Tag Archives: mechanical coupling

China wholesaler Mechanical Coupling Shaft Elastomeric Stainless Steel Clamp Industrial Servo Flange Flexible Square Shaft Industrial Hydraulic Fluid Drive Roller Chain Spider

Product Description

Mechanical Coupling Shaft Elastomeric Stainless Steel Clamp Industrial Servo Flange Flexible Square Shaft Industrial Hydraulic Fluid Drive Roller Chain Spider

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

elastomeric coupling

Elastomeric Couplings and Handling Torque Spikes and Sudden Load Changes

Elastomeric couplings are designed to handle torque spikes and sudden changes in load, thanks to the inherent flexibility and damping properties of the elastomeric material. Here’s how they manage such scenarios:

1. Damping Effect:

When a sudden increase in torque or load occurs in the machinery, the elastomeric coupling’s flexible element acts as a buffer, absorbing and dissipating the excess energy. This damping effect helps prevent the transmission of shock loads to the connected equipment, reducing the risk of damage.

2. Torsional Compliance:

Elastomeric couplings have a certain level of torsional compliance, which allows them to tolerate brief torque spikes without transmitting excessive forces to the connected shafts. This torsional compliance is essential in applications where sudden load changes are common.

3. Misalignment Compensation:

Elastomeric couplings can accommodate some degree of misalignment between the shafts. When torque spikes or sudden loads lead to minor misalignments, the coupling can flex and compensate for these changes, reducing the stress on the machinery.

4. Vibration Absorption:

If torque spikes or sudden loads result in torsional vibrations, the elastomeric material can absorb and dampen these vibrations, preventing them from propagating through the system and causing additional damage.

5. Material Selection:

The selection of appropriate elastomeric materials and coupling design factors in the anticipated torque and load requirements. Couplings can be designed to handle specific torque spikes and loads based on the elastomer’s hardness and properties.

Despite their ability to handle torque spikes and sudden load changes, it is essential to consider the specific application requirements when choosing an elastomeric coupling. Factors such as the magnitude and frequency of torque spikes, load characteristics, and operating conditions must be taken into account to ensure the coupling’s compatibility and reliability.

Properly selected and maintained elastomeric couplings provide effective torque transmission and help protect connected equipment from the impact of sudden changes in load, contributing to the overall efficiency and longevity of the machinery.

elastomeric coupling

Safety Considerations When Using Elastomeric Couplings in High-Speed or Heavy-Load Applications

When using elastomeric couplings in high-speed or heavy-load applications, there are several important safety considerations to ensure reliable and safe operation. These considerations help prevent potential hazards and mitigate risks associated with the coupling’s performance under demanding conditions:

1. Coupling Selection:

Choose an elastomeric coupling specifically designed and rated for high-speed and heavy-load applications. Ensure the coupling’s torque and speed ratings exceed the maximum requirements of your application to prevent overloading.

2. Dynamic Balancing:

For high-speed applications, ensure that the coupling and the connected equipment are dynamically balanced. Imbalances can lead to significant vibrations, which may cause premature wear, fatigue, and ultimately failure of the coupling or connected machinery.

3. Misalignment Limits:

Monitor and control misalignment between shafts within the coupling’s allowable limits. Excessive misalignment can cause additional stresses on the elastomeric material and reduce coupling life.

4. Temperature Monitoring:

Monitor the operating temperature of the coupling, especially during high-speed or high-load operations. Elevated temperatures can accelerate elastomer degradation and affect the coupling’s flexibility and damping characteristics.

5. Regular Inspection:

Perform regular visual inspections of the coupling to check for signs of wear, damage, or misalignment. Promptly address any issues to prevent potential safety risks.

6. Avoid Shock Loads:

Avoid subjecting the coupling to sudden shock loads, especially in high-load applications. Sudden shock loads can lead to excessive stress on the elastomer, causing it to fail prematurely.

7. Load Capacity:

Ensure that the coupling’s load capacity matches or exceeds the maximum loads expected in the application. Operating the coupling near its maximum capacity for prolonged periods may decrease its lifespan.

8. Installation Quality:

Ensure that the elastomeric coupling is installed correctly following the manufacturer’s guidelines. Proper installation prevents misalignment and ensures the coupling can handle the anticipated loads and speeds safely.

By carefully considering these safety measures and adhering to manufacturer recommendations, you can use elastomeric couplings effectively and safely in high-speed or heavy-load applications. Regular maintenance, monitoring, and adherence to safety guidelines will help prevent accidents, minimize downtime, and ensure the longevity and reliability of your coupling system.

elastomeric coupling

Maintenance Requirements for Elastomeric Couplings to Ensure Optimal Performance and Longevity

Elastomeric couplings are known for their relatively low maintenance requirements, but regular inspection and care are essential to ensure their optimal performance and longevity. Here are the key maintenance practices for elastomeric couplings:

1. Visual Inspection:

Regularly inspect the coupling for signs of wear, damage, or misalignment. Look for cracks, tears, or deformations in the elastomeric element and any visible signs of deterioration.

