, in-line helical gear speed reducers, parallel shaft helical gear reducers, helical bevel reducers, helical worm gear reducers, agricultural gearboxes, tractor gearboxes, auto gearboxes, pto shafts, special reducer & related gear components and other related products, sprockets, hydraulic system, vacuum pumps, fluid coupling, gear racks, chains, timing pulleys, udl speed variators, v pulleys, hydraulic cylinder, gear pumps, screw air compressors, shaft collars low backlash worm reducers and so on. furthermore, we can produce customized variators, geared motors, electric motors and other hydraulic products according to customers’ drawings.
We provides a reliable grantee for the product’ s quality by advanced inspection and testing equipment. professional technical team, exquisite processing technology and strict control system. 
In recent years, the company has been developing rapidly by its rich experience in production, advanced management system, standardized management system, strong technical force. We always adhere the concept of survival by quality, and development by innovation in science and technology. 
Our Group is willing to work with you hand in hand and create brilliance together! 

Material available
Low carbon steel, C45, 20CrMnTi, 42CrMo, 40Cr, stainless steel. Can be adapted regarding customer requirements.

Surface treatment
Blacking, galvanization, chroming, electrophoresis, color painting, …

Heat treatment
High frequency quenching heat treatment, hardened teeth, carbonizing, nitride, …
 

Certifications

FAQ:

Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shippment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.

If you have another question, please feel free to contact us.

Packing & Delivery

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flange coupling

Materials Used in Manufacturing Gear Couplings

Gear couplings are designed to transmit torque between shafts while accommodating misalignment. To ensure the durability and reliability of gear couplings, manufacturers use a variety of materials, each with its specific properties. Commonly used materials in manufacturing gear couplings include:

  • Steel: Steel is the most widely used material for gear couplings. It offers excellent strength, durability, and resistance to wear and fatigue. Steel gear couplings are suitable for a wide range of applications, including heavy-duty industrial machinery.
  • Stainless Steel: Stainless steel is chosen for gear couplings that require resistance to corrosion and high-temperature environments. Stainless steel couplings are commonly used in food processing, pharmaceutical, and chemical industries.
  • Alloy Steel: Alloy steel is utilized to enhance specific properties, such as increased strength and improved performance under high loads and extreme conditions. Alloy steel gear couplings are ideal for demanding applications in heavy industries.
  • Cast Iron: Cast iron is known for its excellent machinability and good resistance to wear. Cast iron gear couplings are suitable for low to moderate torque applications and can be cost-effective in certain scenarios.
  • Non-Metallic Materials: In some cases, non-metallic materials like nylon or urethane may be used for specific gear coupling applications, especially in situations where electrical isolation or chemical resistance is required.

The choice of material depends on the application’s demands, including the torque, speed, environmental conditions, and budget considerations. Gear coupling manufacturers carefully select materials that will provide optimal performance and longevity while meeting the specific requirements of the intended application.

China Best Sales Giicl Type Cast Steel Curved Tooth CNC Customizable Forged Steel Flexible Jaw Drive Shaft Pipe Connector Drum Gear Coupling  gear couplingChina Best Sales Giicl Type Cast Steel Curved Tooth CNC Customizable Forged Steel Flexible Jaw Drive Shaft Pipe Connector Drum Gear Coupling  gear coupling
editor by CX 2024-01-12

China best Custom Precision Machining Fabrication Machinery Parts Core Air Shaft Gear Pin Coupling gear coupling

Product Description

HangZhou CHINAMFG Precision Industry Co.,Ltd

 

The company has owned IS0 9001 (International Quality Management) system certification, ISO14001 (International Environmental Management) system certification, IATF16949 (International Automotive Task Force) system certification and EN15085-2 (Railway applications-Welding of railway vehicles and components) system certification. We have an experienced management team and a group of high-quality talents. 

 

Our advantages are as below.

  1. Core Value: Integrity + Quality;
  2. Rich Experience: Since the year of 2001;
  3. Technical Engineer: 36 Staffs;
  4. Quality Engineer: 18 Staffs;
  5. Company Certificate: ISO 9001, ISO14001, ITAF 16949, EN 15085-2;
  6. Strong Capacity: Up to 100k pieces per day;

 