2. Lubrication:

Most elastomeric couplings do not require lubrication, as the elastomeric material acts as a self-lubricating element. However, check with the manufacturer’s recommendations to ensure your specific coupling type does not require any lubrication.

3. Misalignment Check:

Monitor the misalignment between the connected shafts to ensure it stays within the coupling’s allowable limits. Excessive misalignment can lead to premature wear and reduced coupling life.

4. Temperature Limits:

Keep the operating temperature within the specified limits for the elastomeric material. Extreme temperatures can degrade the elastomer and affect its flexibility and performance.

5. Environmental Protection:

Protect the coupling from exposure to chemicals, abrasive particles, and other harsh environmental elements that may accelerate wear and deterioration of the elastomeric material.

6. Regular Maintenance Schedule:

Follow a maintenance schedule recommended by the manufacturer or based on the specific operating conditions of your application. Regularly inspect and replace elastomeric couplings as needed to prevent unexpected failures.

7. Proper Installation:

Ensure the coupling is correctly installed following the manufacturer’s guidelines. Proper installation helps maintain the coupling’s alignment and prevents undue stresses on the elastomeric element.

8. Load Monitoring:

Regularly monitor the load and torque requirements of your application. Avoid overloading the coupling beyond its specified capacity, as this can lead to premature failure.

By following these maintenance practices, you can extend the life of your elastomeric couplings and ensure they continue to provide reliable and efficient power transmission in your industrial system. Remember that each application may have specific maintenance needs, so always refer to the manufacturer’s instructions and consult with experts if needed.

China wholesaler Mechanical Coupling Shaft Elastomeric Stainless Steel Clamp Industrial Servo Flange Flexible Square Shaft Industrial Hydraulic Fluid Drive Roller Chain Spider  China wholesaler Mechanical Coupling Shaft Elastomeric Stainless Steel Clamp Industrial Servo Flange Flexible Square Shaft Industrial Hydraulic Fluid Drive Roller Chain Spider
editor by CX 2024-02-19

China manufacturer CHINAMFG Jmi Type Disc Diaphragm Coupling Turbines Piston Power Mechanical Transmission

Product Description

JMI Type Disc Diaphragm Coupling(JB/T9147-1999)

♦Description
JM Series Diaphragm Coupling of flexible metal flexible coupling, which relies on the metal diaphragm to transmit torque from the main connection, motivation, has the advantages of elastic damping and no lubrication, no noise, is an ideal product for replacing the gear coupling and coupling current. It can compensate for the axial, radial, and angular deviation caused by the manufacturing error, installation error, bearing deformation, and the change in temperature rise.

The main characteristics of JM Series Diaphragm Coupling:
1. Compensation two-axis misalignment of the ability, and tooth type coupling can be much more than a double angle displacement, radial displacement of the small, flexible, allowing a certain axial, radial, and angular displacement.
2. Obvious damping effect, no noise, no wear, and tear.
3. High transmission efficiency, up to 99.86%. Especially suitable for medium and high-speed high-power transmission.
4. Adapt to high temperature (-80+300) and harsh environments, and can be in shock, vibration, safety, and dynamic conditions.
5. Simple structure, lightweight, small size, convenient assembly, and disassembly. Without moving the machine can be disassembled (with intermediate type), with no need for lubrication.
6. Accurately convey the rotational speed, the operation has not turned bad, can be used for the transmission of precision machinery.

JM series diaphragm flexible coupling is widely used in the machinery and equipment industry, metallurgy, mines, petroleum, chemical, electric power, shipbuilding, lifting transport, textile, light industry, agricultural machinery, printing machinery, and water pump, fan, etc. in the transmission of power machine.

♦Detailed Pictures

♦Basic Parameter and Main Dimension

NO  Tn 
  /N·m
Tmax 
/N·m
 
 [n] 
/r·mi -1
    d 
(H7)
  D  

N·m/rad
t  
 

kg·m 2 
 

/kg 
Y J,J1, 
Z
L
L L L1
JMI1 25 80 6000 14 32 J1  27 Z1 20 35 90 1×10 4 8.8 0.0007 1
16,18,19 42 30
20,22 52 38
JMI2 63 180 5000 18,19 42 30 45 100 1.4×10 4 9.5 0.001 1.3
20,22,24 52 38
25 62 44
JMI3 100 315 5000 20,22,24 52 38 50 120 1.87×10 4 11 0.0571 2.3
25,28 62 44
30 82 60
JMI4 160 500 4500 24 52 38 55 130 3.12×10 4 12.5 0.0037 3.3
25,28 62 44
30,32,35 82 60
JMI5 250 710 4000 28 62 44 60 150 4.32×10 4 14 0.0083 5.3
30,32,35,38 82 60
40 112 84
JMI6 400 1120 3600 32,35,38 82 82 60 65 170 6.88×10 4 15.5 0.0159 8.7
40,42,45 
,48,50
112 84
JMI7 630 1800 3000 40,42 112 112 84 70 210 10.35×10 4 19 0.571 14.3
45,45,50 
,55,56
60 142 107
JMI8 1000 2500 2800 45,48 112 112 84 80 240 16.11×10 4 22.5 0. 0571 22
50,55,56
60,63,65,70 142 107
JMI9 1600 4000 2500 55,56 112 112 84 85 260 26.17×10 4 24 0.1415 29
60,63,65 
,70,71,75
142 107
80 172 132
JMI10 2500 6300 2000 63,65,70 
,71,75
142 142 107 90 280 7.88×10 4 17 0.2974 52
80,85,90,95 172 132
JMI11 4000 9000 1800 75 142 142 107 95 300 10.49×10 4 19.5 0.4782 69
80,85,90,95 172 132
100,110 212 167
JMI12 6300 12500 1600 90,95 172 132 120 340 14.07×10 4 23 0.8067 94
100,110 
,120 ,125
212 167
JMI13 10000 18000 1400 100,110 
,120,125
212 167 135 380 19.23×10 4 28 1.7053 128
130,140 252 202
JMI14 16000 28000 1200 120,125 212 167 150 420 30.01×10 4 31 2.6832 184
130,140,150 252 202
160 302 242
JMI15 25000 40000 1120 140,150 252 202 180 480 47.46×10 4 37.5 4.8015 263
160,170,180 302 242
JMI16 40000 56000 1000 160,170,180 302 242 200 560 68.09×10 4 41 9.4118 384
190,200 352 282
JMI17 63000 80000 900 190,200,220 352 282 220 630 101.3×10 4 47 18.3753 561
240 410 330
JMI18 100000 125000 800 220 352 282 250 710 161.4×10 4 54.5 28.2033 723
240,250,260 410 330
JMI19 160000 200000 700 250,260 410 330 280 800 79.3×10 4 48 66.5813 1267
280,300,320 470 380

♦Other Products List

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

♦Our Company

HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. 

 

♦Our Services
1. Design Services
Our design team has experience in Cardan shafts relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2. Product Services
Raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly → Packing→ Shipping

3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4. Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5. Quality Control
Every step should be a special test by Professional Staff according to the standard of ISO9001 and TS16949.

♦FAQ
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of couplings.

Q 2: Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks in PDF or AI format.

Q 3: How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have a very good price principle, when you make the bulk order the cost of the sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 6: What is the MOQ?
A: Usually our MOQ is 1 pcs.

Q 7: Do you have inspection procedures for coupling?
A: 100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 9: What’s your payment?
A: T/T.  

♦Contact Us

Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

disc coupling

Materials Used in Manufacturing Disc Couplings

Disc couplings are typically constructed using a combination of high-quality materials that contribute to their durability, strength, and performance. Some commonly used materials include:

  • Stainless Steel: Stainless steel is a popular choice due to its corrosion resistance and high strength-to-weight ratio. It ensures longevity and can withstand harsh environments.
  • Aluminum: Aluminum is known for its lightweight properties and is often used in applications where weight reduction is essential while maintaining reasonable strength.
  • Steel: Carbon or alloy steel is chosen for its robustness and ability to handle high torque loads and harsh operating conditions.
  • Bronze or Brass: These materials can be used in specific applications where electrical conductivity is a concern, or when friction and wear properties are important.

The selection of materials depends on factors such as the coupling’s intended application, torque requirements, environmental conditions, and the desired balance between strength, weight, and resistance to wear and corrosion.

disc coupling

Recent Advancements in Disc Coupling Design

Disc coupling technology has seen continuous advancements to enhance performance, reliability, and adaptability to various applications. Some recent innovations in disc coupling design include:

  • Material Enhancements: The development of new materials, such as advanced alloys and composite materials, has improved coupling durability, corrosion resistance, and overall lifespan.
  • Flexible Disc Profiles: Innovative disc profiles are designed to optimize flexibility while maintaining torque transmission capabilities, allowing for better misalignment compensation and shock absorption.
  • Modular Designs: Modular disc coupling systems offer flexibility in adapting to different torque and misalignment requirements, making them versatile for a wide range of applications.
  • Enhanced Torsional Stiffness: Some designs focus on achieving higher torsional stiffness, ensuring accurate torque transmission and responsiveness even in demanding conditions.
  • Smart Couplings: Integration of sensor technology enables real-time monitoring of coupling performance, allowing for predictive maintenance and reducing downtime.