Factory Description and Service Content
PRODUCTION LINE:  Metal stamping, Laser cutting, Sheet metal, Welding, Spraying, Electrophoresis, Assembly.
MATERIAL:  Carbon steel, Stainless steel, Aluminum, Copper, Brass, Bronze, Customized.
PROCEDURES:  Blanking, Punching, Bending, Cutting, Milling, Dilling, Tapping, Riveting, Welding, Assembling, Packing.
TOLERANCE:  +/- 0.01mm
FINISH:  Powder, Spraying, Sand Blasting, Electroplating, Electrophoresis, Anodizing, Passivating, Customized.
COLOR:  Natural, Conversonial, Silver, Grey, Black, White, Red, Blue, Green, Yellow, Matte, Glossy, Customized.
SYSTEM CERTIFICATION:  ISO 9001, ISO 14001, ITAF 16949, EN 15085-2.
APPLICATION:  Automobile, Communication, Electrical, Electronics, Rail transit, Equipment manufacturing etc.
MOQ:  1,000 Pcs ~ 5,000 Pcs
MOULD COST:  500 USD ~ 5,000 USD
UNIT PRICE:  0.05 USD ~ 5.00 USD
PACKING:  Paper Bag, Plastic Bag, PE Bag, Carton Board, Carton Box, Plywood case, Wooden Case, Pallet.
MPQ:  50 Pcs ~ 200 Pcs
LEAD TIME:  15 Work Days ~ 25 Work Days
TRADE TERM:  EXW, FOB, CFR, CIF, DDU, DDP.
PAYMENT METHOD:  T/T, L/C, Western Union, Money Gram, PayPal, Ali Pay.

 

Workshop Inner View

System Certificate

 

Production Line View 

Metalworking products are very important component in industrial field, It is widely accepted for its stable performance and affordable price.
Especially in the field of Automobile, Communication, Electrical, Electronics, IT, Equipment Manufacturing, Rail Transit and Construction etc.

We committed to provide our customers with excellent products and cater to their demand solutions with lower costs and highly efficiency. Please feel free to contact us, we are looking CHINAMFG to our further cooperation. We treat every customer sincerely and take every project seriously.

 

 

FAQ:

1. Why business with CHINAMFG Precision Co., Ltd?
Our mission is to provide unparalleled product quality with very best prices for customer to be more competitive in their market, and to enhance their business growth.

2. Are the products available for selling from your Product Display Area?
All Products displayed were made before for other customers with their copy right. We only supply parts according to customer’s specific requirements or with samples offered other than prompt goods.

3. How to get your quotation?
Please provide your 2D / 3D drawings to us to evaluate for our exclusive price. All Products are manufactured to custom requirements and specifications.

4. What’s your production leadtime?
The delivery time is usually 15 ~ 25 days, but the actually time needs to be determined according to the drawings / samples provided.

5. How to guarantee the products quality?
We are ISO certified and will comply any quality level requirement for specific items. Additionally, our in-house team inspect and test random samples prior to shipment. Quality certification is available CHINAMFG request to our customers.

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flange coupling

Maintenance Requirements for Gear Couplings

Gear couplings, like any mechanical component, require regular maintenance to ensure optimal performance, reliability, and longevity. Proper maintenance can help prevent unexpected failures and downtime, leading to cost savings and increased productivity. Here are the key maintenance requirements for gear couplings:

  • Lubrication: Regular and proper lubrication is essential for gear couplings. The coupling’s gear teeth and mating surfaces should be adequately lubricated to minimize friction and wear. The lubrication interval and type of lubricant used depend on the application, load, and operating conditions. It is crucial to follow the manufacturer’s recommendations for lubrication intervals and the appropriate lubricant to use.
  • Inspections: Routine inspections should be performed to check for signs of wear, misalignment, or damage. Visual inspections can help detect any abnormalities, such as pitting, scoring, or corrosion on the gear teeth. Additionally, inspections can identify any misalignment issues that may need to be addressed to prevent further damage.
  • Torque Monitoring: Monitoring the torque transmitted through the coupling can help identify any abnormal increases that might indicate a problem in the system. Sudden changes in torque levels could signal misalignment or other issues that need attention.
  • Alignment Checks: Regularly checking and correcting shaft alignment is crucial for the proper functioning of gear couplings. Misalignment can lead to increased wear and premature failure of the coupling. Proper alignment reduces the stress on the coupling and connected equipment.
  • Temperature Monitoring: Monitoring the operating temperature of the coupling can provide insights into potential problems. Abnormally high temperatures could indicate insufficient lubrication or other issues that need investigation.
  • Coupling Removal and Cleaning: Periodically removing the coupling for cleaning and inspection of internal components can be beneficial, especially in harsh or dirty environments. This allows for a more thorough inspection and helps maintain the coupling’s performance.
  • Replacement of Worn Components: If any components of the gear coupling, such as seals or gaskets, are worn or damaged, they should be replaced promptly to maintain the coupling’s integrity and prevent leaks.
  • Proper Storage: If the coupling is temporarily removed from service or stored, it should be stored in a clean and dry environment to prevent corrosion and damage to the components.

It is essential to follow the manufacturer’s maintenance guidelines and recommendations for the specific gear coupling model being used. Regular maintenance and adherence to proper procedures can help extend the service life of gear couplings and ensure reliable and efficient operation in the mechanical system.

China best Custom Precision Machining Fabrication Machinery Parts Core Air Shaft Gear Pin Coupling  gear couplingChina best Custom Precision Machining Fabrication Machinery Parts Core Air Shaft Gear Pin Coupling  gear coupling
editor by CX 2023-12-25