These advancements are driven by the increasing demands of modern machinery and the need for higher efficiency, reduced maintenance, and improved overall system performance. Engineers and manufacturers are continually exploring new ways to optimize disc coupling design for a variety of industries and applications.

disc coupling

Challenges and Solutions for Misaligned Disc Couplings

Misalignment in disc couplings can lead to several challenges, but these issues can be effectively addressed using appropriate measures:

  • Reduced Efficiency: Misalignment can cause increased friction and wear, leading to energy losses and reduced coupling efficiency. Regular maintenance and proper alignment can help mitigate this issue.
  • Vibration and Noise: Misalignment often results in vibrations and noise in the machinery. This can impact the overall performance of the system and cause discomfort to operators. Ensuring precise alignment and using vibration-damping solutions can minimize these effects.
  • Premature Wear: Disc couplings experiencing misalignment may wear out prematurely due to uneven loading and stress concentrations. Optimal alignment and using coupling models designed to handle misalignment can extend the coupling’s lifespan.
  • Imbalanced Loads: Misalignment can lead to imbalanced loads on the coupling discs, causing uneven stress distribution. This can lead to fatigue and failure. Using spacer elements between the discs and proper alignment can distribute the loads more evenly.
  • Reduced Accuracy: In applications requiring precision positioning, misaligned disc couplings can result in inaccurate measurements or positioning. Implementing accurate alignment practices and selecting couplings designed for precise applications can mitigate this challenge.
  • Temperature Rise: Misalignment-induced friction generates heat, leading to temperature rise in the coupling and adjacent components. This can potentially affect the material properties and lead to premature wear. Proper alignment and selecting appropriate lubrication can manage temperature rise.

Addressing misalignment challenges involves a combination of careful installation, routine maintenance, alignment checks, and using coupling designs that offer flexibility and resilience to misalignment. Regular monitoring and addressing misalignment issues promptly can help ensure the longevity and optimal performance of disc couplings.

China manufacturer CHINAMFG Jmi Type Disc Diaphragm Coupling Turbines Piston Power Mechanical Transmission  China manufacturer CHINAMFG Jmi Type Disc Diaphragm Coupling Turbines Piston Power Mechanical Transmission
editor by CX 2024-02-18

China Professional FCL 315 Flexible Pin Bush Rubber Mechanical Shear Pump Pin Shaft Coupling with Camlock Flange for Spinning and Weaving Machines

Product Description

FCL 315 Flexible Pin Bush Rubber Mechanical Shear Pump Pin Shaft Coupling with Camlock Flange for Spinning and Weaving Machines

1. The coupling consists of 2 hubs: One pin hub with the corresponding pins and a bush hub.
2. The torque is transmitted via the steel pins with their taper elastomer rings and the corresponding bores
   in the bush hub.
3. They can be assembled with taper bush.
4. The couping is maintenance-free an is used in general engineering and the pump industry.
5. Customized requirement is available.

Related products

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

elastomeric coupling

Real-World Applications and Success Stories of Elastomeric Couplings in Challenging Environments

Elastomeric couplings have demonstrated their effectiveness and reliability in numerous challenging industrial environments. Here are some real-world applications and success stories:

1. Wind Turbines:

Elastomeric couplings are commonly used in wind turbines to connect the gearbox to the generator. The couplings accommodate misalignments caused by wind-induced movements and thermal variations, ensuring efficient power transmission even in harsh wind farm conditions.

2. Steel Mills:

In steel mills, elastomeric couplings are employed in rolling mills and conveyor systems. These couplings dampen vibrations generated during the rolling process, protecting the machinery and reducing maintenance costs.

3. Marine Propulsion:

In marine applications, elastomeric couplings connect the engine to the propeller shaft, accommodating shaft misalignments caused by hull flexing and propeller thrust. The couplings’ shock-absorbing properties protect the drivetrain from sudden load changes and contribute to smooth and efficient propulsion.

4. Mining Equipment:

In mining operations, elastomeric couplings are used in crushers, conveyors, and other equipment. They handle misalignments caused by uneven terrain and reduce shock loads during the crushing and conveying processes, increasing equipment durability and uptime.

5. Chemical Processing:

Elastomeric couplings find application in chemical processing equipment that handles corrosive substances and operates at varying temperatures. The couplings’ resistance to chemicals and ability to accommodate thermal expansion contribute to reliable and efficient performance in these harsh environments.

6. Offshore Oil & Gas Platforms:

In offshore platforms, elastomeric couplings connect pumps, compressors, and generators, allowing them to handle misalignments caused by platform movement and temperature fluctuations. The couplings’ ability to dampen vibrations and absorb shock loads enhances equipment longevity and safety.

7. Power Generation:

In power plants, elastomeric couplings are used in gas turbines, steam turbines, and other power generation equipment. They dampen torsional vibrations and compensate for thermal growth, contributing to efficient power production and reduced maintenance costs.

8. Paper and Pulp Industry:

In paper and pulp mills, elastomeric couplings connect the motors to the rollers and conveyors. The couplings’ flexibility and shock-absorbing properties protect the machinery from sudden load changes, leading to smoother operations and increased productivity.

These real-world success stories showcase how elastomeric couplings excel in challenging environments, delivering reliable and efficient performance across various industries. Their ability to handle misalignments, dampen vibrations, and absorb shocks makes them a valuable component in demanding industrial applications.

elastomeric coupling

Safety Considerations When Using Elastomeric Couplings in High-Speed or Heavy-Load Applications

When using elastomeric couplings in high-speed or heavy-load applications, there are several important safety considerations to ensure reliable and safe operation. These considerations help prevent potential hazards and mitigate risks associated with the coupling’s performance under demanding conditions:

1. Coupling Selection:

Choose an elastomeric coupling specifically designed and rated for high-speed and heavy-load applications. Ensure the coupling’s torque and speed ratings exceed the maximum requirements of your application to prevent overloading.

2. Dynamic Balancing:

For high-speed applications, ensure that the coupling and the connected equipment are dynamically balanced. Imbalances can lead to significant vibrations, which may cause premature wear, fatigue, and ultimately failure of the coupling or connected machinery.

3. Misalignment Limits:

Monitor and control misalignment between shafts within the coupling’s allowable limits. Excessive misalignment can cause additional stresses on the elastomeric material and reduce coupling life.

4. Temperature Monitoring:

Monitor the operating temperature of the coupling, especially during high-speed or high-load operations. Elevated temperatures can accelerate elastomer degradation and affect the coupling’s flexibility and damping characteristics.

5. Regular Inspection:

Perform regular visual inspections of the coupling to check for signs of wear, damage, or misalignment. Promptly address any issues to prevent potential safety risks.

6. Avoid Shock Loads:

Avoid subjecting the coupling to sudden shock loads, especially in high-load applications. Sudden shock loads can lead to excessive stress on the elastomer, causing it to fail prematurely.

7. Load Capacity:

Ensure that the coupling’s load capacity matches or exceeds the maximum loads expected in the application. Operating the coupling near its maximum capacity for prolonged periods may decrease its lifespan.

8. Installation Quality:

Ensure that the elastomeric coupling is installed correctly following the manufacturer’s guidelines. Proper installation prevents misalignment and ensures the coupling can handle the anticipated loads and speeds safely.

By carefully considering these safety measures and adhering to manufacturer recommendations, you can use elastomeric couplings effectively and safely in high-speed or heavy-load applications. Regular maintenance, monitoring, and adherence to safety guidelines will help prevent accidents, minimize downtime, and ensure the longevity and reliability of your coupling system.

elastomeric coupling

Maintenance Requirements for Elastomeric Couplings to Ensure Optimal Performance and Longevity

Elastomeric couplings are known for their relatively low maintenance requirements, but regular inspection and care are essential to ensure their optimal performance and longevity. Here are the key maintenance practices for elastomeric couplings:

1. Visual Inspection:

Regularly inspect the coupling for signs of wear, damage, or misalignment. Look for cracks, tears, or deformations in the elastomeric element and any visible signs of deterioration.

2. Lubrication:

Most elastomeric couplings do not require lubrication, as the elastomeric material acts as a self-lubricating element. However, check with the manufacturer’s recommendations to ensure your specific coupling type does not require any lubrication.

3. Misalignment Check:

Monitor the misalignment between the connected shafts to ensure it stays within the coupling’s allowable limits. Excessive misalignment can lead to premature wear and reduced coupling life.

4. Temperature Limits:

Keep the operating temperature within the specified limits for the elastomeric material. Extreme temperatures can degrade the elastomer and affect its flexibility and performance.

5. Environmental Protection:

Protect the coupling from exposure to chemicals, abrasive particles, and other harsh environmental elements that may accelerate wear and deterioration of the elastomeric material.

6. Regular Maintenance Schedule:

Follow a maintenance schedule recommended by the manufacturer or based on the specific operating conditions of your application. Regularly inspect and replace elastomeric couplings as needed to prevent unexpected failures.

7. Proper Installation:

Ensure the coupling is correctly installed following the manufacturer’s guidelines. Proper installation helps maintain the coupling’s alignment and prevents undue stresses on the elastomeric element.

8. Load Monitoring:

Regularly monitor the load and torque requirements of your application. Avoid overloading the coupling beyond its specified capacity, as this can lead to premature failure.

By following these maintenance practices, you can extend the life of your elastomeric couplings and ensure they continue to provide reliable and efficient power transmission in your industrial system. Remember that each application may have specific maintenance needs, so always refer to the manufacturer’s instructions and consult with experts if needed.

China Professional FCL 315 Flexible Pin Bush Rubber Mechanical Shear Pump Pin Shaft Coupling with Camlock Flange for Spinning and Weaving Machines  China Professional FCL 315 Flexible Pin Bush Rubber Mechanical Shear Pump Pin Shaft Coupling with Camlock Flange for Spinning and Weaving Machines
editor by CX 2024-02-12

China Best Sales Power Trnsmission Double Coupling Manufacturer Single-Disc Type Mechanical Flexible Diaphragm Clamping Disc Coupling

Product Description

Power Trnsmission Double Coupling Manufacturer Single-Disc Type Mechanical Flexible Diaphragm Clamping Disc Coupling

 

Metal flex couplings are disc type couplings in which several flexible metallic elements are alternately attached with bolts to opposite flanges. As polymeric elastomer is replaced by metal disc, Metal Flex coupling provides excellent temperature capability without sacrificing angular and axial misalignment. The coupling provides low axial and bending stiffness while possessing high torsional rigidity. The stretched shim pack design of CHINAMFG Metal Flex couplings provides zero backlash. CHINAMFG Metal Flex couplings are available up to 13367 Nm torque with single shim pack (UMK) and double shim pack (UMS) series.

FEATURES

1.Power to weight ratio high

2.Accommodates angular and axial misalignments

3.High temperature application

4.Visual inspection is possible without dismantling equipments

5.Low axial stiffness with high torsional rigidity

6.High-speed capacity

7.Range up to 12000 Nm

8.Added advantage of stretch fitted shim pack

Material Available

Stainless Steel:SS201,SS301, SS303, SS304, SS316, SS416 etc.
35CrMo 40CrMo42 CrMo
Steel:mild steel, Carbon steel, 4140, 4340, Q235, Q345B, 20#, 45#
Aluminum:AL6061, Al6063, AL6082, AL7075, AL5052, A380 etc.
Iron:A36, 45#, 1213, 12L14, 1215 etc.
Plastic:ABS, PC, PE, POM, Delrin, Nylon, , PP,PEI, Peek
or as customer required .

CNC Turning

φ0.5 – φ300 * 750 mm,+/-0.005 mm

CNC Milling

510 * 1571 * 500 mm(max),+/-0.001 mm-+/-0.005 mm

Surface Finish

Aluminum:Clear Anodized,Color Anodized,Sandblast Anodized,Chemical Film,Brushing,Polishing,Chroming.
Stainless Steel:Polishing,Passivating,Sandblasting,Laser engraving.
Steel:Zinc plating,Oxide black,Nickel plating,Chrome plating,Carburized,
Heat treatment,Powder Coated.
Plastic:Painting,Chrome plating,polishing,Sandblast,Laser engraving.

Drawing Format

IGS,STP,X_T ,DXF,DWG , Pro/E, PDF

Test Equipment

Measurement instrument, Projector, CMM, Altimeter, Micrometer, Thread Gages, Calipers, Pin Gauge etc.

 

 

Production workshop:
 

Manufacturer of Couplings, Fluid Coupling, JAW Coupling, can interchange and replacement of lovejoy coupling and so on.

A coupling can interchange and replacement of lovejoy coupling is a device used to connect 2 shafts together at their ends for the purpose of transmitting power. The primary purpose of couplings is to join 2 pieces of rotating equipment while permitting some degree of misalignment or end movement or both. In a more general context, a coupling can also be a mechanical device that serves to connect the ends of adjacent parts or objects. Couplings do not normally allow disconnection of shafts during operation, however there are torque limiting couplings which can slip or disconnect when some torque limit is exceeded. Selection, installation and maintenance of couplings can lead to reduced maintenance time and maintenance cost.

Company information:

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

disc coupling

Comparison of Disc Couplings with Other Coupling Types

When comparing disc couplings with other coupling types like jaw couplings and elastomeric couplings, several factors come into play:

  • Flexibility: Disc couplings offer high flexibility and misalignment compensation, similar to elastomeric couplings, making them suitable for applications with angular, axial, and parallel misalignment.
  • Torsional Stiffness: Jaw couplings are known for their high torsional stiffness, which is suitable for precision applications. Disc couplings offer a balance between flexibility and stiffness.
  • Misalignment Compensation: Disc couplings excel in accommodating misalignment, whereas elastomeric couplings and jaw couplings are better suited for lower degrees of misalignment.
  • Vibration Damping: Elastomeric couplings provide excellent vibration damping due to their rubber elements. Disc couplings can also dampen vibrations to some extent.
  • Compactness: Jaw couplings and elastomeric couplings are relatively compact, making them suitable for space-constrained applications. Disc couplings are larger in size but offer higher torque capacity.
  • Torque Capacity: Disc couplings generally have higher torque capacity compared to elastomeric couplings and jaw couplings.
  • Installation and Maintenance: Disc couplings and elastomeric couplings are typically easier to install and require less maintenance compared to jaw couplings.
  • Material Options: All three coupling types are available in various materials, allowing for compatibility with different environments.

The choice between disc couplings, jaw couplings, and elastomeric couplings depends on the specific requirements of the application, including torque, misalignment, vibration, and stiffness considerations. Each coupling type has its strengths, and selecting the right one involves evaluating these factors to achieve optimal performance and reliability.

disc coupling

Maintaining and Extending the Lifespan of Disc Couplings

Proper maintenance is crucial to ensure the longevity and reliable performance of disc couplings. Here are the best practices:

  1. Regular Inspections: Conduct visual inspections to identify signs of wear, corrosion, or damage. Regular checks help detect issues early.
  2. Lubrication: Follow manufacturer recommendations for lubrication intervals and use the appropriate lubricants. Proper lubrication reduces friction and wear between disc elements.
  3. Alignment: Ensure proper alignment of the coupling and connected shafts. Misalignment can lead to premature wear and decreased coupling efficiency.
  4. Torque Monitoring: Monitor torque levels and load variations to identify abnormal fluctuations. Address sudden changes promptly to prevent further damage.
  5. Vibration Analysis: Use vibration analysis tools to detect and mitigate excessive vibration. Vibration can accelerate wear and affect machinery performance.
  6. Temperature Management: Monitor operating temperatures to avoid overheating. Excessive heat can lead to premature wear and material degradation.
  7. Load Consideration: Ensure the coupling is not subjected to loads beyond its capacity. Overloading can lead to accelerated wear and potential failure.
  8. Environmental Factors: Protect the coupling from contaminants, moisture, and corrosive substances that can accelerate deterioration.
  9. Timely Repairs: Address any identified issues promptly. Replace worn or damaged components to prevent further degradation.
  10. Professional Assistance: If you encounter complex issues, consider involving experienced technicians or engineers for diagnosis and repair.

Following these practices helps maintain optimal performance, extend the lifespan of disc couplings, and contribute to the overall efficiency and reliability of machinery systems.

disc coupling

Challenges and Solutions for Misaligned Disc Couplings

Misalignment in disc couplings can lead to several challenges, but these issues can be effectively addressed using appropriate measures:

  • Reduced Efficiency: Misalignment can cause increased friction and wear, leading to energy losses and reduced coupling efficiency. Regular maintenance and proper alignment can help mitigate this issue.
  • Vibration and Noise: Misalignment often results in vibrations and noise in the machinery. This can impact the overall performance of the system and cause discomfort to operators. Ensuring precise alignment and using vibration-damping solutions can minimize these effects.
  • Premature Wear: Disc couplings experiencing misalignment may wear out prematurely due to uneven loading and stress concentrations. Optimal alignment and using coupling models designed to handle misalignment can extend the coupling’s lifespan.
  • Imbalanced Loads: Misalignment can lead to imbalanced loads on the coupling discs, causing uneven stress distribution. This can lead to fatigue and failure. Using spacer elements between the discs and proper alignment can distribute the loads more evenly.
  • Reduced Accuracy: In applications requiring precision positioning, misaligned disc couplings can result in inaccurate measurements or positioning. Implementing accurate alignment practices and selecting couplings designed for precise applications can mitigate this challenge.
  • Temperature Rise: Misalignment-induced friction generates heat, leading to temperature rise in the coupling and adjacent components. This can potentially affect the material properties and lead to premature wear. Proper alignment and selecting appropriate lubrication can manage temperature rise.

Addressing misalignment challenges involves a combination of careful installation, routine maintenance, alignment checks, and using coupling designs that offer flexibility and resilience to misalignment. Regular monitoring and addressing misalignment issues promptly can help ensure the longevity and optimal performance of disc couplings.

China Best Sales Power Trnsmission Double Coupling Manufacturer Single-Disc Type Mechanical Flexible Diaphragm Clamping Disc Coupling  China Best Sales Power Trnsmission Double Coupling Manufacturer Single-Disc Type Mechanical Flexible Diaphragm Clamping Disc Coupling
editor by CX 2023-12-25

China OEM Flexible Disc Coupling for Mechanical Industrial

Product Description

coupling is a device used to connect 2 shafts together at their ends for the purpose of transmitting power. Couplings do not normally allow disconnection of shafts during operation, however there are torque limiting couplings which can slip or disconnect when some torque limit is exceeded.

The primary purpose of couplings is to join 2 pieces of rotating equipment while permitting some degree of misalignment or end movement or both. By careful selection, installation and maintenance of couplings, substantial savings can be made in reduced maintenance costs and downtime.

 

DJM 01 Shaft couplings are used in machinery for several purposes. The most common of which are the following.

 

  • To provide for the connection of shafts of units that are manufactured separately such as a motor and generator and to provide for disconnection for repairs or alterations.
  • To provide for misalignment of the shafts or to introduce mechanical flexibility.
  • To reduce the transmission of shock loads from 1 shaft to another.
  • To introduce protection against overloads.
  • To alter the vibration characteristics of rotating units.
  • To connect driving and the driven part
  • To transfer power 1 end to another end.(ex: motor transfer power to pump through coupling)

Disc couplings transmit torque from a driving to a driven bolt tangentially on a common bolt circle. Torque is transmitted between the bolts through a series of thin, stainless steel discs assembled in a pack. Misalignment is accomplished by deforming of the material between the bolts.

 

Please contact us to learn more.

 

 

 

 

ZheJiang shine transmission machinery Co., Ltd is specialized in manufacturing and selling transmission products. Our products are exported to the world famous machinery company in Europe, America, South Africa, Australia, southeast Asia etc. 

Our main products include: European pulley, American pulley, couplings, taper bushing, qd bush, lock element, adjustable motor base, motor rail, sprockets, chain, bolt on hubs, weld on hubs, jaw crusher equipment & spare parts and all kinds of non-standard Casting products etc. 

The good quality of our products is demonstrated in various machinery equipment. For example, mining equipment, grain equipment, fan, air compressor, vacuum pump, woodworking machinery, papermaking machinery, mixing equipment etc. 

Our slogan is”qualified products win customers, good service benefits customers”. By establishing a closer cooperation with old and new clients, We’ Ll be able to guarantee a CHINAMFG situation develop and progress together.

disc coupling

Indicators of Wear or Damage in Disc Couplings

Disc couplings can exhibit signs of wear or damage over time due to factors like misalignment, overloading, or general usage. Detecting these issues early is crucial for preventing further damage. Some common indicators of wear or damage in disc couplings include:

  • Vibration: Excessive vibration during operation can signal misalignment, component wear, or imbalance in the disc coupling.
  • Noise: Unusual noises like clicking, clanking, or rattling can indicate wear, misalignment, or damage in the coupling components.
  • Heat Generation: Excessive heat near the coupling area can suggest friction or misalignment issues.
  • Reduced Performance: Decreased efficiency, torque transmission, or system performance may point to coupling wear or damage.
  • Visual Inspection: Look for signs of visible wear, corrosion, cracks, or deformation on the coupling components.

To detect these signs of wear or damage, regular visual inspections, vibration analysis, and performance monitoring are essential. Early detection allows for timely maintenance or replacement of the affected components, ensuring the continued reliability and safety of the disc coupling and the machinery it serves.

disc coupling

Maintaining and Extending the Lifespan of Disc Couplings

Proper maintenance is crucial to ensure the longevity and reliable performance of disc couplings. Here are the best practices:

  1. Regular Inspections: Conduct visual inspections to identify signs of wear, corrosion, or damage. Regular checks help detect issues early.
  2. Lubrication: Follow manufacturer recommendations for lubrication intervals and use the appropriate lubricants. Proper lubrication reduces friction and wear between disc elements.
  3. Alignment: Ensure proper alignment of the coupling and connected shafts. Misalignment can lead to premature wear and decreased coupling efficiency.
  4. Torque Monitoring: Monitor torque levels and load variations to identify abnormal fluctuations. Address sudden changes promptly to prevent further damage.
  5. Vibration Analysis: Use vibration analysis tools to detect and mitigate excessive vibration. Vibration can accelerate wear and affect machinery performance.
  6. Temperature Management: Monitor operating temperatures to avoid overheating. Excessive heat can lead to premature wear and material degradation.
  7. Load Consideration: Ensure the coupling is not subjected to loads beyond its capacity. Overloading can lead to accelerated wear and potential failure.
  8. Environmental Factors: Protect the coupling from contaminants, moisture, and corrosive substances that can accelerate deterioration.
  9. Timely Repairs: Address any identified issues promptly. Replace worn or damaged components to prevent further degradation.
  10. Professional Assistance: If you encounter complex issues, consider involving experienced technicians or engineers for diagnosis and repair.

Following these practices helps maintain optimal performance, extend the lifespan of disc couplings, and contribute to the overall efficiency and reliability of machinery systems.

disc coupling

Considerations for Selecting a Disc Coupling for a Specific Application

Choosing the right disc coupling for a particular application involves considering several important factors to ensure optimal performance and reliability:

  • Torque Requirements: Determine the maximum and continuous torque requirements of the application. Select a disc coupling that can handle the expected torque without exceeding its rated capacity.
  • Misalignment: Evaluate the type and magnitude of misalignment expected in the system, including angular, parallel, and axial misalignment. Choose a disc coupling with the appropriate misalignment capability to accommodate these factors.
  • Speed and RPM: Consider the operating speed and rotational speed of the connected shafts. High-speed applications may require disc couplings with balanced design to prevent vibration issues.
  • Space Limitations: Evaluate the available space for installing the coupling. Disc couplings are compact and can be suitable for applications with limited space.
  • Environmental Conditions: Assess the operating environment, including temperature, humidity, presence of corrosive agents, and exposure to dust or debris. Choose materials and coatings that can withstand the environmental conditions.
  • Shaft Sizes: Ensure that the disc coupling’s hub bore sizes match the shaft sizes of the connected equipment.
  • Alignment Maintenance: Consider the ease of installation and alignment maintenance. Some disc couplings feature spacer elements that simplify alignment and reduce downtime during maintenance.
  • Backlash: Evaluate the backlash or play that the coupling introduces between the shafts. Backlash can affect the accuracy of position and torque transmission in precision applications.
  • Dynamic Balancing: For high-speed applications, consider disc couplings that are dynamically balanced to prevent vibration issues that can arise from rotational imbalance.
  • Resonance and Damping: Determine if the coupling design includes features to dampen vibrations and reduce the risk of resonance in the system.
  • Service Life: Estimate the expected service life based on the application’s duty cycle and requirements. Choose a disc coupling with a suitable service life to avoid frequent replacements.
  • Cost and Value: Compare the cost of the disc coupling with its features, performance benefits, and expected lifespan. Choose a coupling that provides the best value for your specific application.

By carefully considering these factors, you can select a disc coupling that meets the unique requirements of your machinery system and ensures reliable operation.

China OEM Flexible Disc Coupling for Mechanical Industrial  China OEM Flexible Disc Coupling for Mechanical Industrial
editor by CX 2023-10-10